• Fitting Position: Front Axle, outer, Lower
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 62
• Length [mm]: 25
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.1

Lisainfo:

NK PRO - TUGEVAM ja VASTUPIDAVAM

• Fitting Position: Front Axle, inner, Lower
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.32

• Lisainfo: AUDI 100 / 200 AVANT / QUA
• Additional information: AUDI 100 / 200 AVANT / QUA

• Fitting Position: Lower Front Axle, inner
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 56
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 15
• Material: Steel
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. USTALAJ¤CA
• Manufacturer: MEY

• Height [mm]: 56
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 14.3
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Outer Diameter [mm]: 51
• Inner Diameter [mm]: 16
• Width [mm]: 25
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: MAX

• Fitting Position: Front Axle, Lower, both sides
• Required quantity: 4
• Name: Puks
• Manufacturer: TED

• Trim Level: EXC. QUATTRO
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO HB 95-/AROSA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO HB 95-/AROSA
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 34
• for OE number: 431505172
• Manufacturer: SASIC

• Fitting Position: Front Axle, both sides, outer
• Outer Diameter [mm]: 63
• Height 1 [mm]: 21
• Height 2 [mm]: 25
• Manufacturer: KAMOKA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 100, -91
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 100, -91
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.09
• Name: DY 37-82078
• Manufacturer: DYS

• Construction Year from: 01.1991
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 16.5
• Outer Diameter [mm]: 45
• for OE number: 4A0407181A
• paired article number: 9001545
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) from: 4A-M-000 001
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower Front Axle, inner
• Material: Rubber/Metal
• Outer Diameter [mm]: 54
• Manufacturer: KAMOKA

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 26, 63
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100, 90-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100, 90-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: BGA

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Material: Rubber/Metal
• Thickness [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 55, 26
• Manufacturer: MERTZ

• Fitting Position: Lower Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle, both sides
• Axle alignment required after fitting:
• Weight [kg]: 0.122
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, outer
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.1
• Manufacturer: CORTECO
• Name: COC 21652143

• Vehicle Identification Number (VIN) from: 4A-M-000 001
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Length from [mm]: 56.3
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 15
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT IBIZA/CORD.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 54.5
• Inner Diameter [mm]: 14
• Width [mm]: 29
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, inner, both sides
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: MAX

• Fitting Position: outer, Lower, Front Axle both sides
• Required quantity: 4
• paired article number: VKDS 331055
• Height [mm]: 25
• Inner Diameter [mm]: 16.2
• Outer Diameter [mm]: 62.7
• Name: SK VKDS331055
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Quantity per axle: 2
• Control/Trailing Arm Type: for trailing arm
• Weight [g]: 124
• Name: IM 1611
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 100 91-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 100 91-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 57
• Outer Diameter [mm]: 63
• Manufacturer: MERTZ

• Fitting Position: Front Axle, outer, Lower
• Inner Diameter 1 [mm]: 16
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 24
• Manufacturer: DELPHI
• Name: DE TD482W

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 25
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 62
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.

• Fitting Position: inner, Front Axle
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14.8
• Outer Diameter [mm]: 54.5
• Weight [kg]: 0.2
• Manufacturer: CORTECO
• Name: COC 21652307

• Fitting Position: Front Axle, inner, Lower
• Inner Diameter 1 [mm]: 15
• Outer Diameter 1 [mm]: 55
• Thickness 1 [mm]: 48
• Manufacturer: DELPHI
• Name: DE TD474W

• Vehicle Identification Number (VIN) from: 4A-M-000 001
• Length [mm]: 56.3
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 14.5
• Fitting Position: Front Axle
• Weight [kg]: 0.01
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per axle: 4
• Control/Trailing Arm Type: for control arm
• Manufacturer: LMI
• Lisainfo: 10079 01 LEM
• Additional information: 10079 01 LEM

SVHC: No information available, please contact the manufacturer! Name: Puks - K„„ndmik VW P. A100/A6 90- (DO STABILIZATORA)

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 100, 90-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 100, 90-
(kvaliteediklass: PJ)"

• Thickness [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 55, 26
• Material: Rubber/Metal
• Fitting Position: Lower Front Axle, inner
• Weight [kg]: 0.239
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 26, 55
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100, 90-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100, 90-
(kvaliteediklass: PJ)"

• Thickness [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 54.5, 26
• Material: Rubber/Metal
• Fitting Position: Lower Front Axle, inner
• Weight [kg]: 0.269
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, both sides, outer
• Length [mm]: 25
• Outer Diameter [mm]: 62
• Inner Diameter [mm]: 16
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Drive Type: All-wheel Drive
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Rear Axle Right, Rear
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331057
• Length [mm]: 47.8
• Height [mm]: 54.5
• Inner Diameter [mm]: 14.8
• Outer Diameter [mm]: 54.5
• Name: SK VKDS331057
• Manufacturer: SKF

• Thickness [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 55, 26
• Material: Rubber/Metal
• Fitting Position: Lower Front Axle, inner
• Weight [kg]: 0.237
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Right, Front Axle Left, Lower, inner
• Height [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: without holder
• Supplementary Article/Info 2: with mounting sleeves
• Quantity Unit: Set
• reinforced version:
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: MEY

• Trim Level: EXC. QUATTRO
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Suspension beam bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI 100 91-94 /A6
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI 100 91-94 /A6
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.34
• Name: DY 37-24836
• Manufacturer: DYS

• Fitting Position: inner, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 48
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: MEY

General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution.

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, inner, both sides
• Name: Puks - K„„ndmik VW P. A100/A6
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!