Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 02.2007
-
Fitting Position: Front Axle,
both sides, Front - Quality: OE Performance
- Material: Rubber
- Colour: silver
- Weight [g]: 4
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 203 323 06 85
- Manufacturer: GSP
- Height [mm]: 21.5
- Material: Rubber
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 27
- Weight [kg]: 0.003
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: inner,
Rear Axle - Inner Diameter [mm]: 11
- Material: Rubber
- Required quantity: 2
-
Name: Paigutus -
Kndmik DB T. W203 R WEW 13, 3MM - Manufacturer: TED
- Height [mm]: 21.5
- Material: Rubber
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 19
- Weight [kg]: 0.003
- Inner Diameter 2 [mm]: 27
-
Name: STABILISAATOR,
AASSII - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23.5
- Inner Diameter [mm]: 22
- Length [mm]: 44
- Width [mm]: 44
- Height [mm]: 41
- for OE number: 2033232285
- Manufacturer: SASIC
- Diameter 4 [mm]: 20
- Inner Diameter [mm]: 20.6
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.092
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 203 326 0881
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 17
- Mounting Type: Rubber Mount
- Manufacturer: TRUCKTEC
- Diameter 4 [mm]: 21
- Diameter [mm]: 21
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.109
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 02.2007
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 51
- Inner Diameter [mm]: 13
- Manufacturer: GATES PASKI PRZEWODY
- Construction Year to: 02.2007
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 48
- Inner Diameter [mm]: 20
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: inner,
Front - Required quantity: 2
-
Material: Rubber,
Rubber with fabric lining - Weight [g]: 49
- Inner Diameter [mm]: 14
- Name: IM 35800
- Manufacturer: ORIGINAL IMPERIUM
- Construction Year to: 02.2007
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 49
- Inner Diameter [mm]: 15
- Manufacturer: GATES PASKI PRZEWODY
- for OE number: 203 326 0181
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 15
- Mounting Type: Rubber Mount
- Manufacturer: TRUCKTEC AUTOMOTIVE
- for OE number: 203 326 0081
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 16
- Mounting Type: Rubber Mount
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Fitting Position: Rear Axle both sides,
inner - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 40
- Length [mm]: 37
- paired article number: 271749
- Weight [kg]: 0.05
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Rear
- Material: Rubber
- Weight [g]: 53
- Inner Diameter [mm]: 14
- Name: IM 35836
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle,
inner - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 18.5
- Inner Diameter [mm]: 17
- Length [mm]: 49
- Width [mm]: 49
- Height [mm]: 37
- for OE number: 2033260881
- Manufacturer: SASIC
- Construction Year to: 02.2007
- Quality: OE Performance
-
Material: Rubber,
Metal - Fitting Position: Front
- Colour: black
- Weight [g]: 47
- Inner Diameter [mm]: 21.5
- Manufacturer: GATES PASKI PRZEWODY
-
Vehicle Identification Number (VIN) from: E 017571,
F 457375, R 131145 - Width [mm]: 37
- Inner Diameter [mm]: 16
-
Outer Diameter [mm]: 39,
48 - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 37
- Thickness [mm]: 48
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 39
- Fitting Position: Rear Axle
- Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik DB T. W203 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: E 017571,
F 457375, R 131145 - Width [mm]: 37
- Inner Diameter [mm]: 16
-
Outer Diameter [mm]: 39,
48 - Fitting Position: Rear Axle
- Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik DB T. W203 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 37
- Thickness [mm]: 48
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 39
- Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI