• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-2574
• Additional information: 72-2574

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shape: round

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-VW-009
• Manufacturer: NTY

• Fitting Position: Front Axle
• Height [mm]: 206
• Manufacturer: MAX
• Lisainfo: 72-2185
• Additional information: 72-2185

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.11
• Observe service information:
• Name: KRUVIKOMPLEKT,VEDRUAMORT-RATTALAAGRIKORPUS
• Manufacturer: FEB
• Additional information: FE27876
• Lisainfo: FE27876

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: protective pipe; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Manufacturer: FEB
• Additional information: F22142
• Lisainfo: F22142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT 05-/TIGUAN/TOURAN/SUPERB 08-

• Fitting Position: Front Axle both sides
• Length [mm]: 205
• Weight [kg]: 0.065
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Name: SW 30 92 2142
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Fabrication Number: AB-VW-007
• Manufacturer: NTY

• Quantity: 2
• Fitting Position: Front Axle
• Material: Thermoplast
• Weight [kg]: 0.07
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Manufacturer: SASIC

• Fitting Position: Rear Axle Right, Rear Axle Left
• Weight [kg]: 0.09
• Name: DY 73-27014
• Manufacturer: DYS

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles without sports suspension
• for PR number: UA0, UA1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 143
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1X0
• Model Year from: 2012
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 64
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Name: IM 37485
• Manufacturer: ORIGINAL IMPERIUM

• for PR number: 1X0
• Model Year from: 2012
• Weight [kg]: 0.23
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST
• Lisainfo: 2398-007-KIT FEBEST
• Additional information: 2398-007-KIT FEBEST

• for OE number: N10628301
• Thread Size: M12x1,5

• Model Year from: 2012
• Weight [kg]: 0.107
• Packaging length [cm]: 9.2
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fitting Position: Front Axle

• Thread Size: M12x1.5
• Screw length below head [mm]: 78
• Fitting Position: Rear Axle

• Engine Code: CLJA, CFFB
• Suspension: for vehicles without electronic suspension control
• for PR number: UA0, UA1, UA3
• Block Separation:
• Fitting Position: Rear Axle
• Thickness [mm]: 143
• Weight [kg]: 0.1
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CLJA, CFFB
• Suspension: for vehicles without electronic suspension control
• for PR number: UA0, UA3
• Block Separation:
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Thickness [mm]: 143
• Name: Puhver, vedrustus
• Manufacturer: MAX

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shape: round
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-2430
• Additional information: 72-2430

• for OE number: 1T0511359
• Fitting Position: Rear Axle
• Weight [g]: 109
• Name: IM 35129
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shape: round
• Name: CFD PK4761
• Manufacturer: DACO

• Model Year from: 2012
• Model Year to: 2015
• Fitting Position: Rear Axle
• Length [mm]: 143
• Weight [kg]: 0.122
• Packaging length [cm]: 14.3
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• for OE number: 3B0512131H
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Height [mm]: 206
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• for PR number: G05, G12
• Block Separation:
• Thickness [mm]: 85
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.08
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.24
• Name: Montaa§ikomplekt, roolissteem
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for vehicle type: RS
• Fitting Position: Front Axle
• Manufacturer: JAPKO

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control

• Engine Code: CLJA, CFFB
• Suspension: for vehicles without electronic suspension control
• for PR number: UA0, UA1, UA3
• Block Separation:
• Thickness [mm]: 143
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Shape: round
• Weight [kg]: 0.1
• Manufacturer: SWAG
• Name: SW 30 93 1699

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CLJA, CFFB
• Suspension: for vehicles without electronic suspension control
• for PR number: UA0, UA1, UA3
• Block Separation:
• Thickness [mm]: 143
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Shape: round
• Weight [kg]: 0.1
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension

• for PR number: G43
• Thickness [mm]: 89
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.09
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2015
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Manufacturer: FEBEST

• for PR number: 1X0
• Model Year from: 2012
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• not for vehicle type: RS
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without electronic suspension control, for vehicles without sports suspension

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension

• not for vehicle type: RS
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Name: CFD PK0207
• Manufacturer: DACO

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with standard suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SUPERB/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SUPERB/PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with sports suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SUPERB/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SUPERB/PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shape: round
• Name: CFD PK4726
• Manufacturer: DACO

• for PR number: G43
• Thickness [mm]: 89
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.083
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• not for vehicle type: RS
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control

• not for vehicle type: RS
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: KYB910056
• Lisainfo: KYB910056

Suspension: for vehicles without electronic suspension control, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0113

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for OE number: 3C0511359D
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Fitting Position: Front Axle Left, Front Axle Right
• Material: PU (Polyurethane), Thermoplast
• Suspension: for vehicles with standard suspension
• Weight [g]: 270
• Component Number: 4
• Name: IM 51017
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Suspension: for vehicles with standard suspension
• Shape: round
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• not for vehicle type: RS
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shape: round
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.4
• Shape: round
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE