Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Manufacturer Restriction: BOSCH
- Voltage [V]: 12
- Thickness [mm]: 5.8
- Width [mm]: 18
- Height [mm]: 14.8
- Quality: STANDARD LINE
- New part without deposit:
-
Name: SSINIKUHARI,
STARTER - Manufacturer: AS
- Manufacturer Restriction: BOSCH
- Voltage [V]: 12
- Thickness [mm]: 6
- Width [mm]: 18
- Height [mm]: 14.8
- Quality: STANDARD LINE
- New part without deposit:
-
Name: SSINIKUHARI,
STARTER - Manufacturer: AS
-
Additional information: BSX157-
158 AS -
Lisainfo: BSX157-
158 AS
- Manufacturer Restriction: BOSCH
- Voltage [V]: 12
- Thickness [mm]: 6
- Width [mm]: 18
- Height [mm]: 14.5
- Quality: STANDARD LINE
- New part without deposit:
- Manufacturer: AUTOSTARTER
-
Vehicle Identification Number (VIN) to: 4D-
V- 020000 -
Housing Colour: black/
white - Number of pins: 8
- Control Type: Turn knob control
- Housing material: Plastic
-
Name: Ste-
/ stardilliti - Manufacturer: HAN
- Lisainfo: 103 768 HP
- Additional information: 103 768 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Article/Info 2: without button
-
Fabrication Number: EKS-
AU- 000 - Manufacturer: NTY
-
Name: NTY EKS-
AU- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) from: 4D-
X- 005 001, 4D- W- 000 001 -
Vehicle Identification Number (VIN) to: 4D-
X- 004 999 - Manufacturer: DELLO AUTOMEGA
- Number of pins: 8
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Name: CE 65SKV017
- Manufacturer: ESEN SKV
- Number of pins: 8
- Colour: white
- Manufacturer: JP GROUP
- Lisainfo: Ignition switch
- Additional information: Ignition switch
-
Vehicle Identification Number (VIN) from: 4D-
W- 000001 -
Housing Colour: black/
white - Number of pins: 8
- Control Type: Turn knob control
- Housing material: Plastic
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 4D-
X- 005001 - Number of pins: 8
-
Name: STE-
/ STARDILLITI - Manufacturer: MAX
- Number of connectors: 8
- Colour: white
- Material: Plastic
- Control Type: Turn knob control
- Weight [kg]: 0.02
-
Name: STE-
/ STARDILLITI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 8
- Colour: white
- Material: Plastic
- Control Type: Turn knob control
- Weight [kg]: 0.02
- Name: SW 30 91 8646
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer: MAGNETI MARELLI
- Name: MM CI50035
-
Vehicle Identification Number (VIN) from: 4D-
X- 005 001 - Number of pins: 8
-
Name: STE-
/ STARDILLITI - Manufacturer: MEY
- Number of pins: 8
- Manufacturer: ERA
- Length [mm]: 55
- Width [mm]: 52
- Control Type: Push control
- Weight [kg]: 0.044
- Number of connectors: 8
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
-
Vehicle Identification Number (VIN) to: 4D-
V- 020 000 - Number of pins: 8
- Colour: black
- Control Type: Turn knob control
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity per packing unit: 5
- Length [mm]: 37.9
- Width [mm]: 51.25
- Control Type: Turn knob control
- Weight [kg]: 0.044
- Number of connectors: 8
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Manufacturer Restriction: VAG,
Porsche - Number of pins: 8
- Cable Length [mm]: 200
- Cable cross-section from [mm²]: 1.5
- Cable cross-section to [mm²]: 2.5
-
Contact surface: Tin-
plated - Socket Width [mm]: 4.8
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
ste- / stardilliti - Manufacturer: HBE