• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 69.5
• Width [mm]: 62
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Front Axle
• Brake System: Brembo
• Height [mm]: 71.7
• Width [mm]: 120
• Thickness [mm]: 17.4
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: In-Line Filter, with integrated pressure regulator
• Height [mm]: 160
• Outer Diameter [mm]: 75
• Inlet Ø [mm]: 8
• Pressure [bar]: 3.8
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Fitting Position: Rear Axle
• Width 1 [mm]: 61.7
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Length [mm]: 62
• Height [mm]: 69.5
• Thickness [mm]: 16
• WVA Number: 21305
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Width 1 [mm]: 119.5
• Height [mm]: 71.7
• Thickness [mm]: 17.4
• Bore Distance 1 [mm]: 1.8
• Bore Distance 2 [mm]: 7.1
• Brake System: Brembo
• for OE number: 34205820
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Thickness [mm]: 17.7
• Length [mm]: 120
• Weight [kg]: 1.9
• Height 1 [mm]: 71.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• WVA Number: 23745
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 69.8
• Thickness [mm]: 15.3
• Braking System: only in conjunction with steel brake discs
• Fitting Position: Rear Axle
• Width [mm]: 62
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Height [mm]: 69.8
• Brake System: ATE
• Width [mm]: 61.7
• Thickness [mm]: 15.3
• Manufacturer: LPR

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: Brembo
• Width [mm]: 120
• Height [mm]: 72
• Thickness [mm]: 17
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Length [mm]: 61.6
• Width [mm]: 70
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.4
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.84
• Name: SW 10 91 6158
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2006
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 69.7
• Thickness [mm]: 15.4
• WVA Number: 21305
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.88
• Manufacturer: VALEO
• Name: VA 301617

• Fitting Position: Rear Axle
• Width [mm]: 62
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 69.6
• Height [mm]: 61.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE-TEVES
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Article number of recommended accessories: MWI0195, MBA1640
• Width [mm]: 61.8
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21305
• Brake System: Teves
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.8
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Width [mm]: 119.5
• Height [mm]: 71.7
• Thickness [mm]: 17.4
• Brake System: Brembo
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Width [mm]: 62
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Thickness [mm]: 17.8
• Width [mm]: 119.8
• Height [mm]: 71.6
• Brake System: BREMBO
• Article number of recommended accessories: KS0068, KS0069, KS0138, KS0136, KS0062
• Manufacturer: LPR

• Height [mm]: 71.3
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Fitting Position: Front Axle
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Parameter: DP1010.10.0755
• Fitting Position: Rear Axle
• Thickness [mm]: 15.4
• Length [mm]: 61.6
• Height [mm]: 69.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: Ate-teves
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• FMSI Code: D603-7484
• Test Mark: E9 90R-01825/1049
• WVA Number: 21305
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 62.1
• Width 2 [mm]: 61.8
• Height 1 [mm]: 69.6
• Height 2 [mm]: 69.6
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP841

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 162
• Outer Diameter [mm]: 75
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• for OE number: 124 420 0720
• Supplementary Article/Supplementary Info: with spring
• Width [mm]: 20
• Brake Pad: with lining
• Diameter [mm]: 164
• Fitting Position: Rear Axle
• Weight [kg]: 1.004
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter 1 [mm]: 74
• Outer Diameter 2 [mm]: 82
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Height [mm]: 157
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21305
• Thickness [mm]: 15.4
• Width [mm]: 61.8
• Height [mm]: 69.7
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 16
• Length [mm]: 61.4
• Height [mm]: 69.5
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: Teves
• WVA Number: 21305
• Name: SK VKBP90502
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01708/016
• Height [mm]: 69.8
• Width [mm]: 61.7
• Thickness [mm]: 15.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake System: TRW
• WVA Number: 23144
• Length 1 [mm]: 131.1
• Height 1 [mm]: 69.8
• Height 2 [mm]: 62.1
• Thickness 1 [mm]: 19.5
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Height [mm]: 70
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Width [mm]: 119.8
• Thickness [mm]: 17.8
• Height [mm]: 71.6
• Number of wear indicators [per axle]: 2
• Brake System: BREMBO
• Warning Contact Length [mm]: 95
• Manufacturer: LPR

• Filter type: In-Line Filter
• Height [mm]: 161
• Outer Diameter [mm]: 75
• Inlet Ø [mm]: 10
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Fitting Position: Front Axle
• Article number of recommended accessories: 20-0334
• Height [mm]: 71.3
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Height [mm]: 70
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Bypass Valve Opening Pressure [bar]: 5
• Filter type: Spin-on Filter
• Height [mm]: 165
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 75
• Quality class: PJ
• Name: Fuel filter

• Fitting Position: Rear Axle
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 70
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21305
• Manufacturer: BREMBO
• Name: BR P 50 017

• Construction Year to: 12.2006
• Thickness [mm]: 17.4
• Width [mm]: 119.5
• Height [mm]: 71.7
• Brake System: BREMBO
• Fitting Position: Front Axle
• Weight [kg]: 1.819
• Manufacturer: VAICO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 3.8
• Filter type: with integrated pressure regulator
• Height [mm]: 160
• Outer Diameter [mm]: 75
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: MAX
• Lisainfo: PF-2121
• Additional information: PF-2121

• Construction Year to: 12.2006
• Fitting Position: Front Axle
• Brake System: BREMBO
• Width [mm]: 120
• Height [mm]: 71.3
• Thickness [mm]: 17.2
• WVA Number: 23271, 23745
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.78
• Manufacturer: VALEO
• Name: VA 302044

• Height [mm]: 160
• Pressure [bar]: 3.8
• Outer Diameter [mm]: 75
• Filter type: with integrated pressure regulator
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Return pipe connector diameter [mm]: 10
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 120
• Height [mm]: 71.3
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Length [mm]: 117.8
• Width [mm]: 71.5
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with anti-squeak plate, with fastening material
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16.8
• Weight [kg]: 1.945
• Observe service information:
• Name: SW 10 91 6454
• Manufacturer: SWAG

Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 119.4
• Height [mm]: 71.5
• Thickness [mm]: 16.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Height [mm]: 160
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 74
• Packing Type: Box
• Filter type: In-Line Filter
• Packaging length [cm]: 7.2
• Packaging width [cm]: 7.2
• Packaging height [cm]: 9.6
• Name: CH CFF100438
• Manufacturer: CHAMPION

• Fitting Position: Rear Axle
• Brake System: ATE
• Width [mm]: 62
• Height [mm]: 70
• Thickness [mm]: 16
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Article number of recommended accessories: 8DK 355 252-001
• Width [mm]: 61.8
• Height [mm]: 69.6
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21305
• Brake System: Teves
• Weight [kg]: 0.8
• Name: HE 8DB355007581
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 120
• Height [mm]: 71.3
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake System: BREMBO
• WVA Number: 23045
• Length 1 [mm]: 119.8
• Height 1 [mm]: 71.6
• Thickness 1 [mm]: 17.2
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Construction Year from: 03.2004
• FMSI Code: D847-7960
• Test Mark: E1 90R-02A0378/0476
• WVA Number: 23271 23745
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 119.7
• Width 2 [mm]: 119.7
• Height 1 [mm]: 70.9
• Height 2 [mm]: 70.9
• Thickness 1 [mm]: 17.2
• Thickness 2 [mm]: 17.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1828

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 69.5
• Thickness [mm]: 15.7
• Brake System: ATE
• Test Mark: E1 90R-02A0498/0585
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 13.0460-0236.2, 13.0460-0239.2, 24.8190-0401.2, 24.8190-0410.2

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 300
• Thickness [mm]: 16
• Test Mark: R90 Homologated
• Width [mm]: 62
• Height [mm]: 69
• Weight [kg]: 0.85
• Height 1 [mm]: 69
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21305
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Construction Year from: 03.2004
• Parameter: DP1010.10.1052
• Fitting Position: Front Axle
• Thickness [mm]: 16.2
• Length [mm]: 118
• Height [mm]: 71.6
• Wear Warning Contact: incl. wear warning contact
• Brake System: Brembo
• Warning Contact Length [mm]: 97, 102
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 119.4
• Height [mm]: 71.5
• Thickness [mm]: 16.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 23271
• Thickness [mm]: 17.3
• Width [mm]: 119.8
• Height [mm]: 71.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS
• Lisainfo: 0986494576 BOSCH
• Additional information: 0986494576 BOSCH

• Fitting Position: Front Axle
• Number of pads: 4
• Thickness [mm]: 17
• Length [mm]: 119.5
• Height [mm]: 70.6
• Wear Warning Contact: incl. wear warning contact
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 23271, 23745
• Name: SK VKBP80198E
• Manufacturer: SKF

• Bypass Valve Opening Pressure [bar]: 5
• Filter type: Spin-on Filter
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 8
• Height [mm]: 165
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
KLASA S (W220), 10.9
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
KLASA S (W220), 10.9
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Width [mm]: 120
• Thickness [mm]: 18
• Height [mm]: 71
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 23271, 23745
• Name: BR P 50 053
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: incl. wear warning contact
• Test Mark: E9 90R 01107/282
• Height [mm]: 71.6
• Width [mm]: 117.8
• Thickness [mm]: 17.2
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 74.5
• Height [mm]: 157.8
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 23271
• Test Mark: 90R-02A00165/00007
• Length [mm]: 119.8
• Thickness [mm]: 17.7
• Height [mm]: 71.3
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Filter type: In-Line Filter
• Diameter [mm]: 74.5
• Height [mm]: 156.8
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Pressure [bar]: 3.8
• Packaging height [cm]: 16.6
• Net Weight [g]: 265
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Manufacturer: KNECHT
• Name: KN KL82

• Height [mm]: 162
• Outer Diameter [mm]: 74.5
• Outlet Ø [mm]: 6, 8, 10
• Inlet Ø [mm]: 8
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Width [mm]: 117.8
• Height [mm]: 71.6
• Thickness [mm]: 17.2
• Wear Warning Contact: incl. wear warning contact
• Test Mark: E9 90R-02A1062/0282
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Filter type: In-Line Filter, with integrated pressure regulator
• Pressure [bar]: 3.8
• Height [mm]: 160
• Outer Diameter [mm]: 75
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Return pipe connector diameter [mm]: 10
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 252-001
• Width [mm]: 119.8
• Height [mm]: 71.4
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 23745
• Brake System: Brembo
• Weight [kg]: 1.8
• Name: HE 8DB355010101
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Article number of recommended accessories: 98024701
• Width [mm]: 119.8
• Height [mm]: 71.4
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 23745
• Brake System: Brembo
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 345
• Thickness [mm]: 17.7
• Test Mark: R90 Homologated
• Width [mm]: 120
• Height [mm]: 71.4
• Weight [kg]: 1.9
• Height 1 [mm]: 71.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: BREMBO
• Packing Type: Box
• WVA Number: 23462
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• directional:
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake System: BREMBO
• Width [mm]: 120
• Height [mm]: 71
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Width [mm]: 119.5
• Height [mm]: 71.7
• Thickness [mm]: 17.4
• Bore Distance 1 [mm]: 1.8
• Bore Distance 2 [mm]: 7.1
• Observe dimensions:
• Brake System: Brembo
• Test Mark: E9 90R-02A1279/0282
• MAPP code available:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 13.0460-0155.2, 13.0460-0237.2, 13.0460-0275.2, 24.8190-0410.2, 24.8190-0416.2, 13.0460-0503.2, 13.0460-0507.2 Installation Information: Warning notice ---------------------- Work on the SBC brake system may only be carried out by trained specialists! ¿ Risk of injury! ¿ System is pressurized! ¿ Observe manufacturer¿s guidelines! ¿ Before starting maintenance and repair work the system must be deactivated. ¿ After finishing maintenance and repair work the system must be reactivated. ¿ Only use appropriate service and diagnosis equipment! ¿ Recommendation: ContiSys Check Item no. 03.9301-6000.4 ContiSys Scan Item no. 03.9301-5000.4 Bleeding unit ATE FB 30s Item no. 03.9302-3010.4 Continental is not liable for damages which occur due to incorrect installation of the product.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 345
• Thickness [mm]: 17.7
• Test Mark: R90 Homologated
• Width [mm]: 119.8
• Height 1 [mm]: 71.5
• Material: Ceramic
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Packing Type: Box
• WVA Number: 23462
• Packaging length [cm]: 14
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake System: BREMBO
• Width [mm]: 120
• Height [mm]: 71
• Thickness [mm]: 18
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Width [mm]: 120
• Thickness [mm]: 18
• Height [mm]: 71
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 23271, 23745
• Name: BR P 50 053X
• Manufacturer: BREMBO

General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.

• Fitting Position: Front Axle
• Braking System: Low dust brake pads
• Brake System: BREMBO
• Width [mm]: 118
• Height [mm]: 72
• Thickness [mm]: 17
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN