• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles without leveling control
• Inner Diameter [mm]: 10
• Material: Rubber/Metal
• Fitting Position: Rear Axle both sides
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/200/A6
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100/200/A6
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Height [mm]: 186
• Required quantity: 2
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Vehicle Equipment: for vehicles without leveling control
• Inner Diameter [mm]: 10
• Height [mm]: 40
• Outer Diameter [mm]: 80
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.175
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Vehicle Equipment: for vehicles without leveling control
• Inner Diameter [mm]: 10
• Height [mm]: 40
• Outer Diameter [mm]: 80
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.175
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0020

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Rear Axle
• Width 1 [mm]: 36
• Outer Diameter 1 [mm]: 79
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB957.01

• not for vehicle type: S4
• Fitting Position: Rear Axle
• Manufacturer: KYB

Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Fitting Position: Rear Axle
• Suspension: for vehicles without stabiliser bar
• Vehicle Equipment: for vehicles without leveling control
• SVHC: No SVHC present!
• Name: LU 814010010
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Bearing Type: Angular Ball Bearing
• Lisainfo: Ball bearing for strut bearing
• Additional information: Ball bearing for strut bearing

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 431412249D
• Fitting Position: Front Axle
• Required quantity: 2
• Weight [g]: 100
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 15
• Inner Diameter [mm]: 81
• Outer Diameter [mm]: 102
• Name: IM 30790
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 10
• Name: BI 12-244706
• Manufacturer: BILSTEIN

• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 112
• Inner Diameter [mm]: 91
• Name: Laager - K„„ndmik VW
• Manufacturer: MAX

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MAX

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 112
• Inner Diameter [mm]: 91
• for OE number: 4A0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles without leveling control
• not for vehicle type: S4
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 73
• Manufacturer: DELLO AUTOMEGA

• for OE number: 4A0412249
• Fitting Position: Front Axle
• Weight [g]: 143
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Name: IM 30792
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0009

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Width [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Name: Laager - K„„ndmik VW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with standard suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 4A-N-040000
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 4A0 412 377 A, 4A0 412 377 B, 4A0 412 377 C
• Name: Laager - K„„ndmik. VW P. A100 91-7/94/ A6 94-97
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI

• Width [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Name: SW 30 54 0019
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without leveling control
• not for vehicle type: S4
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 4A-N-040000
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 4A0 412 377 A, 4A0 412 377 B, 4A0 412 377 C
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: JPA

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid NISSAN P.

• Fitting Position: Right, Front Axle
• Width 1 [mm]: 15
• Outer Diameter 1 [mm]: 112
• Manufacturer: SNR /NTN-SNR/
• Name: SN M257.02

• Fitting Position: Front Axle
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Height [mm]: 15
• Bearing Type: Rolling Bearing
• Name: Laager - K„„ndmik VW
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Bearing for strut with bearing, front
• Additional information: Bearing for strut with bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.7
• Required quantity: 2
• Alternative Repair Kit: 80001652
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 80000242

• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 73
• Height [mm]: 41
• Manufacturer: 3RG

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
AUDI 100
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0013

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)"

• not for vehicle type: S4
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Fitting Position: Front Axle
• Weight [kg]: 0.1
• Packaging length [cm]: 14.3
• Packaging width [cm]: 4.1
• Packaging height [cm]: 14.3
• Manufacturer: MONROE

• Fitting Position: Rear Axle
• Name: SE D5-091
• Manufacturer: AUTOFREN SEINSA

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MEY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Name: SW 30 55 0005

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.98
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Name: SE D5-140
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.7
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.09

• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BILSTEIN
• Name: BI 12-117338

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• not for vehicle type: S4
• Fitting Position: Front Axle
• Manufacturer: KAYABA
• Name: KY SM5183