• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• Colour Coding: blue
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year from: 08.1980
• Number of pins: 7
• Coil Ignition System: Transistor Ignition (TI)
• Lisainfo: Switch unit for TCI
• Additional information: Switch unit for TCI

• Vehicle Identification Number (VIN) to: 81-H-299 000
• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Number of pins: 1
• Colour: black
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: white
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 1
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• for OE number: 049919563B
• Manufacturer: KAMOKA
• Lisainfo: 4080049 KAMOKA
• Additional information: 4080049 KAMOKA

• Length [mm]: 25
• Housing Colour: black
• Spanner Size: 14
• Temperature range to [°C]: 125
• Manufacturer: KAMOKA

• Thread Size: M10
• Colour Coding: brown
• Number of pins: 1
• Switch Pressure [bar]: 0.3
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with seal
• for OE number: 056919081C
• Manufacturer: DELLO AUTOMEGA

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Shifting Points [bar]: 0.3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: blue
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,15 - 0,35
• Manufacturer: TOPRAN
• Lisainfo: 100 345 HP
• Additional information: 100 345 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1981
• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: white
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 1,6 - 2,0
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Lisainfo: Sender for oil temperature
• Additional information: Sender for oil temperature

• Length [mm]: 46
• Thread Size: M10x1
• Spanner Size: 24
• Colour Coding: white
• Number of pins: 1
• Pressure [bar]: 1.8
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: blue
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Diameter [mm]: 3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,15 - 0,45
• Name: OLISURVELšLITUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 0.4
• Manufacturer: FAE

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 1.8
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 14
• Thread Size: M10x1
• for OE number: 027919501
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Observe technical data:
• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 1.6
• Length [mm]: 46
• Switch point to [bar]: 2
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: white
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 23 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: FAE
• Additional information: NRF32110
• Lisainfo: NRF32110

• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Pressure [bar]: 1.4
• Thread Size: M10 x 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Engine Code: YZ
• Pressure [bar]: 2
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Colour: blue
• Shifting Points [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: white
• Pressure [bar]: 1.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure [bar]: 0.25
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Thread Size: M 10x1
• Colour: brown
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 81-D-000 001
• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: white
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Combi Switch Function: Normally Closed Contact
• Colour: blue
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [bar]: 1.6
• Pressure to [bar]: 2
• Combi Switch Function: Normally Open Contact
• Colour: white
• Supplementary Article/Supplementary Info: with seal
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Number of pins: 1
• Plug Type: Blade Terminal
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Olisurvellitus
• Manufacturer: HEL

• Sensor Type: NTC Sensor
• Thread Size: M10 x 1
• Spanner Size: 13
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: YZ
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• Colour: black
• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Identification Number (VIN) from: 81-B-045001
• Transmission Type: Automatic Transmission
• Plug Type: Blade Terminal
• Thread Size: M 10 x 1,0 mm
• Number of pins: 2
• Temperature range from [°C]: 25
• Temperature range to [°C]: 17
• Colour Coding: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 10x1
• Housing Colour: white
• Pressure [bar]: 1.4
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: 81-D-000 001
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 81-D-000 001
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.