Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Thickness [mm]: 5
- Inner Diameter [mm]: 59
- Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Thickness [mm]: 2.5
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 18
- Weight [kg]: 0.001
-
Name: RONGASTIHEND,
OLIRADIAATOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 59
- Outer Diameter [mm]: 69
- Thickness [mm]: 5
-
Shape: O-
Ring - Observe system fill quantity:
- Manufacturer: TOPRAN
- Lisainfo: 104 526 HP
- Additional information: 104 526 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 59
- Outer Diameter [mm]: 69
- Thickness [mm]: 5
- Shape: O Shape
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 5
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 70
- DIN/ISO: 7603
- Material: Rubber
-
Name: RONGASTIHEND,
OLIRADIAATOR - Manufacturer: MAX
- Quantity per packing unit: 10
- Inner Diameter [mm]: 59
- Thickness [mm]: 5
-
Material: AEM
(Ethylene Acrylate Rubber) - Manufacturer: ELRING
- Lisainfo: 634.380 ELR
- Additional information: 634.380 ELR
- Thickness [mm]: 2.5
- Width [mm]: 50
- Length [mm]: 70
-
Name: Rongastihend,
oliradiaator - Manufacturer: AJU
- Thickness [mm]: 5
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 70
- DIN/ISO: 7603
- Material: Rubber
- Weight [kg]: 0.002
-
Name: RONGASTIHEND,
OLIRADIAATOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: G0L
- Weight [kg]: 0.01
- Quantity: 10
- Packaging length [cm]: 10
- Packaging width [cm]: 10
- Packaging height [cm]: 2
- Manufacturer: FEBEST
- Material: Aluminium
-
Cooling Type: Water-
cooled - Core Length [mm]: 87
- Core Width [mm]: 95
- Core Depth [mm]: 60
-
Fabrication Number: CCL-
AU- 007 - Manufacturer: NTY
-
Name: NTY CCL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 54
- Core Width [mm]: 100
- Core Length [mm]: 91
- for OE number: 68117021
- Manufacturer: KAMOKA
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 60
- Core Width [mm]: 95
- Core Length [mm]: 87
- Manufacturer: KAMOKA
-
Cooling Type: Water-
cooled - Core Width [mm]: 99
- Core Depth [mm]: 92
- Number of ribs: 5
- Core Length [mm]: 56
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: MAX
-
Lisainfo: 068117021BDE-
10 -
Additional information: 068117021BDE-
10
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 56
- Core Width [mm]: 92
- Core Length [mm]: 92
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BGA
-
Cooling Type: Water-
cooled - Core Depth [mm]: 56
- Core Width [mm]: 99
- Core Length [mm]: 92
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BGA
-
Cooling Type: Water-
cooled - Core Depth [mm]: 57
- Core Length [mm]: 132
- Core Width [mm]: 95
- Material: Aluminium
- Supplementary Article/Supplementary Info: without oil filter housing
-
Cooling Type: Water-
cooled - Core Depth [mm]: 56
- Core Width [mm]: 99
- Core Length [mm]: 92
- Number of ribs: 5
- Supplementary Article/Info 2: with seal ring
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: NRF
- Lisainfo: 92*92*56
- Additional information: 92*92*56
- Name: Oil cooler
- Quality class: PJ
Lisainfo: 100 90- (kvaliteediklass PJ)
-
for OE number: 028117021K/
B/ L - Length [mm]: 100
- Width [mm]: 92
- Height [mm]: 20
- Manufacturer: DELLO AUTOMEGA
- Core Depth [mm]: 60
- Core Width [mm]: 95
- Core Length [mm]: 87
- Manufacturer: JP GROUP
- Lisainfo: Oil cooler
- Additional information: Oil cooler
- Supplementary Article/Info 2: with seal ring
-
Cooling Type: Water-
cooled - Material: Aluminium
- Width [mm]: 92
- Core Length [mm]: 92
- Core Depth [mm]: 56
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: MAX
-
Cooling Type: Water-
cooled - Core Depth [mm]: 61
- Core Length [mm]: 129
- Core Width [mm]: 93
- Material: Aluminium
- Supplementary Article/Supplementary Info: without oil filter housing
- Transmission Type: Manual Transmission
- Core Length [mm]: 90
- Core Width [mm]: 90
- Core Depth [mm]: 54
- Packaging length [cm]: 31.5
- Packaging width [cm]: 19.5
- Packaging height [cm]: 8.5
- Weight [kg]: 0.52
- Manufacturer: AKSDASIS
- Name: Oil cooler
- Quality class: PJ
Lisainfo: SEBRING 07- (kvaliteediklass PJ)
- Guarantee: 3 years guarantee
- Weight [kg]: 0.53
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Weight [kg]: 0.386
- Supplementary Article/Supplementary Info: with seal
-
Cooling Type: Water-
cooled - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 211007
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 56
- Core Width [mm]: 92
- Core Length [mm]: 92
- Supplementary Article/Info 2: with seal ring
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: NRF
- Lisainfo: 92*92*56
- Additional information: 92*92*56
-
Cooling Type: Water-
cooled - Core Depth [mm]: 57
- Core Length [mm]: 132
- Core Width [mm]: 95
- Material: Aluminium
- Number of ribs: 6
- Outlet Ø [mm]: 12
-
Supplementary Article/Supplementary Info: without oil filter housing,
without gaskets/ seals - Supplementary Article/Info 2: without filter
-
Technical Information: FIRST FIT -
Includes gaskets and bolts when needed - Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN GOLF CABRIOLET
(1E7) (94- ) 1.9 TDi -
Additional information: VOLKSWAGEN GOLF CABRIOLET
(1E7) (94- ) 1.9 TDi
- Weight [kg]: 0.5
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BFB
- Length [mm]: 130
- Width [mm]: 92
- Height [mm]: 61
- Number of blades/vanes: 9
-
Name: Oliradiaator,
mootorioli - Manufacturer: PIE
- for OE number: 028117021L
-
Name: Oliradiaator,
mootorioli - Manufacturer: MD
-
Cooling Type: Water-
cooled - Core Depth [mm]: 61
- Core Length [mm]: 129
- Core Width [mm]: 93
- Material: Aluminium
- Number of ribs: 9
- Outlet Ø [mm]: 15
-
Supplementary Article/Supplementary Info: without oil filter housing,
without gaskets/ seals - Supplementary Article/Info 2: without filter
-
Technical Information: FIRST FIT -
Includes gaskets and bolts when needed - Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN MULTIVAN
(7H, 7E) (03- ) 2.0 i -
Additional information: VOLKSWAGEN MULTIVAN
(7H, 7E) (03- ) 2.0 i
- Core Depth [mm]: 55
- Core Length [mm]: 99
- Core Width [mm]: 92
- Material: Aluminium
-
Name: Oliradiaator,
mootorioli - Manufacturer: MAG
- for OE number: 028 117 021 B
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Length [mm]: 90
- Core Width [mm]: 90
- Core Depth [mm]: 54
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Core Depth [mm]: 61
- Core Length [mm]: 93
- Core Width [mm]: 95
- Material: Aluminium
-
Name: Oliradiaator,
mootorioli - Manufacturer: MAG
- Weight [kg]: 0.426
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 426
- Manufacturer: METALCAUCHO
- Core Length [mm]: 94
- Core Width [mm]: 92
- Core Depth [mm]: 55
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: with seal ring
- Packaging width [cm]: 10
- Packaging length [cm]: 14
- Net Weight [g]: 367
- Packaging height [cm]: 9
-
Name: Oliradiaator,
mootorioli - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 92
- Core Width [mm]: 92
- Core Depth [mm]: 61
- Radiator type: Brazed cooling fins
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging width [cm]: 10
- Packaging length [cm]: 14.1
- Net Weight [g]: 442
- Packaging height [cm]: 8.7
- Name: MH CLC163000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.