Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Material: Rubber
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
- Height [mm]: 14
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 10
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO 83- - Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Material: Rubber
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle both sides,
inner - Diameter [mm]: 17
- Weight [kg]: 0.069
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Right, Left - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 40
- Weight [kg]: 0.01
- Manufacturer: CORTECO
-
Engine Code: ABS,
ADZ -
Vehicle Identification Number (VIN) from: 1H-
N- 000 001 - Stabiliser Bar Diameter [mm]: 21.5
- Block Separation:
- Fitting Position: Front Axle both sides
- Diameter [mm]: 19
- Weight [kg]: 0.507
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: repair kit for coupling rod
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Front Axle both sides, Rear Axle Lower - Inner Diameter [mm]: 16
- Quantity per axle: 2
-
Name: Puks -
Kndmik VW P. GOLF II/ III/ IV L/ P - Manufacturer: TED
-
Fitting Position: Front Axle Right,
Front Axle Left - Rod/Strut: Coupling Rod
- Weight [kg]: 0.02
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
- Manufacturer: 3RG
- for OE number: 191 411 315 B S1
- Fitting Position: Front Axle both sides
-
External Thread [mm]: M8 x 1,
25 - Material: Metal
- Spanner Size: 13
- Rod/Strut: Coupling Rod
- Thread Length [mm]: 14
- Supplementary Article/Info 2: with rubber mount
-
Fabrication Number: ZLP-
VW- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Thread Length [mm]: 14
-
External Thread [mm]: M8x1,
25 -
Material: Rubber/
Metal - Supplementary Article/Info 2: with fastening material
- Manufacturer: MERTZ
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Version: Latest
-
Lisainfo: Connecting link for stabilizer,
front, latest type -
Additional information: Connecting link for stabilizer,
front, latest type
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Version: Former
-
Lisainfo: Connecting link for stabilizer,
front, former type -
Additional information: Connecting link for stabilizer,
front, former type
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle
-
Name: Ootshoovad -
Kndmik VW P. GOLF/ JETTA II LE/ PR - Manufacturer: QUARO
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 78
- Rod/Strut: Push Rod
-
Thread Size 1: M12X1,
5 - Manufacturer: GSP
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle
-
External Thread [mm]: M8 x 1,
25 - Material: Metal
-
Name: Ootshoovad -
Kndmik VW P. GOLF/ JETTA II LE/ PR - Manufacturer: MAX
- Quantity per axle: 4
-
Material: PU
(Polyurethane) -
Fitting Position: at axle link,
Front Axle both sides - Rod/Strut: for coupling rod
- Supplementary Article/Info 2: with grease cap
- Manufacturer: TEDGUM
- Name: TG 00727116
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 79
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 51
- Pipe Ø [mm]: 8
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Length [mm]: 77
- Thread Size: MM18X1.25 RHT
- Diameter [mm]: 14
- Rod/Strut: Suspension Rod
- paired article number: 260271
- Weight [kg]: 0.166
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Length from [mm]: 77
- Diameter 1 [mm]: 17
- Material: Steel
-
Axle Joint Thread Type: with right-
hand thread - Quality class: PJ
- Name: Stabilizer link left=right
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Diameter [mm]: 17
- Length [mm]: 75
- Net weight [kg]: 0.23
-
Name: Ootshoovad -
Kndmik VW P. GOLF/ J - Manufacturer: NK
- Lisainfo: .
- Additional information: .
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Width [mm]: 39
- Height [mm]: 39
- Manufacturer: DELPHI
- Name: DE TC1253
-
Vehicle Identification Number (VIN) to: 1H-
SB019 475, 1H- SW062 538 -
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 -
Fitting Position: Front Axle,
Front Axle both sides - Rod/Strut: Coupling Rod
- General Information: coupling rod
- Manufacturer: VIKA
-
External Thread Size: M8 x 1,
25 - Thread Length [mm]: 14
- Spanner Size: 13
- Material: Metal
- Rod/Strut: Coupling Rod
- Supplementary Article/Info 2: with nut
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.165
- Supplementary Article/Supplementary Info: with rubber mounts
-
Name: Ootshoovad -
Kndmik VW P. GOLF/ J. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 79
- Pipe Ø [mm]: 16
- Inner Diameter [mm]: 17
- Name: ALT 78437AL
- Manufacturer: ALTE AUTOMOTIVE
-
External Thread Size: M8 x 1,
25 - Thread Length [mm]: 14
- Spanner Size: 13
- Material: Metal
- Rod/Strut: Coupling Rod
- Supplementary Article/Info 2: with nut
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.165
- Supplementary Article/Supplementary Info: with rubber mounts
- Manufacturer: SWAG
- Name: SW 30 79 0001
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: 12 mm
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Weight [kg]: 0.225
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Rod/Strut: Coupling Rod
- Length [mm]: 77
-
Thread Size 1: M8x1,
25 - Inner Diameter [mm]: 16
- Supplementary Article/Supplementary Info: with accessories
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Ootshoovad -
Kndmik VW P. GOLF/ J - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- for OE number: 191411315B
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Weight [g]: 209
-
Name: IM 30234/
1 - Manufacturer: ORIGINAL IMPERIUM
- Rod/Strut: Suspension Rod
-
Fitting Position: Front Axle,
both sides - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Width [mm]: 40
- Height [mm]: 40
- Weight [kg]: 0.2
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M12x1,
5 -
Thread Size 2: 17,
5 - Max. Length [mm]: 94
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW GOLF II/JETTA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW GOLF II/JETTA
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Width [mm]: 40
- Height [mm]: 50
- Weight [kg]: 0.166
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M8x1,
25 - Max. Length [mm]: 90
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/LUPO/S.AROSA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/LUPO/S.AROSA
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 75
- Diameter [mm]: 15
- Weight [kg]: 0.16
-
Name: DY 30-
88732 - Manufacturer: DYS
-
Trim Level: 16V /
VR6 / GTI - Fitting Position: Front Axle
- Width [mm]: 32
- Height [mm]: 54
- Weight [kg]: 0.14
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - Max. Length [mm]: 80
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW GOLF III/VENTO
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW GOLF III/VENTO
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle both sides
- Rod/Strut: Coupling Rod
- Outer Diameter 1 [mm]: 17
- External Thread 2 [mm]: M8
- Length [mm]: 76
- Weight [kg]: 0.174
- Manufacturer: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.2
- Quantity per axle: 2
-
Rod/Strut: Coupling Rod,
Camber Link - Packaging length [cm]: 14.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 5
- Manufacturer: MONROE
- Rod/Strut: Suspension Rod
-
Fitting Position: Front Axle,
both sides -
Name: Ootshoovad -
Kndmik VW P. GOLF/ JETTA II (KPL) - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 341008
- Rod/Strut: Coupling Rod
- Name: SK VKDS341008
- Manufacturer: SKF
-
Fitting Position: Front Axle,
outer - Required quantity: 2
-
Material: PU
(Polyurethane) - Inner Diameter [mm]: 16
- Name: TG TED55210
- Manufacturer: TEDGUM