• Engine Code: AWT, ANB
• Construction Year from: 06.2000, 05.1999
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Construction Year to: 07.1999
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: APU
• Construction Year to: 01.1999
• Exhaust System: for pre-catalytic converter
• for OE number: 021906265AG
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,330
• Number of pins: 4
• Weight [g]: 146
• Gross Weight [g]: 176
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Engine Code: ANB
• Construction Year from: 05.1999
• Exhaust System: for pre-catalytic converter
• for OE number: 023906262
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,250
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: AEB
• Construction Year from: 07.1996
• Construction Year to: 07.1997
• Vehicle Identification Number (VIN) from: 8D-V 000 001
• Vehicle Identification Number (VIN) to: 8D-V 400 000
• Number of pins: 4
• Overall Length [mm]: 1,170
• Lambda Sensor: Regulating Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: AEB, APU
• Construction Year from: 07.1996, 08.1998, 08.1997
• Construction Year to: 07.1997, 12.1998
• Block Separation:
• Lambda Sensor: Regulating Probe, Finger probe
• Vehicle Identification Number (VIN) to: 8D-X199999
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Engine Code: AEB
• Construction Year to: 07.1998
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720.1
• Number of circuits: 4
• Weight [kg]: 0.182
• Manufacturer: VEMO

Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AEB
• Vehicle Identification Number (VIN) from: 8D-V-000001
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: ANB, AWT
• Construction Year from: 05.1999, 06.2000
• Construction Year to: 07.1999
• Lambda Sensor: Diagnostic Probe, Heated
• Block Separation:
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: APU, ARK, AEB
• Block Separation:
• Construction Year from: 08.1997
• Vehicle Identification Number (VIN) from: 8DW000001
• Cable Length [mm]: 740
• Manufacturer: DELPHI

Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe, Heated Fitting Position: after catalytic converter, before catalytic converter

• Engine Code: ANB, AWT
• Construction Year from: 01.1999, 05.1999, 06.2000
• Construction Year to: 07.1999
• Vehicle Identification Number (VIN) to: 8D-T300000
• Vehicle Identification Number (VIN) from: 8D..X..200001
• Block Separation:
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Construction Year from: 08.1997
• Engine Code: AEB, APU, ARK
• Voltage [V]: 12
• Length [mm]: 1,440
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV079

• Engine Code: APU
• Construction Year to: 01.1999
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: AEB
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 07.1996
• Construction Year to: 07.1997
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) from: 8D-V-000 001
• Engine Code: AEB
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Fitting Position: Front, after catalytic converter
• Engine Code: ANB/AWT
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,175
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV038
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Engine Code: ANB, AWT
• Alternatively:
• Cable Length [mm]: 2
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Engine Code: ARK
• Construction Year from: 08.1998
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 06.2000
• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: AWT
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 760
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 800
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 4
• Weight [kg]: 0.21
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV624
• Manufacturer: ESEN SKV

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) to: V-400 000
• Cable Length [mm]: 954
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI

• Engine Code: ANB, APU, ARK
• Fitting Position: Front
• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,250
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year from: 01.1999
• Engine Code: ANB, APU
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AEB, APU
• Construction Year to: 07.1998, 12.1998
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Construction Year from: 08.1998
• Vehicle Identification Number (VIN) to: 8D-X 199 999
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: after catalytic converter, before catalytic converter

• Engine Code: ANB, AWT, APU, ARK
• Block Separation:
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Lambda Sensor: Diagnostic Probe, Regulating Probe, Planar probe, Heated Fitting Position: after catalytic converter, before catalytic converter Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Engine Code: AEB
• Construction Year to: 06.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 8D-T 300 000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 05.1999
• Engine Code: ANB
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Weight [kg]: 0.138
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANB
• Construction Year from: 05.1999
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: ANB, APU
• Construction Year from: 01.1999
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,200
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AWT, ANB
• Construction Year from: 05.1999
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 720
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: ANB, AWT
• Construction Year from: 05.1999
• Construction Year to: 07.1999
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe, Heated
• Block Separation:
• Model Year from: 2000
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AEB
• Construction Year to: 07.1997
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,200
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: AWT, ANB
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) to: V-400 000
• Cable Length [mm]: 2
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Engine Code: ANB
• Construction Year from: 05.1999
• for OE number: 06C906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Construction Year to: 07.1998
• Engine Code: AEB
• Lambda Sensor: Heated
• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 860
• for article number: 81546
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Engine Code: ANB, AWT
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AEB
• Construction Year to: 07.1998
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: AEB
• Construction Year to: 07.1996
• Vehicle Identification Number (VIN) to: T-400000
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,500
• Number of circuits: 4
• Weight [kg]: 0.219
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Overall Length [mm]: 750
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Engine Code: AEB
• Vehicle Identification Number (VIN) to: T-400 000
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 58906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,690
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Name: DN DOX-2035
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Engine Code: AEB
• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,370
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: AEB
• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,290
• Connector Shape: D Shape
• Socket colour: black
• for OE number: 021 906 265 AA
• Weight [kg]: 0.214
• Thread Size: M18 x 1,5
• Length [mm]: 1,400
• Number of pins: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANB, AWT
• Construction Year from: 05.1999, 06.2000
• Construction Year to: 07.1999
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Block Separation:
• Number of circuits: 8
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 01.1999
• Engine Code: ANB,APU,AWT
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 368003

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Heated
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• Overall Length [mm]: 1,760
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: AWT
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AEB
• Construction Year from: 07.1996
• Construction Year to: 07.1997
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 8D-V 000 001
• Vehicle Identification Number (VIN) to: 8D-V 400 000
• Number of circuits: 4
• Overall Length [mm]: 1,170
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH