• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

• Engine Code: EGZ
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Thread Size: 15 mm
• Manufacturer: CALORSTAT BY VERNET

• for OE number: 003 153 28 28
• Fabrication Number: ECP-CH-020
• Manufacturer: NTY

• Fabrication Number: ECP-ME-001
• Manufacturer: NTY

• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Engine Code: EGZ
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Manufacturer: ERA

• Height [mm]: 18.2
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Active sensor
• for OE number: 46432103
• Manufacturer: KAMOKA
• Additional information: 108-014-375
• Lisainfo: 108-014-375

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Engine Code: EGZ
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: MEYLE

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Engine Code: EGZ
• Name: EP 1.953.578
• Manufacturer: EPS

• Pinge [V]: 12
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Värvimarkeering: hall
• Kinnitusaukude hulk: 1
• Manufacturer: FAST

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 40
• valikuliselt:
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• alternatiivne remondikomplekt: 550275
• Takistus [koom]: 1
• Manufacturer: ERA

• Värv: must
• Anduritüüp: passiivne andur, Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: D-kuju
• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Manufacturer: FAST

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Name: SW 10 92 4455
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Overall Length [mm]: 260
• Number of circuits: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-CH-012
• Manufacturer: NTY

• Engine Code: EGZ
• Length [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Housing Type: with housing
• Fabrication Number: EPP-CH-006
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL
• Lisainfo: VAL253825
• Additional information: VAL253825

• Engine Code: EGZ
• Name: EP 1.953.387
• Manufacturer: EPS

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 254008

• Construction Year to: 08.2006
• Lambda Sensor: Regulating Probe, Finger probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Pinge [V]: 12
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Kaal (kg): 0,35
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV026

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, Right, after catalytic converter
• Transmission Type: Automatic Transmission, Manual Transmission
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Lambda Sensor: Diagnostic Probe
• Exhaust System: after catalytic converter
• Pinge [V]: 12
• Pikkus (mm): 480
• Ülekandeliinide arv: 4
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV057

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, after catalytic converter
• Transmission Type: Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 260
• Name: Lambda andur
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 300
• Ülekandeliinide arv: 4
• Kaal (kg): 0,12
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV619

• Transmission Type: Automatic Transmission
• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: Left, Right
• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 800
• Manufacturer: MEAT&DORIA

• Transmission Type: Automatic Transmission
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 660
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV643

• Engine Code: EGZ
• Fitting Position: Left Front, before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Right
• Transmission Type: Automatic Transmission, Manual Transmission
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 08.2006
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, after catalytic converter
• Transmission Type: Automatic Transmission
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Block Separation:
• Cable Length [mm]: 380
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 08.2006
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Cable Length [mm]: 280
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Exhaust System: after catalytic converter
• Fitting Position: Right
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VERNET

• Engine Code: EGZ
• Fitting Position: after catalytic converter
• Transmission Type: Automatic Transmission
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Fitting Position: Left, after catalytic converter
• Transmission Type: Manual Transmission
• Construction Year to: 08.2006
• Length [mm]: 300
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Fitting Position: after catalytic converter, Left
• Transmission Type: Manual Transmission
• Lambda Sensor: Planar probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 260
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10467-12B1

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Right
• Number of circuits: 4
• Overall Length [mm]: 450
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Overall Length [mm]: 340
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 08.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Transmission Type: Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 260
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: EGZ
• Fitting Position: Left, Right, Front, before catalytic converter
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Fitting Position: Left, after catalytic converter
• Transmission Type: Automatic Transmission
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Manufacturer: FAE