• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-012

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 34
• Height [mm]: 100
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Shape: Cylindrical
• Supplementary Article/Info 2: with seal ring
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Quantity Unit: Piece
• Transmission Code: 0B5, DL501
• Filter type: Pressure Filter
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MEY

• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-005
• Name: NTY FSF-AU-005
• Manufacturer: NTY

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Filter type: Spin-on Filter
• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.024
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: S-Tronic 7-Gang
• Outer Diameter [mm]: 34
• Inner Diameter [mm]: 19
• Height [mm]: 100
• Manufacturer: HENGST FILTER

Transmission Type: Automatic Transmission, Manual-/optional automatic transmission

• Transmission Type: CVT automatic transmission (stepless)
• Transmission number from: 26058
• Filter type: Screen Filter, Suction Filter
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Diameter [mm]: 34
• Height [mm]: 99.3
• Inner Diameter 2 [mm]: 19
• Height 1 [mm]: 93
• Packaging height [cm]: 10.9
• Net Weight [g]: 25
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Manufacturer: KNECHT
• Name: KN HX186D

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Spin-on Filter, Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-006

• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: FSF-AU-004
• Transmission Code: DL501 / 0B5
• Filter type: Filter Insert
• Observe system fill quantity:
• Name: NTY FSF-AU-004
• Manufacturer: NTY

Transmission Type: 7-Speed Dual-Clutch Transmission, Automatic Transmission

• Transmission Type: CVT automatic transmission (stepless)
• Transmission number from: 26058
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Diameter [mm]: 61
• Height [mm]: 207
• Inner Diameter 2 [mm]: 7
• Inner Diameter 3 [mm]: 13.7
• Transmission Type: CVT automatic transmission (stepless)
• Packaging height [cm]: 21.5
• Net Weight [g]: 304
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: KNECHT
• Name: KN HX155

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 214.5
• Inner Diameter 2 [mm]: 7
• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Packaging width [cm]: 17.5
• Packaging length [cm]: 22.5
• Packaging height [cm]: 30
• Net Weight [g]: 440
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, CVT automatic transmission (stepless)

• Filter type: Screen Filter
• Length [mm]: 197
• Width [mm]: 158
• Thickness [mm]: 95
• Material: Plastic
• Weight [kg]: 0.29
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 7-Speed Dual-Clutch Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Length [mm]: 197
• Width [mm]: 158
• Thickness [mm]: 95
• Material: Plastic
• Weight [kg]: 0.29
• Manufacturer: SWAG
• Name: SW 30 10 2142

Transmission Type: 7-Speed Dual-Clutch Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• See accessories list for additionally required parts:
• Weight [kg]: 0.321
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Clutch: for vehicles with double clutch
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: VW
• Quantity Unit: Set
• Transmission Code: DL501, 0B5
• Number of mounting bores: 15
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 161
• Height [mm]: 92
• Transmission Code: DL501
• Manufacturer: KAMOKA FILTRY

Transmission Type: 7-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Weight [kg]: 0.377
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-041
• Manufacturer: NTY

Lisainfo: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/ Additional information: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/

• Transmission ID: KSR, LAT, LLA, NDW, NRJ, NYM, PCG, PVM
• Model Year to: 2012
• Block Separation:
• Model Year from: 2013
• Filter type: Filter Insert
• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Filter type: Filter Insert, Spin-on Filter
• Supplementary Article/Supplementary Info: with oil filter housing
• Housing Type: Synthetic Material Housing
• Transmission Code: 0AW
• Observe system fill quantity:
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 90
• Height [mm]: 50
• for OE number: 0B5 325 429 E S1
• Supplementary Article/Supplementary Info: with seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DSG)
• Transmission Type: for 7-speed automatic transmission
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: Dual-Clutch Transmission
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with seal
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.471
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Width [mm]: 90
• Height [mm]: 50
• Weight [kg]: 0.33
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: FEB
• Lisainfo: 109100 FEBI
• Additional information: 109100 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Model Year from: 2011
• Transmission ID: NHQ;NSA;PWY;PJU
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501, 0B5
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Filter type: Screen Filter
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: JPA

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, Dual-Clutch Transmission

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Width [mm]: 90
• Height [mm]: 50
• Weight [kg]: 0.33
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 30 10 9100
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Weight [kg]: 0.36
• Warranty: 3 years warranty
• Name: CE 31SKV056
• Manufacturer: ESEN SKV

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 197
• Weight [kg]: 0.3
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Transmission Code: DSG, DL501, 0B5
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: VW
• Quantity Unit: Set
• Number of mounting bores: 15
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with seal
• Clutch: for vehicles with double clutch
• Transmission Code: S-Tronic (DL501)
• See accessories list for additionally required parts:
• Weight [kg]: 0.516
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• See accessories list for additionally required parts:
• Filter type: Spin-on Filter, Filter Insert
• Weight [kg]: 0.353
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Lisainfo: V10-3021 VAI
• Additional information: V10-3021 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.