• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 340
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Exhaust System: for pre-catalytic converter
• for OE number: 11781247406
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 340
• Number of pins: 4
• Weight [g]: 92
• Gross Weight [g]: 122
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
5 TOURING (E39), 01.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
5 TOURING (E39), 01.
(kvaliteediklass: Q)"

• Connector Shape: rectangular
• Thread Size: M12
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.2
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Number of pins: 4
• Colour: black
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

Fabrication Number: ECT-BM-010

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M44 B19 (194S1)
• Pressure [bar]: 0
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Tightening torque from [Nm]: 50
• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Tolerance [%]: 10
• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZL006097001

• Length [mm]: 68
• Housing Colour: black
• Spanner Size: 22
• Manufacturer: KAMOKA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 68
• Spanner Size: 22
• Colour: black
• Number of pins: 4
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.034
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621703993
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Fabrication Number: ECT-BM-013
• Manufacturer: NTY

• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY
• Name: CE 17SKV689

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Combi Switch Function: Normally Closed Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M12 x 1,5
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Housing Diameter [mm]: 13
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 40
• Mounting Type: Pressed
• for OE number: 13 62 1 739 510, NNK000020
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Length [mm]: 79
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Number of pins: 4
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 13621703993, MEK000020, MEK100160A

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• External Thread [mm]: M 12x1,5
• Manufacturer: ERA

• Thread Size: M12x1,5
• Spanner Size: 24
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL009600271
• Manufacturer: HELLA

• Length [mm]: 78.5
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 550
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: M44 B19 (194S1)
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Thread Size: 13 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Vehicle Equipment: for vehicles with air conditioning
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 3
• Cable Length [mm]: 590
• Fitting Depth [mm]: 21
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 20 93 2915

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M44 B19 (194S1)
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: M44 B19 (194S1)
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 3
• Name: Andur,drosselklapiasend
• Manufacturer: MAX

• Length [mm]: 370
• Fabrication Number: ESL-BM-003
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Sensor Type: Active sensor
• Supplementary Article/Info 2: with seal ring, with cable
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 02.1998
• Engine Code: M44B19
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253820
• Additional information: VAL253820

• Length [mm]: 615
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11018

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Sensor Type: Hall Sensor
• Cable Length [mm]: 535
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: M44 B19 (194S1)
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 340
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Quality: IAM
• Manufacturer: METZGER

• Lambda Sensor: Regulating Probe, Finger probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Resistor [Ohm]: 2.1
• Length [mm]: 350
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 350
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Cable Length [mm]: 330
• Conductor Number: 4
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.124
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Engine Code: M44 B19 (194S1)
• Cable Length [mm]: 990
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X5 (E53), 05.00-
(kvaliteediklass: PJ)"

• Engine Code: M44 B19 (194S1)
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 430
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV080
• Manufacturer: ESEN SKV

• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV666
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: M44 B19 (194S1)
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: AUTO-GH

• Number of pins: 4
• Connector Shape: round
• Housing material: Plastic
• Recommended additional repairs: Air Filter
• New Part:
• Name: OHUMASSIMOOTJA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M44 B19 (194S1)
• Length [mm]: 225
• Cable Length [mm]: 315
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE
• Additional information: MD77243
• Lisainfo: MD77243

• Number of pins: 3
• Cable Length [mm]: 430
• Fitting Depth [mm]: 30
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Number of pins: 4
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 350
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 800
• Number of pins: 4
• Fitting Position: after catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 370
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Supplementary Article/Info 2: without cable
• Rated Voltage [V]: 5
• for OE number: 13 63 1 721 456
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Number of pins: 4
• Housing Colour: black
• Manufacturer: METZGER

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Number of pins: 9
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424