• Supplementary Article/Supplementary Info: with seal
• Lisainfo: Water pump
• Additional information: Water pump

• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• for OE number: 03L 121 011
• Manufacturer: KAMOKA

• Transmission Type: 6-Speed Manual Transmission
• Fabrication Number: CPW-VW-051
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with parking heater
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 2
• Name: Kaabli remondikomplekt, lisaveepump
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Construction Year from: 01.2012
• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Service exchange part:
• Supplementary Article/Info 2: with evaporator
• reinforced version:
• Model Year from: 2009
• Manufacturer: DOLZ
• Name: DO A224

• Construction Year from: 01.2012
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Water pump

• Trim Level: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Construction Year from: 01.2012
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Manufacturer: METELLI

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTITECH

• Engine Code: CGLC
• Vehicle Identification Number (VIN) from: 8K-8-000001
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Construction Year from: 01.2012
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Weight [kg]: 0.76
• Name: AI 1992
• Manufacturer: AIRTEX

• Engine Code: CGLC
• Manufacturer: MAGNETI MARELLI

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538006010
• Additional information: 538006010

• Engine Code: CGLC
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Name: VEEPUMP
• Manufacturer: PIE

• Operating Mode: Electric
• Fabrication Number: CPZ-AU-014
• Manufacturer: NTY
• Name: NTY CPZ-AU-014

• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: Heat-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Manufacturer: SKF
• Name: SK VKPC81269

• for OE number: 5N0 965 561 A
• Manufacturer: KAMOKA

• Construction Year from: 01.2013
• Engine Code: CGLC
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 06H 121 601 F
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Voltage [V]: 12
• for OE number: 8K0 965 561
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-022

Lisainfo: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08- Additional information: AUDI A4 B8 2.0/ 3.0TDI 09-, A5 8T3 1.8/2.0/3.0TFSI, 2.0/2.7/3.0TDI, 3.2FI, S5 3.0/4.2 07-, Q5 8RB 2.0/3.0TDI, 2.0/3.0TFSI 08-

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.75
• Name: VEEPUMP
• Manufacturer: VAL

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose diameter [mm]: 22
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer Restriction: BUEHLER
• Observe system fill quantity:
• Always compare old and new part (in particular OE No.):
• Housing Type: Synthetic Material Housing
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 5N0965561A
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: NRF

• Vehicle Equipment: for vehicles with auxiliary water pump
• Manufacturer Restriction: BUHLER
• Operating Mode: Electric
• Manufacturer: DOLZ

• for OE number: 8K0965561A
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Name: Lisaveepump
• Manufacturer: NRF

• Engine Code: CGLC
• Vehicle Identification Number (VIN) from: 8K-8-000001
• Name: Lisaveepump
• Manufacturer: MAG

• General Information: additional coolant pump
• Manufacturer: VIKA

• Construction Year from: 01.2013
• Engine Code: CGLC
• Operating Mode: Electric
• Voltage [V]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Trim Level: AUX
• for OE number: 5N0965561A
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: DAY

• Version: 2
• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS
• Name: NI 831073

• Weight [kg]: 0.342
• Packaging height [cm]: 16
• Packaging width [cm]: 13
• Packaging length [cm]: 13
• Operating Mode: Electric
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: CON

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A224
• Manufacturer: DOLZ
• Name: DO KD100

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• for article number: 570043N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 2.442
• Manufacturer: AKSDASIS

• Number of belts: 1
• Weight [kg]: 2.77
• Name: AI WPK-199201
• Manufacturer: AIRTEX

• Driven Units: Camshaft
• Trim Level: HT -KTBWP
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Operating Mode: Electric
• Manufacturer: GATES

• Engine Code: CGLC
• Vehicle Identification Number (VIN) from: 8K-8-000 001
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump
• Manufacturer: PIE

• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth 1: 160
• Manufacturer: SNR
• Name: SN KDP457.720

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055032
• Additional information: 530055032

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2012
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: BUGATTI

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Manufacturer: SKF
• Lisainfo: VKMC 01148-2 SKF
• Additional information: VKMC 01148-2 SKF

• Construction Year from: 01.2012
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: GRAF

• Driven Units: Camshaft
• Engine Code: CGLC, CGLD
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Engine Code: CGLC, CGLD
• Driven Units: Camshaft, Water Pump
• Width [mm]: 25
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with water pump
• Pulleys contained: 4
• Supplementary Article/Info 2: with fastening material
• Number of belts: 1
• Number of Teeth: 160
• Weight [kg]: 3.383
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CGLC, CGLD
• Driven Units: Camshaft, Water Pump
• Pulleys contained: 4
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Operating Mode: Mechanical
• Weight [kg]: 7.159
• Manufacturer: VAICO

Supplementary Article/Supplementary Info: with attachment material, with coolant, with water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.