Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear,
inner, Front - Production date to: 02.11.2014
- Block Separation:
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
-
Lisainfo: Sensor,
park assist sensor -
Additional information: Sensor,
park assist sensor
-
Fitting Position: Front,
Rear - Sensor Type: Ultrasonic Sensor
- Number of connectors: 3
-
Lisainfo: Sensor,
park assist sensor -
Additional information: Sensor,
park assist sensor
-
Fitting Position: inner,
Rear, Front, both sides, outer, Centre -
Fabrication Number: EPDC-
AU- 008 - Manufacturer: NTY
-
Name: NTY EPDC-
AU- 008
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left Front
- Production date from: 2008
- Production date to: 2011
-
Fabrication Number: EDS-
VW- 050 -
paired article number: EDS-
VW- 051 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Right Front
- Production date from: 2008
- Production date to: 2011
-
Fabrication Number: EDS-
VW- 051 -
paired article number: EDS-
VW- 050 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left Front
- Production date from: 2011
- Production date to: 2016
-
Fabrication Number: EDS-
VW- 052 -
paired article number: EDS-
VW- 053 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Right Front
- Production date from: 2011
- Production date to: 2016
-
Fabrication Number: EDS-
VW- 053 -
paired article number: EDS-
VW- 052 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 12.2011
-
Fitting Position: both sides,
Rear, Front, inner, outer -
Fabrication Number: EPDC-
AU- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left
- General Information: guide profile for front bumper; left
- Manufacturer: DPA
- Fitting Position: Right
- General Information: guide profile for front bumper; right
- Manufacturer: DPA
-
Fitting Position: Front,
Rear - Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
-
Fabrication Number: EPDC-
VW- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left
- General Information: guide profile for front bumper; left
- Manufacturer: DPA
- Fitting Position: Right
- General Information: guide profile for front bumper; right
- Manufacturer: DPA
-
Fitting Position: outer,
Front -
Fabrication Number: EPDC-
AU- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front,
lateral installation - Number of connectors: 3
- Colour: black
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
park assist sensor -
Additional information: Sensor,
park assist sensor
-
Fitting Position: outer,
Front - Construction Year from: 05.2011
- Manufacturer: DELLO AUTOMEGA
- Production date to: 02.11.2014
- Block Separation:
-
Fitting Position: inner,
Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Colour: black
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
-
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Lisainfo: 27-
1293 -
Additional information: 27-
1293
-
Fitting Position: Front,
lateral installation - Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Left,
Right, outer, Front - Construction Year from: 01.2012
- Required quantity: 2
-
for PR number: 7X5,
7X6 - Voltage [V]: 12
- Sensor Type: Ultrasonic Sensor
- Weight [kg]: 0.02
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV046
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
-
Fitting Position: Left,
Right - Colour: black
- Supplementary Article/Supplementary Info: with seal
- Name: MM SDP097
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: outer,
Front - Construction Year from: 05.2011
- Construction Year to: 10.2011
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- for OE number: 4H0 919 275 A
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Fitting Position: Front,
outer, Rear, inner - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
-
Fitting Position: inner,
Rear, Front - Sensor Type: Ultrasonic Sensor
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Number of connectors: 3
- Chemical Properties: Paintable
- Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Sensor Type: Ultrasonic Sensor
- Fitting Position: Rear
- Colour: black
- Shape: angled
- Chemical Properties: Paintable
- Manufacturer: FAST
-
Fitting Position: Front,
Left, Longitudinal, Right, Front and Rear - Construction Year from: 11.2007
- Construction Year to: 09.2015
- Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Weight [kg]: 0.02
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV070
- Construction Year from: 11.2007
- Construction Year to: 09.2015
- Fitting Position: Front
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Number of pins: 3
- Length [mm]: 41
- Diameter [mm]: 16
-
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
- Fitting Position: Left
- Styling: with trim strip
- Surface: Chromed
- General Information: with chromed trim stripe
- Manufacturer: DPA
- Fitting Position: Left
- General Information: reflector frame for fog lamp; left; without hole
- Manufacturer: DPA
-
Fitting Position: Left,
Right, outer, Front - Construction Year from: 05.2011
- Construction Year to: 09.2015
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Fitting Position: Left
- General Information: guide profile; left
- Manufacturer: DPA
- Fitting Position: Rear
- Manufacturer: FAST
- Fitting Position: Right
- General Information: guide profile; right
- Manufacturer: DPA
-
Fitting Position: Front,
Rear - Number of pins: 3
- Sensor Type: Ultrasonic Sensor
- Manufacturer: ZZVF
- for OE number: 3C0 919 275 S
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: TRU
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: Front,
Rear - Voltage [V]: 12
- Number of pins: 3
- Shape: angled
- Manufacturer: FAST
- Number of pins: 3
-
Fitting Position: Rear,
Front
- Fitting Position: Front
- General Information: ultrasound sensor; front; outer
- Manufacturer: VIKA
- Fitting Position: Left
- General Information: reflector frame for fog lamp; left; with hole
- Manufacturer: DPA
- Fitting Position: Rear
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Chemical Properties: Paintable
- Connector Shape: oval
- Housing Colour: black
- Manufacturer: ERA
-
Fitting Position: Rear,
inner, Front - Production date to: 02.11.2014
- Block Separation:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Colour: black
- Colour Code: 9B9
- Number of pins: 3
- Supplementary Article/Supplementary Info: with seal
- Always compare old and new part (in particular OE No.):
-
Name: SENSOR,
PARKIMISABI - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 4
- Fitting Position: Rear Axle
- General Information: ultrasound sensor; rear
- Manufacturer: VIKA
- Construction Year from: 01.2012
-
Fitting Position: Left,
Centre, Right, Front - Quantity: 2
-
for PR number: 7X5,
7X6 -
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.35
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
- Construction Year from: 01.2012
-
Fitting Position: outer,
Left, Right, Front - Quantity: 2
-
for PR number: 7X5,
7X6 -
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.31
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
Vehicle Equipment: for vehicles with semi-automatic parking assistant system
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: Front,
Rear - Surface: primed
- Number of pins: 3
- Shape: straight
- Manufacturer: AIC
Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 4H0 919 275 A
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: TRU
- Fitting Position: Left
- General Information: reflector frame for fog lamp; left; with hole
- Manufacturer: DPA
- Fitting Position: Right
- Styling: with trim strip
- Surface: Chromed
- General Information: with chromed trim stripe
- Manufacturer: DPA
-
Fitting Position: Front,
outer - Construction Year from: 05.2011
- Construction Year to: 10.2011
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Chemical Properties: Paintable
- Manufacturer: METZGER
-
Fitting Position: Front,
inner, Rear, lateral installation - Sensor Type: Ultrasonic Sensor
- Colour: black
- Diameter [mm]: 15.5
- Number of pins: 3
- Connector Shape: oval
- for OE number: 1S0 919 275
- Manufacturer: MEAT&DORIA
- Fitting Position: Left
- Styling: with trim strip
- Surface: Chromed
- General Information: with chromed trim stripe
- Manufacturer: DPA
-
Fitting Position: Front,
Rear - Length [mm]: 40
- Width [mm]: 23
- Height [mm]: 26
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of pins: 3
- Number of connectors: 3
- Chemical Properties: Paintable
- Housing Colour: black
- Weight [kg]: 0.014
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 01.2012
- Required quantity: 2
-
Fitting Position: Centre left,
Centre right, Front -
for PR number: 7X5,
7X6 - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with fastening ring
- Shaft form: round
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141081
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Right
- General Information: reflector frame for fog lamp; right; without hole
- Manufacturer: DPA
- Fitting Position: Left
- General Information: reflector frame for fog lamp; left; without hole
- Manufacturer: DPA
- Construction Year from: 01.2012
- Required quantity: 2
-
Fitting Position: both sides,
outer, Front -
for PR number: 7X5,
7X6 - Number of pins: 3
-
Chemical Properties: Over-
paintable - Mounting Type: Plugged
- Socket colour: black
- Shaft form: round
- Supplementary Article/Supplementary Info: with fastening ring
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141771
- Manufacturer: HELLA
Vehicle Equipment: for vehicles with semi-automatic parking assistant system Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 10.2011
-
Fitting Position: inner,
Front, Rear - Sensor Type: Ultrasonic Sensor
- Surface: primed
- Number of pins: 3
- Shape: angled
- Manufacturer: AIC
Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Production date from: 03.11.2014
-
Fitting Position: Front,
inner, Rear - Block Separation:
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Chemical Properties: Paintable
- Version: AM
- Manufacturer: METZGER
-
Colour: Titanium,
black - Fitting Position: Axle beam
- General Information: vent grille; titan black
- Manufacturer: DPA
- Production date from: 03.11.2014
-
Fitting Position: Front,
inner, Rear - Block Separation:
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Chemical Properties: Paintable
- Connector Shape: angled
- Version: OE
- Manufacturer: METZGER
- Name: Bumper reinforcement
- Quality class: PJ
Lisainfo: TIGUAN, 09.07-04.11 (kvaliteediklass PJ)
-
Fitting Position: outer,
both sides - Construction Year from: 05.2011
- Construction Year to: 10.2011
- Supplementary Article/Info 2: with plug
- Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- Weight [kg]: 0.048
- Number of sensors: 1
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with cable set, with shrink squeeze connector, with seal General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Axle beam
- General Information: foam insert; front bumper
- Manufacturer: DPA
- Construction Year from: 05.2011
- Construction Year to: 09.2015
-
Fitting Position: Left,
Right, outer, Front - Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Supplementary Article/Supplementary Info: with seal
- Surface: primed
- Number of pins: 3
- Number of connectors: 3
-
Chemical Properties: Over-
paintable - Housing Colour: black
- Weight [kg]: 0.016
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2011
- Construction Year to: 09.2015
-
Fitting Position: outer,
Left, Right, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 31
- Width [mm]: 22
- Height [mm]: 35.9
- Number of pins: 3
- Diameter [mm]: 15.5
- Weight [kg]: 0.026
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL
- Construction Year from: 11.2007
- Construction Year to: 09.2015
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 22
- Height [mm]: 26.3
- Number of pins: 3
- Diameter [mm]: 15.5
- Weight [kg]: 0.03
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL
Fitting Position: Front and Rear, outer, inner, Left, Right, Front, Rear
- Construction Year from: 11.2007
- Construction Year to: 09.2015
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 22
- Height [mm]: 29.2
- Number of pins: 3
- Diameter [mm]: 16.1
- Weight [kg]: 0.03
- Manufacturer: VALEO
- Additional information: 890008 VALEO
- Lisainfo: 890008 VALEO
Fitting Position: Longitudinal, Left, Right, Front, Rear, lateral installation
- Quality class: PJ
Lisainfo: TIGUAN, 05.16- (kvaliteediklass PJ)
- Quality class: Q
Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"