• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 500
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-AU-024
• Manufacturer: NTY

Lisainfo: ENG. 1.4TFSI,2.8FSI,3.0TFSI AUDI A3 07-12,A6 C7 11-18,A7 11-15, A8 D4 10-18, VW GOLF V/VI 07-, JETTA III 07-10, SEAT ALTEA 07-, LEON 07-12 /DIAGNOSTYCZNA, ZA KATALIZATOREM, Dœ.CAœK. 500MM Additional information: ENG. 1.4TFSI,2.8FSI,3.0TFSI AUDI A3 07-12,A6 C7 11-18,A7 11-15, A8 D4 10-18, VW GOLF V/VI 07-, JETTA III 07-10, SEAT ALTEA 07-, LEON 07-12 /DIAGNOSTYCZNA, ZA KATALIZATOREM, Dœ.CAœK. 500MM

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Regulating Probe
• Length [mm]: 440
• Fabrication Number: ESL-VW-009
• Manufacturer: NTY

• Resistor [Ohm]: 6
• Number of circuits: 4
• Length [mm]: 451
• Conductor Number: 4
• Cable Length [mm]: 451
• Lambda Sensor: Heated
• Name: MM OSM313
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Engine Code: CAXC
• Emission Standard: Euro 5
• for PR number: 7MG, 7MN
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: CAXC
• Construction Year from: 04.2010
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Emission Standard: Euro 4 (D4), Euro 5
• Number of pins: 4
• Block Separation:
• Construction Year to: 08.2012
• Transmission Type: Dual-Clutch Transmission, Manual Transmission
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: CAXC
• Emission Standard: Euro 4 (D4)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Transmission Type: Manual Transmission, Automatic Transmission
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: after catalytic converter
• Engine Code: CAXC
• for PR number: 0GG
• Block Separation:
• Cable Length [mm]: 500
• Manufacturer: DELPHI
• Name: DE ES20678-12B1

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 4 (D4)
• Fitting Position: before catalytic converter
• Engine Code: CAXC
• for PR number: 0GG
• Cable Length [mm]: 440
• Name: DE ES21187-12B1
• Manufacturer: DELPHI

• Construction Year to: 06.2008
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 681
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV672

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 595
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV712

• Engine Code: CAXC
• Emission Standard: Euro 4
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAXC
• Emission Standard: Euro 4
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Name: SW 33 10 3138
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2008
• Emission Standard: Euro 4 (D4)
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• for OE number: 03C 906 262 T
• Weight [kg]: 0.131
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Socket colour: brown
• Overall Length [mm]: 400
• Number of pins: 4
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CAXC, CAXC/CMSA
• for PR number: 7MG
• Fitting Position: after catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Length [mm]: 480
• Cable Length [mm]: 750
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Transmission Type: Dual-Clutch Transmission
• Number of circuits: 4
• Manufacturer: BOSCH

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: Euro 4 (D4), Euro 5
• Number of pins: 4
• Block Separation:
• Transmission Type: Dual-Clutch Transmission, Manual Transmission
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 06.2008
• Emission Standard: Euro 4 (D4)
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 555
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Weight [kg]: 0.141
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 5
• Transmission Type: Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: CAXC
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Length [mm]: 550
• Number of pins: 4
• Socket colour: black
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: CAXC
• Emission Standard: Euro 4 (D4)
• Exhaust System: for pre-catalytic converter
• for OE number: 03C906262T
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 440
• Number of pins: 4
• Weight [g]: 96
• Gross Weight [g]: 126
• Name: DN DOX-1703
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Engine Code: CAXC
• for OE number: 03C906262AA, 03C906262AD, 036906262AA
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 107
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Construction Year from: 04.2010
• Construction Year to: 08.2012
• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 5
• Resistor [Ohm]: 4.9
• Length [mm]: 800
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 800
• Manufacturer: MAGNETI MARELLI

• Engine Code: CAXC
• Lambda Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe
• Construction Year to: 06.2008
• Number of pins: 4
• Length [mm]: 550
• Housing Colour: black
• Alternative Repair Kit: 0893355
• Manufacturer: METZGER

• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368086
• Manufacturer: VALEO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Engine Code: CAXC, CMSA
• for PR number: 7MG
• Cable Length [mm]: 615
• Name: DE ES21368-12B1
• Manufacturer: DELPHI

• Engine Code: CAXC, CMSA
• for PR number: 7MG
• Emission Standard: Euro 5
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 800
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Transmission Type: Dual-Clutch Transmission
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: F00HL00351
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: CAXC, CMSA
• for PR number: 7MG
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CAXC, CAXC/CMSA
• for PR number: 7MG
• Fitting Position: before catalytic converter
• Emission Standard: Euro 5
• Required quantity: 1
• Colour: grey
• Length [mm]: 750
• Cable Length [mm]: 735
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.374
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Emission Standard: Euro 5
• Construction Year to: 08.2012
• Block Separation:
• Construction Year from: 04.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Fitting Position: Front
• Lambda Sensor: Finger probe
• General Information: lambda probe; front
• Manufacturer: VIKA

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Emission Standard: Euro 5
• Number of pins: 6
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: CAXC
• Construction Year to: 08.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Emission Standard: Euro 4 (D4)
• Transmission Type: Manual Transmission
• Number of circuits: 4
• Overall Length [mm]: 500
• Manufacturer: BOSCH

• Construction Year to: 08.2012
• Emission Standard: Euro 5
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• Manufacturer: FAE

• Engine Code: CAXC, CMSA
• Emission Standard: Euro 5
• Block Separation:
• Clutch: for vehicles with double clutch
• Construction Year from: 04.2010
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Cable Length [mm]: 750
• Manufacturer: METZGER