Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 1
- Thread Size: M10x1 mm
- Spanner Size: 13 mm
- for OE number: 049919563B
- Manufacturer: KAMOKA
- Additional information: 4080049 KAMOKA
- Lisainfo: 4080049 KAMOKA
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: rectangular
-
Fabrication Number: ECP-
AU- 027 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fabrication Number: ECT-
AU- 008 - Number of pins: 4
- Manufacturer: NTY
- Colour Coding: blue
- Number of pins: 1
- Measuring Range to [°C]: 180
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
-
Transmission Type: 6-
Speed Manual Transmission - Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV555
- Manufacturer: ESEN SKV
- Quantity: 1
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: temperature sensor; green; 4 pins
- Manufacturer: VIKA
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
VLISTEMPERATUUR - Manufacturer: MAX
-
Lisainfo: 21-
0339 -
Additional information: 21-
0339
- Fitting Position: Front Axle
- Quantity: 1
- General Information: distance sensor
- Manufacturer: VIKA
- Operating voltage [V]: 12
- Sensor Type: Passive sensor
- Combi Switch Function: Reed Contact
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Lisainfo: Distance sensor
- Additional information: Distance sensor
- Number of wires (repair kit, cable set): 3
- Supplementary Article/Info 2: with a plug
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Cable Length [mm]: 745
-
Fabrication Number: ECP-
AU- 021 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Connecting thread: M10 x 1
- Manufacturer: ERA
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 4
- Socket colour: black
- for OE number: 059919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Number of connectors: 4
- Connector Shape: angular
- Thread Size: 20 mm
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2605 VERNET
- Lisainfo: WS2605 VERNET
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 4
- for OE number: 059919501A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Weight [g]: 15
- Name: IM 5309
- Manufacturer: ORIGINAL IMPERIUM
- Colour: grey
- Sensor Type: Passive sensor
- for OE number: 71957147
- Manufacturer: KAMOKA
- Engine Code: AKE
- Housing Colour: blue
- Temperature range to [°C]: 180
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: EPS
- Transmission Type: Manual Transmission
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
-
Name: ANDUR,
VAHEMAA - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of wires (repair kit, cable set): 3
- Supplementary Article/Info 2: with a plug
- Number of pins: 3
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Transmission Type: Manual Transmission
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
-
Name: ANDUR,
VAHEMAA - Manufacturer: MAX
-
Lisainfo: 012409191D/
MG -
Additional information: 012409191D/
MG
- Housing Colour: dark green
- Number of pins: 4
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10279
- Engine Code: AKE
- Number of pins: 2
- Fitting Depth [mm]: 79
- Manufacturer: ERA
- Voltage [V]: 12
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV345
- Manufacturer: ESEN SKV
-
Fitting Position: both sides,
Front, Rear, outer -
Fabrication Number: EPDC-
AU- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AKE
- Thread Size: M 10x1
- Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
- Connector Shape: D Shape
- Socket colour: green
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 059 919 501 A
- Manufacturer: MEAT & DORIA
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 4
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: not have
- Name: NI 207090
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Vehicle Identification Number (VIN) from: 4D-
X- 005 001 - Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Number of pins: 4
- Housing Colour: green
- Fitted Diameter [mm]: 20
- Connector Shape: round
- Manufacturer: FAE
Manufacturer: MAGNETI MARELLI
- Number of pins: 4
- Socket colour: black
- Manufacturer: ERA
- Number of pins: 2
- Connector Shape: rectangular
- Socket colour: black
- Thread Size: M10x1 mm
- Sensor Type: NTC Sensor
- Spanner Size: 19
- for OE number: 059 919 563
- Manufacturer: MEAT&DORIA
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Colour Coding: green
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA109
- Number of pins: 4
- Manufacturer: ERA
- Housing Colour: black
- Number of pins: 2
-
Name: ANDUR,
VLISTEMPERATUUR - Manufacturer: DLP
- Lisainfo: TS10266
- Additional information: TS10266
- Thread Size: 20
- Number of pins: 4
- Manufacturer: ERA
- Voltage [V]: 12
- Length [mm]: 730
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV265
-
Fitting Position: Rear,
both sides, Front, inner, outer - Sensor Type: Ultrasonic Sensor
-
Fabrication Number: EPDC-
AU- 014 - Manufacturer: NTY
-
Name: NTY EPDC-
AU- 014
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Engine Code: AKE
- Colour: blue
- Corresponds to the original part in colour: blue
- Manufacturer: FACET
-
Fitting Position: Front,
both sides, Rear - Socket colour: black
-
Fabrication Number: EPDC-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AKE
- Colour: blue
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Fitting Position: Front,
Rear - Manufacturer: YSPARTS
- Engine Code: AKE
- Housing Colour: black
- Temperature range to [°C]: 170
- Thread Size: M10x1
- Spanner Size: 19
- Manufacturer: FACET
- Engine Code: AKE
- Housing Colour: black
- Temperature range to [°C]: 170
- Thread Size: M10x1
- Spanner Size: 19
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: EPS
- Fitting Position: Front
- Sensor Type: Ultrasonic Sensor
- Colour: white
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Weight [kg]: 0.017,
0.027 - Supplementary Article/Supplementary Info: with seal
- for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Number of connectors: 2
- Manufacturer: JPN
- Cable Length [mm]: 745
- Number of connectors: 3
- Housing Colour: grey
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
- Thread Size: M10 x 1
- Number of pins: 2
- Manufacturer: ERA
- Temperature range to [°C]: 170
- External Thread Size: M10 x 1
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 1
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
-
Colour: grey,
black - Manufacturer: DELLO AUTOMEGA
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- Temperature range to [°C]: 170
- External Thread Size: M10 x 1
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 92 8334
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Plugged
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
- Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
blue - Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107541
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Fitting Position: Front,
Rear - Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front,
Rear - Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Chemical Properties: Paintable
- for OE number: 4B0919275
- Manufacturer: DELLO AUTOMEGA
- Colour: grey
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Voltage [V]: 12
-
Name: Andur,
vntvoll - Manufacturer: MAX
-
Fitting Position: Front,
Rear - Manufacturer: YSPARTS
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 4
- Socket colour: black
- for OE number: 058919501A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Fitting Position: Left,
Right - Colour: black
- Manufacturer: MAGNETI MARELLI
- Name: MM SDP104
- Additional information: 021016104010
- Lisainfo: 021016104010
Manufacturer: MAGNETI MARELLI
-
Fitting Position: Front,
Rear - Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV031
- Lisainfo: 28SKV031 SKV
- Additional information: 28SKV031 SKV
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 4
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: not have
- Name: NI 207061
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Housing Type: Aluminium Housing
- Height [mm]: 82
- Supplementary Article/Supplementary Info: with seal
- Fitting Depth [mm]: 54
-
Fabrication Number: EPO-
AU- 000 - Manufacturer: NTY
-
Name: NTY EPO-
AU- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front,
Rear - Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV030
- Number of pins: 3
- Connector Shape: D Shape
- Cable Length [mm]: 745
- Sensor Type: Inductive Sensor
- Manufacturer: MEAT&DORIA
- Number of pins: 4
- Housing Colour: black
- Fitted Diameter [mm]: 20
- for OE number: 058 919 501 A
- Manufacturer: FAE
- Thread Size: 20 mm
- Manufacturer: VERNET
-
Fitting Position: both sides,
Rear, Front - Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Colour: black
- Shape: angled
-
Chemical Properties: Over-
paintable - Name: Parking sensor
- Quality class: PJ
Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)
- Quantity: 1
- General Information: interior temperature sensor
- Manufacturer: BORSEHUNG
- Number of connectors: 4
- Diameter [mm]: 25
- Length [mm]: 50
-
Weight [kg]: 0.02,
0.2 - Supplementary Article/Supplementary Info: with seal
- for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: 4D-
X- 005500 -
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Type: Passive sensor
-
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Number of pins: 4
- Colour Coding: white
- Weight [kg]: 0.032
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: Alfa Romeo,
Fiat, VAG - Number of pins: 2
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Number of pins: 4
- Plug Type: Female
- Number of circuits: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 250
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 0.5
- Manufacturer: 3RG
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Socket colour: grey
-
Name: CZUJNIK POO½ENIA WAU KORB. VW PASSAT 97-
- Manufacturer: BRM
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 4
- Mounting Type: Pressed
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 4B0 919 275 A
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: MAX
-
Lisainfo: 27-
1285 -
Additional information: 27-
1285
- Cable Length [mm]: 710
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV202
- Manufacturer: ESEN SKV
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: BMW,
Volvo, VAG - Number of pins: 3
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul
-
Fitting Position: Rear,
Front - for PR number: 7X1
- Block Separation:
-
Vehicle Identification Number (VIN) from: 4D-
X- 005001 - Colour Code: GRU
- Colour: black
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
- Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cable Length [mm]: 720
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 24
- Alternative Repair Kit: 550671
- Manufacturer: ERA
- Engine Code: AKE
-
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Length [mm]: 37
- Manufacturer: FACET
-
Vehicle Identification Number (VIN) to: 4D-
X- 005500 -
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with cable
- Supplementary Article/Supplementary Info: with bush
- Length [mm]: 896
- Braking/Drive Dynamics: for vehicles with ABS
- Manufacturer: TOPRAN
- Lisainfo: 115 600 HP
- Additional information: 115 600 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AKE
-
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Length [mm]: 37
- Name: EP 1.960.014
- Manufacturer: EPS
- Number of pins: 3
- Manufacturer: YSPARTS
-
Fitting Position: Front Axle Left,
Front Axle Right - Block Separation:
- Number of connectors: 2
- Weight [kg]: 0.05
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AKE
- Colour: black
- Temperature range [°C]: 120
- Fitting Depth [mm]: 20
- Manufacturer: FACET
- Fitting Position: both sides
- for OE number: 4B0 919 275 A GRU
- Chemical Properties: Paintable
- Width 1 [mm]: 49
- Height 1 [mm]: 36
- Length 1 [mm]: 75
- Weight [g]: 31
- Guarantee: 3 years guarantee
- Number of pins: 3
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: AKE
- Colour: black
- Temperature range [°C]: 120
- Fitting Depth [mm]: 20
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
Manufacturer: DELLO AUTOMEGA
- Length [mm]: 660
- Number of connectors: 3
- Weight [kg]: 0.072
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- for OE number: 058919501A
- Resistor [Ohm]: 900
- Length [mm]: 750
-
Cable Length [mm]: 745,
660 -
Sensor Type: Inductive Sensor,
Passive sensor - Required quantity: 1
-
Supplementary Article/Info 2: for crankshaft,
with cable - Number of connectors: 3
- Operating Mode: Electric
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Connector Shape: D Shape
- Colour Coding: grey
- Number of mounting bores: 1
- Corresponds to the original part in colour: grey
- Weight [kg]: 0.127
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Block Separation:
- Number of connectors: 2
- Weight [kg]: 0.05
- Name: SW 30 10 1054
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 6-
Speed Manual Transmission -
Vehicle Identification Number (VIN) from: 4D-
X- 005 001 - Number of pins: 2
- Weight [kg]: 0.02
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Connector Shape: D Shape
- Number of mounting bores: 3
- Height [mm]: 83
- Fitting Depth [mm]: 52
- for OE number: 1J0 907 660 B
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
- Engine Code: AKE
- Cable Length [mm]: 750
- Manufacturer: FAE
- for OE number: 4B0 919 275 A
-
Fitting Position: Rear,
Front -
Name: SENSOR,
PARKIMISABI - Manufacturer: TRU
- for article number: 012 409 191 D
- Width 1 [mm]: 72
- Height 1 [mm]: 30
- Length 1 [mm]: 111
- Weight [g]: 28
- Guarantee: 3 years guarantee
- Number of pins: 2
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: AKE
- Colour: grey
- Length [mm]: 745
- Manufacturer: FACET
- Number of mounting bores: 1
- Voltage [V]: 12
- Resistor [Ohm]: 900
- Tolerance [%]: 10
- Cable Length [mm]: 745
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU009146391
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Length [mm]: 660
- Number of connectors: 3
- Weight [kg]: 0.072
- Supplementary Article/Info 2: with seal ring
- Name: SW 32 92 4446
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AKE
- Colour: grey
- Length [mm]: 745
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 900
-
Name: ANDUR,
VNTVOLL - Manufacturer: VAL
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Number of mounting bores: 3
- Manufacturer: ERA
Cable Repair Kit,
METZGER
- Number of pins: 4
- Plug Type: Female
- Number of circuits: 4
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 250
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 0.5
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER
- Cable Length [mm]: 460
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE AS10186
- Number of connectors: 3
- Cable Length [mm]: 570
- Weight [kg]: 0.068
- Name: SW 33 10 3001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AKE
- Housing Colour: blue
- Length [mm]: 570
- Manufacturer: EPS
- Weight [kg]: 0.072
- Colour: grey
- Required quantity: 1
- General Information: crankshaft pulse sensor
- Manufacturer: BORSEHUNG
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS
- for article number: 054 905 377 G
- Width 1 [mm]: 91
- Height 1 [mm]: 37
- Length 1 [mm]: 834
- Weight [g]: 75
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- General Information: schrader TPMS sensor
- Manufacturer: VIKA
- Required quantity: 8
-
Fitting Position: both sides,
Front, Rear - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: angled
- Shaft form: oval
- Assy./disassy. by qualified personnel required!:
-
Name: Sensor,
parkimisabi - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Colour: black
- Number of pins: 3
- Connector Shape: D Shape
- for OE number: 4B0 919 275
- Manufacturer: MEAT&DORIA
- Quantity: 8
-
Fitting Position: both sides,
Front, Rear - Colour: black
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
-
Chemical Properties: Over-
paintable - See accessories list for additionally required parts:
-
Article number of recommended accessories: V99-
72- 0002 - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: Piezoelectric Sensor
- Cable Length [mm]: 540
- Number of pins: 3
- Name: Detonatsiooniandur
- Manufacturer: MEY
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 4
- Fitting Position: Front Axle
- Length [mm]: 830
- Number of pins: 2
- Plug Type: Female
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.15
- Operating Mode: Electric
- Socket colour: black
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV331
- Check OE number:
- Sensor Type: Inductive Sensor
-
Supplementary Article/Info 2: with seal ring,
with protection hose - Cable Length [mm]: 711
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 45
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Colour: grey
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV100
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 885
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.19
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV599
- Manufacturer: ESEN SKV
- Weight [kg]: 0.05
-
Test Mark: CE,
FCC, IC - Colour: Orange
-
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system - Frequency Range [MHz]: 433
- Valve colour: silver
- Mounting Type: Bolted
- Installation Information: TPMS sensor needs to be programmed before use.
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HUF
- Additional information: UVS4050
- Lisainfo: UVS4050
- Weight [kg]: 0.05
-
Test Mark: CE,
FCC, IC - Colour: Orange
-
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system - Frequency Range [MHz]: 433
- Valve colour: black
- Mounting Type: Bolted
- Installation Information: TPMS sensor needs to be programmed before use.
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HUF
- Colour Coding: grey
- Guarantee: 5 years guarantee
- Manufacturer: HITACHI
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 250
- Manufacturer: FAE
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 630
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.16
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV616
- Manufacturer: ESEN SKV
- Quantity: 2
- Lambda Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Number of pins: 4
-
Overall Length [mm]: 1,
700 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
- Number of pins: 5
- Suction pipe connector diameter [mm]: 80
- Quality class: PJ
- Name: Air flow sensor
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
Left, Right - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 620
- Manufacturer: DELPHI
-
Name: DE ES20160-
12B1
- Alternatively:
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Weight [kg]: 0.1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Engine Code: AKE
- for OE number: 059906461M
- Number of pins: 5
- Manufacturer: MEAT&DORIA
- Number of pins: 5
- Housing Type: with housing
- Lisainfo: Air Mass Sensor
- Additional information: Air Mass Sensor
- Block Separation:
-
Cable Length [mm]: 1,
690 - Manufacturer: DELPHI
-
Name: DE ES20164-
12B1
Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, Left, Right, Front, after catalytic converter
-
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS
- Engine Code: AKE
- Manufacturer Restriction: HELLA
- Sensor Length [mm]: 63.7
- Manufacturer: FACET
- Quantity: 2
- Lambda Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Number of pins: 4
-
Overall Length [mm]: 1,
700 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
-
Fitting Position: Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Thread pre- greased -
Line insulation design: with silicone-
coated woven- fibre insulation -
Cable Length [mm]: 1,
500 - Number of circuits: 4
- Weight [kg]: 0.219
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AKE
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- Used part return not required:
- Weight [kg]: 0.48
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV145
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
MOOTORIOLITASE - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AKE
- Manufacturer Restriction: HELLA
- Sensor Length [mm]: 63.7
- Manufacturer: EPS
- Engine Code: AKE
- for article number: 86359E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
700 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Quantity: 1
- Operating Mode: Electric
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- General Information: air mass meter
- Manufacturer: VIKA
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
-
Housing Colour: black/
silver - Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10499-
12B1
- Mounting Type: Bolted
- Number of pins: 5
- Suction pipe connector diameter [mm]: 80
- Assy./disassy. by qualified personnel required!:
- Name: HE 8ET009142451
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AKE
- for OE number: 03L906461
- Manufacturer: MEAT&DORIA
- Engine Code: AKE
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HUCO
- Name: HI 2505055