• Fitting Position: Crankcase
• Fabrication Number: GPP-VW-005
• Manufacturer: NTY
• Name: NTY GPP-VW-005

Fabrication Number: GPP-VW-054

• Material: Plastic
• Valve type: Breather Valve
• for OE number: 035 103 245A
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: MAX

• Valve type: Breather Valve
• for OE number: 035 103 245A
• Material: Plastic
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Material: Plastic

• Shape: T Shape (T Piece)
• Material: AEM (Ethylene Acrylate Rubber)
• Hose Type: Moulded Hose
• Number of inlets/outlets: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: GPP-VW-057
• Manufacturer: NTY

• Fitting Position: Crankcase
• Valve type: Breather Valve, Diaphragm Valve

• Fabrication Number: GPP-VW-123
• Manufacturer: NTY

• Engine Code: ANB
• Manufacturer: ZZVF

• Engine Code: AEB, ANB, APU, AWT
• Fitting Position: Crankcase
• Valve type: Breather Valve, Diaphragm Valve
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 06A 129 101 D
• Fitting Position: Cylinder Head
• Length [mm]: 80
• Width [mm]: 64
• Height [mm]: 54
• Operating Mode: Pressure Controlled
• Valve type: Breather Valve, Diaphragm Valve
• Observe service information:
• Housing material: Polyamid 6.6
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Fabrication Number: EPCV-VW-004
• Name: NTY EPCV-VW-004
• Manufacturer: NTY

• General Information: pressure regulating valve
• Manufacturer: VIKA

• Material: AEM (Ethylene Acrylate Rubber)
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Engine Code: ANB, AWT
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV544

• Thickness [mm]: 5
• Width [mm]: 65
• Length [mm]: 110
• Name: Tihend,olifilter
• Manufacturer: AJU

• Engine Code: APU, ANB, AEB
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: ANB, AEB, AWT, APU
• Weight [kg]: 0.007
• Operating Mode: Pressure Controlled
• Observe technical data:
• Observe service information:
• Width [mm]: 24
• Height [mm]: 24
• Recommended change interval [years]: 3
• Fitting Position: engine sided
• Length [mm]: 24
• Valve type: Breather Valve
• Recommended change interval [km]: 60,000
• Observe the vehicle manufacturer specifications:
• Housing material: Polyamid 6.6
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANB
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 06B 103 221 P
• Fabrication Number: GPP-VW-056
• Manufacturer: NTY

• Quantity Unit: Kit
• Number of Parts [parts]: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: AWT
• Fitting Position: Upper
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Fitting Position: Cylinder Head
• Operating Mode: Pressure Controlled
• Valve type: Breather Valve, Diaphragm Valve

• for OE number: 06A 103 213
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• for OE number: 058103493A
• Weight [g]: 38
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 20
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Shape: T Shape (T Piece)
• for OE number: 06A 103 247
• Manufacturer: METZGER

• Length [mm]: 80
• Width [mm]: 64
• Manufacturer: 3RG

• Engine Code: AWT
• Fitting Position: Upper
• Manufacturer: JP GROUP
• Lisainfo: Breather tube for cylinder head
• Additional information: Breather tube for cylinder head

• for OE number: 06A129101D
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 45
• Name: IM 4802
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: AWT
• Weight [kg]: 0.065
• Manufacturer: 3RG

• Material: Plastic
• Valve type: Breather Valve
• for OE number: 06A 129 101D
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.04
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2001
• Material: NBR (nitrile butadiene rubber)
• Colour: black
• Hose Length [mm]: 47
• Inner Diameter 1 [mm]: 19.5
• Inner Diameter 2 [mm]: 22
• Name: Voolik,Karterituulutus
• Manufacturer: GAT

• for OE number: 06A 103 213 F
• Fabrication Number: GPP-AU-001
• Manufacturer: NTY

• Engine Code: ANB, AWT
• Vehicle Identification Number (VIN) from: 8D-X-200001
• Block Separation:
• Weight [kg]: 0.04
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 06A103247
• Weight [g]: 49
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 22
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Engine Code: ANB
• for OE number: 058 103 493 A
• Manufacturer: METZGER

• Engine Code: AWT
• Weight [kg]: 0.077
• Manufacturer: METALCAUCHO

• Engine Code: ARK, ANB, APU, AEB
• Name: USZCZELNIACZ ODMY VW GOLF 2.0 94-
• Manufacturer: DRM

• for OE number: 06B 103 221 P
• Weight [kg]: 0.085
• Fitting Position: Crankcase
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2001
• Engine Code: AWT
• Material: Plastic
• Colour: black
• Hose Length [mm]: 180
• Inner Diameter 1 [mm]: 28.5
• Inner Diameter 2 [mm]: 15.5
• Name: Voolik,Karterituulutus
• Manufacturer: GAT

Air Supply Hoses/Pipes: from cylinder head cover to valve (crankcase ventilation)

• Engine Code: AEB, ANB, APU
• Valve type: Non-Return Valve
• Material: Plastic
• Manufacturer: DELLO AUTOMEGA

• Required quantity: 1
• Weight [g]: 73
• Length [mm]: 139
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 16
• Name: IM 221963
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle type: AWT
• Material: Plastic
• Valve type: Breather Valve
• for OE number: 06A 129 101D
• Manufacturer: ENERGY

• Engine Code: AWT
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Manufacturer: METZGER

• Weight [kg]: 0.041
• Fitting Position: Crankcase
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANB
• Fitting Position: Cylinder Head
• for OE number: 06A 129 101 D
• Operating Mode: Pressure Controlled
• Height [mm]: 54
• Observe the vehicle manufacturer specifications:
• Valve type: Breather Valve, Diaphragm Valve
• Length [mm]: 80
• Width [mm]: 64
• Observe service information:
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: MAX

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Upper
• Material: Plastic
• Inner Diameter 1 [mm]: 28.5
• Inner Diameter 2 [mm]: 15.5
• Weight [kg]: 0.06
• Colour: black
• Warranty: 3 years warranty
• Hose Length [mm]: 180
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV461

• General Information: connecting pipe
• Manufacturer: BORSEHUNG

• Engine Code: AWT
• Fitting Position: Cylinder Head
• Operating Mode: Pressure Controlled
• Valve type: Breather Valve
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.07
• Name: CE 31SKV010
• Manufacturer: ESEN SKV

• for OE number: 6A103213
• Weight [g]: 90
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Engine Code: ANB, AEB, AWT, APU
• Colour: black
• Weight [kg]: 0.03
• for OE number: 035 103 245 A
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.085
• Packaging length [cm]: 14.5
• Packaging width [cm]: 10
• Packaging height [cm]: 8.3
• Manufacturer: FEBEST

• Engine Code: AWT
• Fitting Position: Upper
• Weight [kg]: 0.065
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

for OE number: 58103213

• Engine Code: AWT
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• Inner Diameter 1 [mm]: 28.5
• Inner Diameter 2 [mm]: 14.5
• Weight [kg]: 0.08
• Colour: black
• Warranty: 3 years warranty
• Hose Length [mm]: 285
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV463
• Manufacturer: ESEN SKV

• Engine Code: AWT
• Fitting Position: Upper
• Weight [kg]: 0.065
• Manufacturer: SWAG
• Name: SW 30 93 6274

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06A129101A/D
• Manufacturer: METZGER

• Model Year from: 1999
• Operating Mode: Pneumatic
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.11
• Manufacturer: SKV GERMANY
• Name: CE 31SKV014

• Engine Code: AWT
• for OE number: 06A 103 213
• Weight [kg]: 0.07
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AWT
• for OE number: 06A 103 213 F
• Fitting Position: Crankcase
• Weight [kg]: 0.076
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year from: 1999
• Weight [kg]: 0.13
• Operating Mode: Pneumatic
• Manufacturer: METALCAUCHO

• Weight [kg]: 0.064
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Pneumatic
• General Information: pressure regulating valve
• Manufacturer: VIKA

• Engine Code: ANB, AWT
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• Length [cm]: 46
• Width [cm]: 44
• Height [cm]: 12
• Weight [kg]: 0.18
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV465

• Fitting Position: Lower
• Engine Code: ANB/AWT
• Weight [kg]: 0.18
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: breather line
• Manufacturer: BORSEHUNG

• for OE number: 058133817H, 58133817H
• Weight [g]: 136
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Engine Code: ANB
• for OE number: 06A 129 101 D
• Operating Mode: Pressure Controlled
• Height [mm]: 54
• Valve type: Breather Valve, Diaphragm Valve
• Fitting Position: Cylinder Head
• Length [mm]: 80
• Width [mm]: 64
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Name: klapp, karterituulutus
• Manufacturer: MAX

• Engine Code: AEB, ANB, APU, AWT
• Block Separation:
• Shape: L Shape
• for OE number: 058 103 213
• Manufacturer: METZGER

• Weight [kg]: 0.173
• for OE number: 06B 103 213 G
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year from: 1999
• Operating Mode: Pneumatic-hydraulic
• Weight [kg]: 0.136
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.