Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Lisainfo: Antud 1 tk hind.
- Additional information: Antud 1 tk hind.
- Fitting Position: Front Axle
- Required quantity: 2
- Height [mm]: 222
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
-
Name: Kaitsekaan/
kaitsekumm - Vedrustus/ amordid VW T. - Manufacturer: MAX
- Fitting Position: Rear Axle
- Height [mm]: 160
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Height [mm]: 221.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 215
- Material: Thermoplast
- Manufacturer: DELLO AUTOMEGA
- Quantity: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.041
- Required quantity: 2
- General Information: protective pipe; rear
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 6R-
F- 000 001 -
for PR number: 1JA,
1JB -
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for PR number: 1JS
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Manufacturer: FEB
- Additional information: F22142
- Lisainfo: F22142
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT 05-/TIGUAN/TOURAN/SUPERB 08-
-
for PR number: 1JP,
1JS - Fitting Position: Rear Axle
- Material: Thermoplast
- Height [mm]: 185
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- for PR number: 1JS
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Name: SW 30 92 2142
- Manufacturer: SWAG
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1JK
- Length [mm]: 185
- Material: Thermoplast
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
- Manufacturer: FEB
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. POLO/SEAT IBIZA
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Manufacturer: BORSEHUNG
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Name: SW 30 60 0038
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1JK
- Length [mm]: 185
- Material: Thermoplast
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
- Name: SW 32 93 9249
- Manufacturer: SWAG
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 221.5
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Manufacturer: BORSEHUNG
- for OE number: 1J0513425A
- Fitting Position: Rear Axle
- Height [mm]: 180
- Required quantity: 2
- Material: Thermoplast
- Weight [g]: 58
- Diameter 1 [mm]: 37
- Diameter 2 [mm]: 56
- Name: IM 37372
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid SKODA T OCTAVIA
- Fitting Position: Rear Axle
-
Fabrication Number: AB-
MZ- 034 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/PASSAT/VENTO
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year from: 2015
- Fitting Position: Rear Axle
- Weight [kg]: 0.183
- Packaging length [cm]: 27.4
- Packaging width [cm]: 5.6
- Packaging height [cm]: 5.6
- Manufacturer: FEBEST
-
not for vehicle type: GTi,
WRC, Cross Polo - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Telescopic Shock Absorber
- Name: CFD 564336
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Lisainfo: DSF036G DKM
- Additional information: DSF036G DKM
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMA0132
- Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: ASHIKA
-
Lisainfo: MA-
00034 -
Additional information: MA-
00034
- Vehicle type: Cross Polo
-
not for vehicle type: Cross Polo,
GTi, WRC - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Telescopic Shock Absorber
- Name: CFD 564778
- Manufacturer: DACO
Suspension: for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles with bad road version
-
not for vehicle type: GTi,
WRC, Cross Polo - Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Lisainfo: MJ00030 JAPKO
- Additional information: MJ00030 JAPKO
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMJ0132
- Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- not for vehicle type: Cross Polo
- Block Separation:
- Vehicle type: Cross Polo
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Manufacturer: KAVO
Suspension: for vehicles with bad road version, for vehicles without electronic suspension control
- Block Separation:
- Vehicle type: CrossPolo
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Damper without Rebound Spring
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: 72-
2424 - Name: AMORT
- Manufacturer: MAX
Suspension: for vehicles with heavy duty suspension, for vehicles with bad road version, for vehicles without sports suspension
- Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: SRL
SKODA FABIA 00-
(kvaliteediklass: PJ)"
- not for vehicle type: Cross Polo
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Length 1 [mm]: 648
- Length 2 [mm]: 400
-
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Suspension: for vehicles without electronic suspension control, for vehicles with bad road version
Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"
- not for trim level: Cross Polo
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- for PR number: 1JP
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber Design: Spring-
bearing Damper - Fitting Position: Rear Axle
- Shock Absorber System: Monotube
-
Article number of recommended accessories: 72-
1201 - Name: AMORT
- Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Damper without Rebound Spring
-
Shock Absorber System: Twin-
Tube - Name: Amort
- Manufacturer: MAX
Suspension: for vehicles without sports suspension, for vehicles with standard suspension, for vehicles without electronic suspension control
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH - Name: GH 309915
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH - Name: GH 339915
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Number of Doors: 5
- for combined PR number: 1JA
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.7
- Bore Ø [mm]: 25
- Length 1 [mm]: 418
- Length 2 [mm]: 655
- Piston Rod Diameter [mm]: 11
-
Article number of recommended accessories: MK118,
PK078 - Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
- Additional information: 23890 MONROE
- Lisainfo: 23890 MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
-
not for vehicle type: GTi,
WRC, Cross Polo - Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
-
Lisainfo: MM-
00030 -
Additional information: MM-
00030
Suspension: for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SM0132
- Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Name: Amort
- Manufacturer: MAX
- Trim Level: CROSS
- for PR number: 1JR
- Check OE number:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 649
- Length 2 [mm]: 410
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Number of Doors: 3;5
- for combined PR number: 1JP
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.6
- Bore Ø [mm]: 25
- Length 1 [mm]: 420
- Length 2 [mm]: 631
- Piston Rod Diameter [mm]: 11
-
Article number of recommended accessories: MK118,
PK078 - Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Trim Level: CrossPolo
- Check OE number:
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom Plate -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: MAX
-
Lisainfo: MGA-
5793 -
Additional information: MGA-
5793
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Vehicle type: Cross Polo
-
not for vehicle type: Cross Polo,
GTi, WRC - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: CFD 454240
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles with bad road version
-
not for vehicle type: GTi,
WRC, Cross Polo - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: CFD 450201
- Manufacturer: DACO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
- for PR number: 1JA
- Check OE number:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 633
- Length 2 [mm]: 396
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- not for vehicle type: GTI
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: 100 513 1001
- replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Article number of recommended accessories: SMA0144
- Shock Absorber Mounting Type: Top pin
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Article number of recommended accessories: SMJ0144
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Trim Level: CrossPolo
- Block Separation:
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Piston Rod Diameter [mm]: 12.5
- Suspension Strut Outer Diameter [mm]: 45
- Manufacturer: OPTIMAL ZAWIESZENIE
Suspension: for vehicles with bad road version, for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Pin
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- not for trim level: Polo Cross
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control
- not for vehicle type: Sport Select
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Quality class: PJ
- Name: Gas shock absorber
Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension
-
not for vehicle type: GTi,
WRC, Cross Polo - Shock Absorber Design: Suspension Strut
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Fitting Position: Front Axle
- Article number of recommended accessories: SMJ0144
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JAPKO
Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version
- not for vehicle type: Sport Select
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
Lisainfo: "Tootja: BILSTEIN
SKODA FABIA 02-
(kvaliteediklass: Q)"
- not for trim level: Polo Cross
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Length 1 [mm]: 632
- Length 2 [mm]: 385
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
S.OCTAVIA/VW GOLF IV
(kvaliteediklass: Q)"
- for PR number: G10
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 51
- Length 1 [mm]: 509
- Length 2 [mm]: 361
- Piston Rod Diameter [mm]: 22
- Quantity per axle: 1
- Manufacturer: TRW
- Additional information: JGM1082T
- Lisainfo: JGM1082T
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- for PR number: 1JA
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
- Parameter: SEOV27X213A
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: SAA
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- for PR number: 1JP
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
-
Parameter: ETOV30/
11X201A -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Name: AMORT
- Manufacturer: SAA
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Trim Level: CrossPolo
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
-
Parameter: ETOV30/
11X185A -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Name: Amort
- Manufacturer: SAA
Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694702 - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Lisainfo: 1266230014
- Additional information: 1266230014
Article number of recommended accessories: 100 412 1019/S, 100 412 0019/S, 100 412 2019/S, 100 412 0019, 100 640 0006
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 3.85
- Bore Ø [mm]: 32
- Length 1 [mm]: 360
- Length 2 [mm]: 510
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK077,
MK344, PK076 - Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- not for trim level: Polo Cross
- Block Separation:
- Trim Level: Polo Cross
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Length 1 [mm]: 648
- Length 2 [mm]: 400
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with bad road version, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Rear Axle
- Trim Level: CrossPolo
- Vehicle type: CrossPolo
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 0.86
- Length 1 [mm]: 420
- Length 2 [mm]: 616
-
Article number of recommended accessories: MK118,
PK078 - Packaging length [cm]: 60
- Packaging width [cm]: 7
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
AUDI A3, 97-
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Article number of recommended accessories: SM0144
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: JPA
- Quantity: 2
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: shock absorber; front; gas
- Manufacturer: VIKA
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE32/
22X150A - Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: SAA
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- not for vehicle type: Sport Select
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
AUDI A2/POLO/FABIA
(kvaliteediklass: Q)"
- not for trim level: Polo Cross
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- not for vehicle type: Sport Select
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Name: AMORT
- Manufacturer: BIL
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
Additional information: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
- not for vehicle type: Sport Select
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
Additional information: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
- not for vehicle type: Sport Select
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
- Manufacturer: BILSTEIN
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
Additional information: "Tootja: BILSTEIN
SEAT IBIZA/VW POLO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
SEAT IBIZA/VW POLO
(kvaliteediklass: Q)"
- not for vehicle type: Sport Select
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
- Manufacturer: BILSTEIN
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"