• Fitting Position: Front Axle
• Brake System: Teves
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Rear Axle
• Brake Caliper Type: Brake Caliper with 1 holding pin
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.06

• Fitting Position: Front Axle
• Brake System: ATE
• Length 1 [mm]: 95
• Brake Type: Disc Brake

• Block Separation:
• Length [mm]: 94
• Number of connectors: 1
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: FEB

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 94
• Weight [kg]: 0.004
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Block Separation:
• Length [mm]: 94
• Brake Type: Disc Brake
• for OE number: 126 540 20 17
• Number of pins: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right, Front Axle, Rear Axle

• Block Separation:
• Length [mm]: 94
• Number of connectors: 1
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Length [mm]: 94
• Number of connectors: 1
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: FEB

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 94
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 2
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake System: ATE, dos piezas
• Name: LISAKOMPLEKT,PIDURISADUL
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 90
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 93
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 90
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.003
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Length [mm]: 15
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Hex-5
• Name: Kruvi,piduriketas
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• Brake Caliper Type: Brake Caliper with 1 holding pin

• Fitting Position: Rear Axle
• Brake System: ATE
• Brake Caliper Type: Brake Caliper with 2 holding pins
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Length [mm]: 15
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Hex-5
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle
• Brake System: Teves
• Weight [kg]: 0.03
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle Right
• Overall Length [mm]: 496
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 436
• paired article number: 30248
• Weight [kg]: 0.07
• Manufacturer: A.B.S.
• Lisainfo: NRF30249
• Additional information: NRF30249

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with manual transmission
• Suspension: for vehicles with standard suspension
• Braking/Drive Dynamics: for vehicles with ESP
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Fitting Position: Front Axle
• Brake System: ATE (Teves), Motorcraft
• Manufacturer: FRENKIT
• Name: FR 901180

• Fitting Position: Front Axle
• Brake System: Ate
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Brake System: Ate
• Manufacturer: ERT

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.02
• Spring Design: Wire Spring
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901217

• Brake System: ATE
• Name: Vedru, Pidurisadul
• Manufacturer: ATE
• Lisainfo: 11.8116-0356.1
• Additional information: 11.8116-0356.1

• Fitting Position: Front Axle
• Brake System: ATE
• Name: SE D4-3041A
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity: 4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake pads fitting kit
• Quality class: PJ

Additional information: "Tootja: DELPHI
KLASA C KOMBI (S202)
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
KLASA C KOMBI (S202)
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Construction Year to: 08.2006
• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Brake Caliper Type: Brake Caliper with 2 holding pins
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Left, Front Axle Left
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.058
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 590
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 517
• paired article number: 30133
• Weight [kg]: 0.06
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 590
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 517
• paired article number: 30134
• Weight [kg]: 0.06
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Overall Length [mm]: 496
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 436
• paired article number: 30249
• Weight [kg]: 0.06
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Required quantity: 1
• Cable Length [mm]: 517
• Fitting Depth [mm]: 25
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 517
• Fitting Depth [mm]: 25
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Cable Length [mm]: 456
• Fitting Depth [mm]: 27.7
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI