Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Steel
- Shape: C Shape
- Manufacturer: ELRING
- Lisainfo: 591.840 ELR
-
External Thread [mm]: M14x1,
5 - Length [mm]: 16
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5
- Length [mm]: 22
-
External Thread [mm]: M14 x 1,
5 - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CWVB
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Manufacturer: AJUSA
-
Transmission Type: 6-
Speed Automatic Transmission - for PR number: G1A
- Inner Diameter [mm]: 11.7
- Outer Diameter [mm]: 16.5
- Thickness [mm]: 2.2
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 23.8
-
External Thread [mm]: M14 x 1,
5 - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Thread Size: M14 x 1,
5 - Required quantity: 1
- Spanner Size: 19
- Thread Length [mm]: 17.5
- Surface: Phosphatized
- Weight [kg]: 0.032
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Copper
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Additionally required articles (article numbers): 259.150.100
- Spanner Size: SW19
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Length [mm]: 24
-
Thread Size: M14x1,
5 - Material: Steel
- Supplementary Article/Info 2: with seal ring
- Manufacturer: DELLO AUTOMEGA
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Supplementary Article/Info 2: without seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 30
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 18
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 22
-
Thread Size: M14 x 1,
50 - Manufacturer: 3RG
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 2
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 19.8
- DIN/ISO: 7603
- Material: Steel
- Weight [kg]: 0.005
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Spanner Size: SW19
- Supplementary Article/Info 2: with seal ring
- Length [mm]: 29.5
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 17.5
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 29.5
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 17.5
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 29.5
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 17.5
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 32 91 5374 SWA Pikkus (mm): 29,5 Väliskeere [mm]: M14 x 1,5
- Quantity: 1
- Supplementary Article/Info 2: with seal ring
-
Surface: Zinc-
coated - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Length [mm]: 29.5
- Required quantity: 1
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 19
- Screw length below head [mm]: 22
- General Information: seal bolt with sealing ring
- Manufacturer: VIKA
- Material: Steel
-
Thread Size: M14x1,
5 - Length [mm]: 30
- Screw length below head [mm]: 22
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19
- Seal Material: Steel
- Alternative Repair Kit: 8030062
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
-
Thread Size: M14x1,
5x16 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19 mm
- Alternative Repair Kit: 878.070
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
-
External Thread [mm]: M14 x 1,
5 - Required quantity: 1
- Bolt Head-/Nut Design: Hexagon Socket
- Thread Pitch [mm]: 1.5
- for OE number: N 016 027 6
- Fitting Position: engine sided
-
Thread Size: M14 x 1,
5 - Bolt/Nut Version: Flat Head
- Material: Steel
- Thread Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.018
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
External Thread [mm]: M14 x 1,
5 - Supplementary Article/Info 2: with seal ring
- Length [mm]: 29.5
-
Thread Size: M14 x 1,
5 - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
-
Surface: Zink-
nickel coated -
Bolt/Nut Version: Prevent-
loss disc - Thread Length [mm]: 22
- Required quantity: 1
- Material: Steel
- Thread Pitch [mm]: 1.5
- for OE number: N 908 132 02
- Fitting Position: engine sided
- Weight [kg]: 0.064
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Steel
-
Thread Size: M14x1,
5 - Length [mm]: 30
- Screw length below head [mm]: 22
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19
- Seal Material: Steel
- Packing Type: Box
- Quantity: 10
- Alternative Repair Kit: 8030043
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Steel
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Alternatively:
- Material: Steel
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks