Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle both sides,
outer - Material: Rubber
- Inner Diameter [mm]: 13
- Manufacturer: MERTZ
-
Stabiliser Bar Diameter [mm]: 21,
22 -
Vehicle Identification Number (VIN) from: 81-
F- 150001 - Block Separation:
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 20
- Shape: slotted
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
-
Vehicle Identification Number (VIN) from: 81-
D- 077 974 - Vehicle Equipment: for vehicles with power steering
- Mounting Type: Rubber Mount
- Manufacturer: DELLO AUTOMEGA
-
Stabiliser Bar Diameter [mm]: 21,
22 - Block Separation:
-
Fitting Position: Front Axle Left,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 81-
F- 150 001 -
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 20
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle,
outer - Vehicle Equipment: for vehicles without power steering
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 12.5
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle both sides,
inner - Material: Rubber
- Inner Diameter [mm]: 20
- Manufacturer: MERTZ
-
Fitting Position: Front,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 13
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT ZEW - Manufacturer: MAX
-
Fitting Position: Front Axle,
inner - Vehicle Equipment: for vehicles without power steering
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 20
- SVHC: No SVHC present!
- Manufacturer: FAG
- Block Separation:
-
Vehicle Identification Number (VIN) to: 81-
D- 077 973 -
Fitting Position: Front Axle Left,
Front Axle Right, outer - Inner Diameter [mm]: 13
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Vehicle Equipment: for vehicles without power steering, for vehicles with power steering
-
Fitting Position: Front Axle,
inner, Right, Left -
Vehicle Identification Number (VIN) from: 81-
F- 150 001 - Diameter [mm]: 20
- Manufacturer: CORTECO
-
Stabiliser Bar Diameter [mm]: 21,
22 -
Vehicle Identification Number (VIN) from: 81-
F- 150001 - Block Separation:
-
Fitting Position: Front Axle Left,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 12.5
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 81-
D- 077 973 - Block Separation:
- Inner Diameter [mm]: 12.5
- Material: Rubber
-
Fitting Position: Front Axle,
outer - Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT ZEW. 18MM - Manufacturer: FEB
Vehicle Equipment: for vehicles with power steering, for vehicles without power steering General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 81-
F- 150 000 - Inner Diameter [mm]: 20
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT WE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 81-
D- 077 973 - Block Separation:
- Inner Diameter [mm]: 12.5
- Material: Rubber
-
Fitting Position: Front Axle,
outer - Weight [kg]: 0.03
- Manufacturer: SWAG
Vehicle Equipment: for vehicles with power steering, for vehicles without power steering General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 18
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.085
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 81-
F- 150 001 -
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 20
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A80 W - Manufacturer: MEY
-
Vehicle Identification Number (VIN) from: 81-
F- 150 000 - Inner Diameter [mm]: 20
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.03
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 81-
D- 077 973, 81- E- 220 000 - Block Separation:
- Inner Diameter [mm]: 19
- Material: Rubber
-
Fitting Position: Front Axle,
inner - Weight [kg]: 0.047
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT WE - Manufacturer: FEB
Vehicle Equipment: for vehicles with power steering, for vehicles without power steering General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
-
Vehicle Identification Number (VIN) from: 81-
D- 077974 -
Stabiliser Bar Diameter [mm]: 21,
22 - Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.085
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Block Separation:
-
Vehicle Identification Number (VIN) to: 81-
D- 077 973 -
Fitting Position: outer,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 13
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT ZEW. 18MM - Manufacturer: MEY
Vehicle Equipment: for vehicles without power steering, for vehicles with power steering
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
- Vehicle Equipment: for vehicles with power steering
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer link mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 12.5
-
Name: Paigutus -
Kndmik VW P. A80/ PASSAT ZEW. 18MM - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: engine sided,
Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 351029
- Length [mm]: 46
- Height [mm]: 54
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 54
- Name: SK VKDS351029
- Manufacturer: SKF
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks