• Length 1 [mm]: 10
• Length 2 [mm]: 17.5
• External Thread [mm]: M10 x 1
• Material: Plastic
• Name: OHUTUSKRUVI/-KLAPP, RADIAATOR
• Manufacturer: MAX

• Thread Size: 10 x 1,5
• Length [mm]: 17.5
• Manufacturer: 3RG

• Width [mm]: 10
• Height [mm]: 17.5
• External Thread [mm]: M10 x 1
• Material: Plastic
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CZW-BM-034
• Manufacturer: NTY

• for OE number: 17 11 1 712 788
• Manufacturer: TRUCKTEC

• Length [mm]: 10
• Material: Plastic
• External Thread [mm]: M10x1
• Weight [kg]: 0.002
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10 x 1
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 10, 17.5
• External Thread Size: M10 x 1
• Material: Plastic
• Weight [kg]: 0.005
• Supplementary Article/Info 2: with seal ring
• Name: OHUTUSKRUVI/-KLAPP, RADIAATOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Radiator
• Thread Size: M10x1
• Thread Length [mm]: 12.4
• Total Length [mm]: 17.4
• Material: Plastic
• Bolt Head-/Nut Design: Slot
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Pressure [bar]: 2
• Manufacturer: ASHIKA
• Lisainfo: 33-00-014
• Additional information: 33-00-014

• Pressure [bar]: 2
• Manufacturer: JAPKO

• Pressure [bar]: 1.4
• Manufacturer: ASHIKA

• Climate Zones: not for hot climate zones
• Material: Aluminium
• Core Length [mm]: 440
• Core Width [mm]: 322
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 440*322*34
• Additional information: 440*322*34

Vehicle Equipment: for vehicles with air conditioning (manually controlled)

• Core Length [mm]: 440
• Core Width [mm]: 329
• Core Depth [mm]: 32
• Fabrication Number: CCH-BM-030

• Name: Radiator
• Quality class: ZJ

Lisainfo: 3 E36 91- (kvaliteediklass ZJ)

• Climate Zones: not for hot climate zones
• Material: Aluminium
• Core Length [mm]: 440
• Core Width [mm]: 326
• Core Depth [mm]: 34
• Supplementary Article/Info 2: with mounting parts
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 440*326*34
• Additional information: 440*326*34

Vehicle Equipment: for vehicles with air conditioning (manually controlled)

• Climate Zones: for hot climate zones
• Vehicle Equipment: for vehicles with automatic climate control
• Material: Aluminium
• Core Length [mm]: 435
• Core Width [mm]: 441
• Core Depth [mm]: 34
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Name: Radiator
• Quality class: ZJ

Lisainfo: 3 E30 81-/87- (kvaliteediklass ZJ)

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 440
• Core Width [mm]: 435
• Core Depth [mm]: 32
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 440
• Core Width [mm]: 322
• Core Depth [mm]: 34
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 440
• Core Width [mm]: 322
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank, without frame
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 60735A
• Lisainfo: BMW 5 E34 (88-) 525 ix
• Additional information: BMW 5 E34 (88-) 525 ix

• Climate Zones: for hot climate zones
• Vehicle Equipment: for vehicles with automatic climate control
• Material: Aluminium
• Core Length [mm]: 441
• Core Width [mm]: 435
• Core Depth [mm]: 34
• Supplementary Article/Info 2: with mounting parts
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 441*435*34
• Additional information: 441*435*34

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 440
• Core Width [mm]: 433
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 440
• Core Width [mm]: 433
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Transmission Type: Manual Transmission
• Core Length [mm]: 440
• Core Width [mm]: 326
• Core Depth [mm]: 34
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Brazed cooling fins
• Packaging length [cm]: 78.5
• Packaging width [cm]: 61.5
• Packaging height [cm]: 13.5
• Weight [kg]: 3.24

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 440
• Core Width [mm]: 433
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank, without frame
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Lisainfo: BMW 3 E30 (82-) 316 i
• Additional information: BMW 3 E30 (82-) 316 i

• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: SRL
3 E36 91-
(kvaliteediklass: PJ)"

• Transmission Type: Manual Transmission, Automatic Transmission
• Core Length [mm]: 440
• Core Width [mm]: 440
• Core Depth [mm]: 32
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Brazed cooling fins
• reinforced version:
• Packaging length [cm]: 74.5
• Packaging width [cm]: 50.5
• Packaging height [cm]: 11
• Weight [kg]: 3.64

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Country Specific Design: Japan, Australia
• Core Length [mm]: 440
• Core Width [mm]: 440
• Core Depth [mm]: 30
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Brazed cooling fins
• reinforced version:
• Packaging length [cm]: 79
• Packaging width [cm]: 50.5
• Packaging height [cm]: 11
• Weight [kg]: 4.08

• Vehicle Equipment: for vehicles with automatic climate control
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 440
• Core Width [mm]: 438
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic

• Transmission Type: Manual Transmission
• reinforced version:
• Climate Zones: for hot climate zones, for tropical climate zones
• New Part:
• Radiator type: Mechanically jointed cooling fins
• Heating/Cooling: with thermal switch connector
• Core Length [mm]: 440
• Core Width [mm]: 438
• Core Depth [mm]: 32
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Additionally required articles (article numbers): CRB 22 000P
• Packaging width [cm]: 12.5
• Net Weight [g]: 4,046
• Packaging height [cm]: 58
• Packaging length [cm]: 75
• Name: MH CR330000S
• Manufacturer: MAHLE

Vehicle Equipment: for vehicles with air conditioning, for vehicles with automatic climate control, for vehicles with trailer hitch General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 440
• Core Width [mm]: 439
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 60623A
• Lisainfo: BMW 3 E30 (82-) 316 i
• Additional information: BMW 3 E30 (82-) 316 i

• Vehicle Equipment: for vehicles with air conditioning
• Core Length [mm]: 440
• Core Width [mm]: 440
• Core Depth [mm]: 32
• Transmission Type: Automatic Transmission
• Inlet Ø [mm]: 40
• Outlet Ø [mm]: 40
• Radiator type: Brazed cooling fins
• reinforced version:
• Packaging length [cm]: 73
• Packaging width [cm]: 50
• Packaging height [cm]: 12.5
• Weight [kg]: 3.7

• Vehicle Equipment: for vehicles with trailer hitch
• reinforced version:
• Climate Zones: for tropical climate zones
• Radiator type: Brazed cooling fins
• Heating/Cooling: with thermal switch connector
• Core Length [mm]: 438
• Core Width [mm]: 438
• Core Depth [mm]: 34
• Water Tank Material (radiator): Plastic
• Packaging width [cm]: 13
• Net Weight [g]: 3,895
• Packaging height [cm]: 52.5
• Packaging length [cm]: 69
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission Type: Manual Transmission, Automatic Transmission
• reinforced version:
• Climate Zones: for hot climate zones, for tropical climate zones
• New Part:
• Radiator type: Brazed cooling fins
• Heating/Cooling: with thermal switch connector
• Core Length [mm]: 440
• Core Width [mm]: 436
• Core Depth [mm]: 34
• Water Tank Material (radiator): Plastic
• Additionally required articles (article numbers): CRB 22 000P
• Manufacturer: produced by MAHLE
• Packaging width [cm]: 12
• Net Weight [g]: 3,924
• Packaging height [cm]: 62
• Packaging length [cm]: 85
• Name: Radiaator,mootorijahutus

Vehicle Equipment: for vehicles with air conditioning, for vehicles with automatic climate control, for vehicles with trailer hitch, for vehicles with/without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Climate Zones: for hot climate zones
• Vehicle Equipment: for vehicles with automatic climate control
• Material: Aluminium
• Core Length [mm]: 440
• Core Width [mm]: 435
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins