Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Intake Side
- Operating Mode: Hydraulic
- Valve type: for inlet valves
- Lisainfo: PAKENDIS 8 tk
- Additional information: PAKENDIS 8 tk
- Thickness [mm]: 5
- Outer Diameter [mm]: 8.4
- Valve Stem Diameter [mm]: 6
- Notches/Holes Number: 3
- Weight [kg]: 0.002
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Intake Side
- Operating Mode: Hydraulic
- Outer Diameter [mm]: 24
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Exhaust Side
- Operating Mode: Hydraulic
- Valve type: for exhaust valves
- Lisainfo: PAKENDIS 8 tk
- Additional information: PAKENDIS 8 tk
- Fitting Position: Exhaust Side
- Required quantity: 8
- Operating Mode: Hydraulic
- Diameter [mm]: 34
- Height [mm]: 26
- Name: KLAPITAPP
- Manufacturer: MAX
- Fitting Position: Intake Side
- Required quantity: 12
- Operating Mode: Hydraulic
- Height [mm]: 24
- Diameter [mm]: 24
- Name: KLAPITAPP
- Manufacturer: MAX
- Quantity per packing unit: 8
- Operating Mode: Hydraulic
- Valve type: for exhaust valves
- Fitting Position: Cylinder Head
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Operating Mode: Hydraulic
- Weight [kg]: 0.048
- Outer Diameter [mm]: 24
- Fitting Position: Intake Side
- Valve type: for inlet valves
- Thickness [mm]: 24
- General Information: tappets; inlet
- Manufacturer: VIKA
- Operating Mode: Hydraulic
- Weight [kg]: 0.053
- Outer Diameter [mm]: 33.5
- Fitting Position: Intake Side
- Valve type: for exhaust valves
- Thickness [mm]: 26
- General Information: tappets; outlet
- Manufacturer: VIKA
- Required quantity: 8
- Operating Mode: Hydraulic
- Diameter [mm]: 33.5
-
Fitting Position: Intake Side,
Exhaust Side - Manufacturer: BGA
- Operating Mode: Hydraulic
- Fitting Position: Axle beam
- General Information: tappet
- Manufacturer: BORSEHUNG
- Operating Mode: Hydraulic
- Fitting Position: Axle beam
- General Information: tappet
- Manufacturer: BORSEHUNG
- Engine Code: BFB
- Required quantity: 12
- Quantity per packing unit: 8
- Fitting Position: Intake Side
- Operating Mode: Hydraulic
- Manufacturer: FEDERAL MOGUL
- Engine Code: BFB
- Operating Mode: Hydraulic
- Thickness [mm]: 24
- Outer Diameter [mm]: 24
- Fitting Position: Intake Side
- Height [mm]: 24
- Name: KLAPITAPP
- Manufacturer: KS
- Quantity per packing unit: 8
- Engine Code: BFB
- Required quantity: 8
- Quantity per packing unit: 8
- Fitting Position: Exhaust Side
- Operating Mode: Hydraulic
- Manufacturer: FEDERAL MOGUL
- Engine Code: BFB
- for OE number: 077109309G
- Fitting Position: Exhaust Side
- Operating Mode: Hydraulic
- Quantity: 1
- Manufacturer: FAI AUTOPARTS
- Fitting Position: Exhaust Side
- Thickness [mm]: 26
- Outer Diameter [mm]: 33.5
- Operating Mode: Hydraulic
- Weight [kg]: 0.053
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Exhaust Side
- Required quantity: 8
- Operating Mode: Hydraulic
- Height [mm]: 26
- Diameter [mm]: 34
- SVHC: No SVHC present!
- Name: KLAPITAPP
- Manufacturer: INA
- Fitting Position: Exhaust Side
- Thickness [mm]: 26
- Outer Diameter [mm]: 33.5
- Operating Mode: Hydraulic
- Weight [kg]: 0.32
- Observe service information:
- Name: SW 30 18 0005
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Intake Side
- Required quantity: 12
- Operating Mode: Hydraulic
- Height [mm]: 24
- Diameter [mm]: 24
- SVHC: No SVHC present!
- Name: KLAPITAPP
- Manufacturer: INA
- Engine Code: BFB
- Operating Mode: Hydraulic
- Thickness [mm]: 25.6
- Outer Diameter [mm]: 33.5
- Fitting Position: Exhaust Side
- Height [mm]: 25.6
- Manufacturer: KOLBENSCHMIDT
- Quantity per packing unit: 8
- Thickness [mm]: 24
- Outer Diameter [mm]: 24
- Operating Mode: Hydraulic
- Fitting Position: Intake Side
- Weight [kg]: 0.048
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: Alfa Romeo,
Fiat, VAG - Number of pins: 2
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Operating Mode: Electric
- Number of pins: 2
-
Name: JUHTKLAPP,
NUKKVOLLI ASEND - Manufacturer: MAX
-
Lisainfo: 54-
1207 -
Additional information: 54-
1207
- for article number: 271 051 01 77
- Width 1 [mm]: 80
- Height 1 [mm]: 25
- Length 1 [mm]: 80
- Weight [g]: 278
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Operating Mode: Electric
-
Name: PINGUTI,
MOOTORIKETT - Manufacturer: MAX
- Operating Mode: Electric
- Number of pins: 2
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: DRM
- Manufacturer: JP GROUP
- Lisainfo: Camshaft adjuster unit
- Additional information: Camshaft adjuster unit
- Operating Mode: Electric
- Number of pins: 2
- Connector Shape: rectangular
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Operating Mode: Hydraulic
- Fitting Position: Axle beam
- Quantity: 12x8
- Quantity Unit: Kit
-
General Information: tappets kit
(12*8/ set) - Manufacturer: BORSEHUNG
- Construction Year from: 08.2002
- Construction Year to: 12.2004
- Number of pins: 1
- Pin Shape: Flat
- Plug Type: Male
- Material: Metal
- Length [mm]: 165
- Width [mm]: 112
- Height [mm]: 102
- Manufacturer: GATES
- Number of connectors: 2
- Manufacturer: ERA
- Connector Shape: rectangular
- Housing Colour: white
-
Operating Mode: Electric-
hydraulic -
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of pins: 2
- Weight [kg]: 1.05
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.