• Engine Code: CBAB
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 54
• Weight [kg]: 0.077
• Manufacturer: BLUE PRINT
• Lisainfo: ADV182166 BLUEPRINT
• Additional information: ADV182166 BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-013
• Manufacturer: NTY

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

Fabrication Number: FHO-VW-004

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 58
• Height [mm]: 138
• Transmission Code: 02G, 0BT, DQ 380, DQ 400E, DQ 500
• Manufacturer: KAMOKA FILTRY

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Outer Diameter [mm]: 58, 56
• for OE number: 02E 305 051 C
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Diameter [mm]: 58
• Height [mm]: 106
• Inner Diameter [mm]: 17
• Transmission Type: Automatic Transmission
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-010
• Manufacturer: NTY

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Transmission Code: DSG 7G (0BH)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 53
• Weight [kg]: 0.082
• for OE number: 0BH 325 183 B
• Manufacturer: DENCKERMANN FILTRY

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105
• Outer Diameter [mm]: 58, 56
• Weight [kg]: 0.08
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Version: DP1110.14.0001
• Length [mm]: 105.4
• Weight [kg]: 0.1
• Outer Diameter [mm]: 58, 55.5
• Filter type: Filter Insert
• Manufacturer: DRIVE

Manufacturer: METALCAUCHO

• Transmission Code: DQ 250
• Filter type: Filter Insert
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 17.5
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: ALC

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Piece
• Transmission Code: DQ250
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105.4
• Outer Diameter [mm]: 58, 55.5
• Weight [kg]: 0.08
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB
• Additional information: FE44176
• Lisainfo: FE44176

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: AISIN WARNER
• Quantity Unit: Set
• Transmission Code: 09M, AQ250, AQ450
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Length [mm]: 105.4
• Outer Diameter [mm]: 58, 55.5
• Weight [kg]: 0.08
• Manufacturer: SWAG
• Name: SW 30 94 4176
• Lisainfo: 30 94 4176 SWA
• Additional information: 30 94 4176 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 53.5
• Weight [kg]: 0.077
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB
• Additional information: F107826
• Lisainfo: F107826

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Transmission Type: Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Piece
• Transmission Code: 0BT, DQ400E, DQ500
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without gasket/seal
• Article number of recommended accessories: 113 590
• Housing Type: Metal Housing
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: METALCAUCHO

• Engine Code: CLJA, CFFB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: LWS/LWT/MYB/MYC, MYG/NYD/NZS/RBU
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• for OE number: 0GC 325 183 A
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Filter type: Pre-Filter
• Transmission Code: DQ250
• Model Year to: 2004
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Engine Code: CBAB, CLJA, CFFB
• Transmission ID: AQ 450, JBG/JVZ/JWA/MKD
• Block Separation:
• Filter type: Screen Filter
• Length [mm]: 168
• Width [mm]: 138
• Thickness [mm]: 28
• Weight [kg]: 0.23
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 6-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 53.5
• Weight [kg]: 0.077
• Name: SW 30 10 7826
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Quantity Unit: Piece
• Transmission Code: 09M, AQ250, AQ450
• Manufacturer Restriction: AISIN WARNER
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Filter Insert
• Transmission Code: 02G, DQ 500, DQ 400E, DQ 380
• Transmission Type: 7-Speed Automatic Transmission
• Diameter [mm]: 58
• Height [mm]: 138
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Filter Insert
• Height [mm]: 138
• Transmission Code: DQ500, DQ380, DQ400E
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• for OE number: 0BT 325 429 A
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-014
• Manufacturer: NTY

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Code: DQ500
• Filter type: Filter Insert
• Transmission Type: Manual-/optional automatic transmission
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 17
• Height [mm]: 137
• Manufacturer: HENGST FILTER

• Filter type: Pre-Filter
• Model Year from: 2005
• Transmission Code: DQ250
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Fitting Position: Rear Axle
• Transmission Type: for transfer case
• Transmission Code: HALDEX GEN IV/GEN 4
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with lid
• Manufacturer: MAX
• Lisainfo: 26-2086
• Additional information: 26-2086

Name: Hdraulikafilter, t„isveoga soiduki mitme kettaga sidur

• Transmission Code: DSG7 (DQ500)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: CLJA, CFFB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBAB
• Version: DP1110.14.0043
• Length [mm]: 136
• Weight [kg]: 0.1
• Outer Diameter [mm]: 53.5
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Transmission Type: Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Piece
• Transmission Code: DQ380, 0BT, DQ400E, DQ500
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Transmission Type: 6-Speed Automatic Transmission
• Weight [kg]: 0.36
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CLJA, CFFB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Clutch ID: HALDEX GEN IV / 4
• Model Year from: 2009
• Fabrication Number: FHO-VW-002
• Manufacturer: NTY
• Name: NTY FHO-VW-002

• Transmission Type: 6-Speed Automatic Transmission
• Weight [kg]: 0.36
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual-/optional automatic transmission
• Outer Diameter [mm]: 59
• Inner Diameter [mm]: 17
• Height [mm]: 137
• Manufacturer: HENGST FILTER

• Engine Code: CLJA, CFFB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Name: SW 30 10 7342
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: DSG7 (0BH)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Transmission Type: 6-Speed Automatic Transmission
• Weight [kg]: 0.36
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 30 10 6108
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CFFB
• Transmission Code: DQ500
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Piece
• Filter type: Filter Insert
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MEY

Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Dual-Clutch Transmission

• Filter type: Filter Insert
• General Information: transmission filter repair kit
• Manufacturer: VIKA

• Transmission Code: DQ400E/DQ500
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: 09M
• Supplementary Article/Supplementary Info: with seal
• See accessories list for additionally required parts:
• Weight [kg]: 0.52
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: for 6-speed automatic transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Screen Filter
• Transmission Code: 09M
• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

• Transmission Code: DQ380, DQ400E, DQ500
• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.136
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: AISIN WARNER
• Quantity Unit: Set
• Transmission Code: 09M, AQ250, AQ450
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Code: DQ380, DQ400E, DQ500
• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.121
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: AQ450
• Manufacturer: HENGST FILTER

Transmission Type: 6-Speed Automatic Transmission, Manual-/optional automatic transmission

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 12
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Name: SW 33 10 2944
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Transmission Code: DQ250
• Fitting Position: inner
• Filter type: Pre-Filter, Filter Insert
• Model Year to: 2004
• See accessories list for additionally required parts:
• Vehicle Equipment: for vehicles with direct shift transmission
• Weight [kg]: 0.431
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Transmission Type: for transfer case
• Transmission Code: HALDEX GEN IV/GEN 4
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with lid
• Manufacturer: METZGER

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Filter type: Screen Filter
• Length [mm]: 235
• Width [mm]: 165
• Height [mm]: 65
• Weight [kg]: 0.25
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for article number: 21093
• Manufacturer: MEAT&DORIA

• Construction Year to: 11.2013
• Height [mm]: 61
• Inner Diameter [mm]: 5
• Outer Diameter [mm]: 38
• Weight [kg]: 0.1
• Supplementary Article/Info 2: with bolts/screws, with cap
• Supplementary Article/Supplementary Info: for multi-plate clutch
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2005
• See accessories list for additionally required parts:
• Transmission Code: DQ250
• Fitting Position: inner
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Pre-Filter, Filter Insert
• Weight [kg]: 0.431
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Clutch ID: HALDEX GEN IV / 4
• Supplementary Article/Supplementary Info: with accessories
• Clutch Type: for wet clutch
• Filter type: with housing cover, Filter Insert
• Recommended change interval [years]: 3
• Recommended change interval [km]: 30,000
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with bolts/screws, with seal ring
• Model Year from: 2009
• Weight [kg]: 0.113
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CFFB
• See accessories list for additionally required parts:
• for OE number: 0BH 325 429 B
• Fitting Position: inner
• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Code: DQ500
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.421
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CFFB
• for OE number: 0BT 325 429 A
• See accessories list for additionally required parts:
• Supplementary Article/Info 2: with seal ring
• Fitting Position: inner
• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Code: DQ500
• Weight [kg]: 0.34
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.