• Engine Code: IQDA
• Housing Colour: grey
• Housing Type: Synthetic Material Housing
• Plug Type: Male
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: EP 1.830.285
• Manufacturer: EPS

Fabrication Number: ESS-FR-003

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: IQDA
• Required quantity: 2
• Name: EP 1.953.361
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: DELPHI

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: anthracite
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163921

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Length [mm]: 373
• Number of pins: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-FR-008

Lisainfo: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM Additional information: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM

• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2015
• Engine Code: IQDB
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 253804

• Engine Code: IQDA
• Required quantity: 2
• Length [mm]: 450
• Name: EP 1.957.091
• Manufacturer: EPS

• Housing Type: without housing
• Fabrication Number: EPP-FR-004

• Housing Type: without housing
• Fabrication Number: EPP-FR-003

• Lambda Sensor: Lambda Sensor
• Length [mm]: 373
• Number of pins: 4
• Warranty: 3 years warranty
• Name: CE 09SKV135
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: without housing
• Number of pins: 6
• Used part return not required:
• Fabrication Number: EPP-FR-006

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 375
• Name: DE ES20025-12B1
• Manufacturer: DELPHI
• Additional information: ES20025-12B1 DELPHI
• Lisainfo: ES20025-12B1 DELPHI

• Number of pins: 6
• Housing Type: without housing
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Housing Type: without housing
• Number of pins: 6
• Recommended additional repairs: Air Filter
• Supplementary Article/Info 2: Can only be fitted with original mounting
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: IQDA, IQDB
• Voltage [V]: 12
• Length [mm]: 770
• Number of circuits: 4
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV003
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 393
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV048
• Manufacturer: ESEN SKV

• Number of connectors: 2
• Weight [kg]: 0.065
• for OE number: C201-18-921
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Length [mm]: 525
• Number of connectors: 4
• Manufacturer: VERNET

• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.085
• for OE number: 1 300 544
• Name: SW 33 10 3139
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Heated, Regulating Probe
• Cable Length [mm]: 400
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 478
• Number of circuits: 4
• Cable Length [mm]: 478
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM125

• Length [mm]: 345
• Conductor Number: 4
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 345
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM070

• Engine Code: IQDA
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.296
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Number of pins: 2
• Cable Length [mm]: 450
• Tightening Torque [Nm]: 20
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108731
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 720
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV577
• Manufacturer: ESEN SKV

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 525
• Number of circuits: 4
• Cable Length [mm]: 525
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM090

• Construction Year to: 03.2015
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Right
• Wheelbase: short wheelbase, long wheelbase
• Block Separation:
• Number of circuits: 4
• Manufacturer: BOSCH
• Name: BS 0258986777

• Wheelbase: short wheelbase
• Recommended change interval [km]: 250,000
• Lambda Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 390
• Weight [kg]: 0.112
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358103211

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 03.2015
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Wheelbase: short wheelbase, long wheelbase
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: before catalytic converter, after catalytic converter, Left, Right

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10374-12B1

• Required quantity: 1
• Construction Year to: 04.2011
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Manufacturer: BREMI

• Name: MM AMMQ19767
• Manufacturer: MAGNETI MARELLI

• for OE number: 1351337, 1088851
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 450
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO
• Name: DN DOX-2004
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FOCUS II KOMBI (DAW/
(kvaliteediklass: Q)"

• Construction Year to: 03.2015
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Wheelbase: long wheelbase
• Number of circuits: 4
• Overall Length [mm]: 628
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006571

• Construction Year to: 03.2011
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 03.2015
• Engine Code: IQDB
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368031
• Manufacturer: VALEO

• Required quantity: 1
• Construction Year from: 04.2011
• Voltage [V]: 12
• Number of pins: 6
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year to: 03.2015
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Wheelbase: short wheelbase
• Overall Length [mm]: 557
• Manufacturer: BOSCH
• Name: BS 0258986785

• for OE number: 1536254, 1322706
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 525
• Number of pins: 4
• Weight [g]: 118
• Gross Weight [g]: 151
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
FOCUS C-MAX, 10.03-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FOCUS C-MAX, 10.03-0
(kvaliteediklass: Q)"

• Fitting Position: Left
• for OE number: 1327549, 1302222
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 725
• Number of pins: 4
• Weight [g]: 126
• Gross Weight [g]: 159
• Manufacturer: DENSO
• Name: DN DOX-2068

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Resistor Type: Hot-film Sensor
• Number of connectors: 4
• Weight [kg]: 0.043
• Housing Type: without housing
• for OE number: 1 480 570
• Name: SW 50 10 5909
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 11.04.2011
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Construction Year from: 04.2011
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142591

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Resistor Type: Hot-film Sensor
• Number of connectors: 4
• Weight [kg]: 0.043
• Housing Type: without housing
• for OE number: 1 480 570
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2011
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2505088
• Manufacturer: HUECO / HITACHI

• Construction Year from: 04.2011
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2505081
• Manufacturer: HUECO / HITACHI

• Construction Year to: 03.2011
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Construction Year to: 03.2015
• Engine Code: IQDB
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.123
• Name: VA 368239
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 04.2011
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year from: 04.2011
• Construction Year to: 03.2015
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Construction Year from: 04.2011
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO