Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Alternative Repair Kit: 5961.308.602
- Additionally required articles (article numbers): 5961.308.591
-
Oil - manufacturer recommendation: ZF LifeguardFluid,
7.4 DCT - Supplementary Article/Supplementary Info: without oil
-
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Transmission Code: DQ-
500 - Manufacturer: ZF
- Name: ZF 5961.306.996
SVHC: No information available, please contact the manufacturer!
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 - Capacity [litre]: 6
-
Transmission Code: 02E,
0D9, DQ250 - Vehicle Equipment: for vehicles with direct shift transmission
- Manufacturer: AIC
Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring Transmission Type: for 6-speed automatic transmission, Dual-Clutch Transmission Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 -
Transmission Code: DSG,
0DL, 0DD, 02G, DQ 500 - Capacity [litre]: 6
- Manufacturer: AIC
Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring Transmission Type: not for 6-speed dual-clutch transmission, not for 7-speed dual-clutch transmission Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 - See accessories list for additionally required parts:
- Capacity [litre]: 6
-
Transmission Code: DSG,
DQ400E, 0DL, 0DD, 02G, DQ500 - Supplementary Article/Supplementary Info: with seal
- Quantity Unit: Set
- Weight [kg]: 6.442
- Manufacturer: VAICO
-
Additional information: V10-
3223 VEMO -
Lisainfo: V10-
3223 VEMO
Transmission Type: for 7-speed dual-clutch transmission, for 6-speed dual-clutch transmission Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: DSG,
DQ400E, 0DL, 02G, DQ500, 0DD, 0BH - Manufacturer Restriction: VW
- Supplementary Article/Supplementary Info: with accessories
- Quantity Unit: Set
-
Alternative Repair Kit: 100 135 0103/
XK, 100 135 0103/ SK - Capacity [litre]: 6
- Supplementary Article/Info 2: with oil quantity for standard oil change
-
Name: OSADE KOMPLEKT,
OLIVAHETUS- AUTOMAATKIGUKAST - Manufacturer: MEY
Transmission Type: 6-Speed Dual-Clutch Transmission, 7-Speed Dual-Clutch Transmission General Information: Our MEYLE-KITS are available with various amounts of oil The MEYLE standard kit (100 135 xxxx) contains the necessary amount of oil for the service interval so that an exact oil change can be performed. The MEYLE extension kit (XK) (100 135 xxxx /XK) contains the total fluid capacity of the relevant transmission and a reserve quantity of transmission oil for performing a complete transmission oil change. The MEYLE short kit (SK) (100 135 xxxx /SK) is supplied without transmission oil and offers the option to determine the amount of transmission oil yourself, for example for flushing the transmission oil.
-
Transmission Code: DQ250,
02E, 0D9 - Capacity [litre]: 6
- See accessories list for additionally required parts:
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 -
Supplementary Article/Supplementary Info: with gaskets/
seals - Vehicle Equipment: for vehicles with direct shift transmission
- Weight [kg]: 6.528
- Quantity Unit: Set
- Manufacturer: VAICO
Transmission Type: Dual-Clutch Transmission, 6-Speed Automatic Transmission Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with direct shift transmission
-
Supplementary Article/Info 2: with seal ring,
with oil quantity for oil flushing -
Transmission Code: 02E,
0D9, DQ250 - Capacity [litre]: 8
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 - Manufacturer: AIC
Transmission Type: for 6-speed automatic transmission, Dual-Clutch Transmission Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 -
Transmission Code: DSG,
0DL, 0DD, 02G, DQ 500 - Capacity [litre]: 10
- Manufacturer: AIC
Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring Transmission Type: not for 6-speed dual-clutch transmission, not for 7-speed dual-clutch transmission Installation Information: The recommended replacement intervals of the vehicle manufacturer must be observed. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Transmission Code: DSG,
DQ500, DQ400E, 0DL, 0DD, 0BH, 02G - Manufacturer Restriction: VW
- Quantity Unit: Set
-
Alternative Repair Kit: 100 135 0103,
100 135 0103/ SK - Capacity [litre]: 10
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: MEY
Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Dual-Clutch Transmission Supplementary Article/Supplementary Info: with accessories, with oil quantity for full oil change General Information: MEYLE oil change kits for automatic transmissions. A full set of premium-quality components for the professional repair of popular gearbox types.
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
-
Transmission Code: 02G,
DSG, DQ400E, 0DD, 0DL, DQ500 - Capacity [litre]: 10
- See accessories list for additionally required parts:
- Supplementary Article/Supplementary Info: with seal
-
Supplementary Article/Info 2: with seal ring,
with oil quantity for oil flushing - Quantity Unit: Set
- Weight [kg]: 10.184
- Manufacturer: VAICO
Transmission Type: for 7-speed dual-clutch transmission, for 6-speed dual-clutch transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks