Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Name: Radiator
- Quality class: ZJ
Lisainfo: BEETLE, 11- (kvaliteediklass Z)
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 416
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 65280A
-
Lisainfo: VOLKSWAGEN CC
(358) (11- ) 1.8 TSI -
Additional information: VOLKSWAGEN CC
(358) (11- ) 1.8 TSI
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with air conditioning
- Fitting Position: Rear
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 625
- Core Width [mm]: 405
- Core Depth [mm]: 18
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Radiator type: Mechanically jointed cooling fins
- Packaging length [cm]: 97.5
- Packaging width [cm]: 58.5
- Weight [kg]: 4.26
- Manufacturer: AKSDASIS
- Fitting Position: Rear
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 34
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 648*406*26
- Additional information: 648*406*26
- Fitting Position: Rear
- Vehicle Equipment: for vehicles without air conditioning
-
for PR number: 8Z4,
8Z5, 8Z7 - Material: Aluminium
- Core Length [mm]: 415
- Core Width [mm]: 650
- Core Depth [mm]: 34
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: MAX
- Core Length [mm]: 648
- Core Width [mm]: 406
- Core Depth [mm]: 26
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Trim Level: Schnellverschlu?
- Packaging length [cm]: 82.4
- Packaging width [cm]: 44.8
- Packaging height [cm]: 9.7
- Weight [kg]: 2.92
- Manufacturer: AKSDASIS
- Vehicle Equipment: for vehicles with air conditioning
- Fitting Position: Rear
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Manufacturer: JP GROUP
-
Lisainfo: Radiator,
650x415 mm, PL/ ALU -
Additional information: Radiator,
650x415 mm, PL/ ALU
- Cooling fins material: Aluminium
- Core Depth [mm]: 24
- Core Length [mm]: 650
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Fitting Position: Rear
- Vehicle Equipment: for vehicles without air conditioning
- Material: Aluminium
- Core Length [mm]: 648
- Core Width [mm]: 388
- Core Depth [mm]: 26
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 648*406*26
- Additional information: 648*406*26
- Name: Radiator
- Quality class: PJ
Lisainfo: "Tootja: KOYO
BEETLE, 11-
(kvaliteediklass: PJ)"
- Name: Radiator
- Quality class: PJ
Lisainfo: "Tootja: SRL
BEETLE, 11-
(kvaliteediklass: PJ)"
- Heating/Cooling: for vehicles with extra cooling
- Core Length [mm]: 625
- Core Width [mm]: 408
- Core Depth [mm]: 18
-
Lisainfo: Radiator,
engine cooling -
Additional information: Radiator,
engine cooling
- Radiator type: Brazed cooling fins
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Core Length [mm]: 628
- Core Width [mm]: 408
- Core Depth [mm]: 16
- Manufacturer: TYC OWIETLENIE
- Fitting Position: Front
- Heating/Cooling: Auxiliary Radiator
- Material: Aluminium
- Core Length [mm]: 625
- Core Width [mm]: 408
- Core Depth [mm]: 16
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 745*406*18
- Additional information: 745*406*18
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 34
- Water Tank Material (radiator): Plastic
-
Vehicle Equipment: for vehicles with/
without air conditioning - Transmission Type: Manual Transmission
- Packaging height [cm]: 11.5
-
Net Weight [g]: 2,
937 - Packaging width [cm]: 45
- Packaging length [cm]: 84
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Cooling fins material: Aluminium
- Core Depth [mm]: 16
- Core Length [mm]: 625
- Core Width [mm]: 408
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 65294
-
Lisainfo: VOLKSWAGEN CADDY IV
(SA) (15- ) 1.2 TSI -
Additional information: VOLKSWAGEN CADDY IV
(SA) (15- ) 1.2 TSI
- Engine Code: CAXC
-
Transmission Type: Automatic Transmission,
Manual Transmission - Vehicle Equipment: for vehicles with air conditioning
- for OE number: 1K0121251H
- Material: Aluminium
-
Weight [g]: 3,
920 - Frame Material: Plastic
- Core Length [mm]: 650
- Core Width [mm]: 414
- Core Depth [mm]: 32
-
Gross Weight [g]: 5,
600 - Manufacturer: DENSO
- Core Width [mm]: 626
- Core Length [mm]: 406
- Core Depth [mm]: 18
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 22
- Outlet Ø [mm]: 22
- Heating/Cooling: for vehicles without oil cooler
- Weight [kg]: 3.64
- Manufacturer: VALEO
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 626
- Core Width [mm]: 408
- Core Depth [mm]: 16
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 17
-
Net Weight [g]: 2,
300 - Packaging height [cm]: 57
- Packaging length [cm]: 84
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.