Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle both sides,
Front Axle both sides - Weight [kg]: 0.026
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Block Separation:
- Thickness [mm]: 27
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Material: Rubber
- Weight [kg]: 0.026
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 21
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. DB P. W202/ 210 - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Block Separation:
- Thickness [mm]: 20.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 35
- Material: Rubber
- Weight [kg]: 0.018
-
Name: Laager -
Kndmik. DB P. W202/ 210 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Height [mm]: 51.5
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Thickness [mm]: 13
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 3
- Fitting Position: Rear Axle
- Weight [kg]: 0.149
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Knobs: 1
- Fitting Position: Rear Axle
- Thickness [mm]: 5
- Weight [kg]: 0.092
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 9
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.121
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 30837
- Length [mm]: 93
- Width [mm]: 83
- Thickness [mm]: 15
- Material: Rubber
- Fitting Position: Front Axle Right
- Weight [kg]: 0.05
-
Name: Laager -
Kndmik DB P. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 9
- Fitting Position: Rear Axle
- Weight [kg]: 0.133
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of Knobs: 3
- Fitting Position: Rear Axle
- Thickness [mm]: 13
- Weight [kg]: 0.149
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Right,
Upper - Material: Rubber
-
paired article number: GH-
623302V -
Manufacturer: AUTO-
GH
-
Fitting Position: Front Axle Left,
Upper - Material: Rubber
-
paired article number: GH-
623302H -
Manufacturer: AUTO-
GH
- Thickness [mm]: 17
- Inner Diameter [mm]: 63
- Outer Diameter [mm]: 105
- Material: Rubber
- Number of Knobs: 4
- Fitting Position: Rear Axle
- Weight [kg]: 0.149
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 102
- Height [mm]: 35
- Weight [kg]: 0.149
- Number of Knobs: 4
- Thickness [mm]: 17
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Suspension: for vehicles without sports suspension
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Name: CFD PK3325
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- Length [mm]: 122
-
External Thread Size: M14 x 1,
5 - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.25
- for OE number: 000 330 00 18
-
Name: MONTAA?IKOMPLEKT,
ROOLISSTEEM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with standard suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance
- for OE number: 2033200744
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 280
- Component Number: 4
- Name: IM 50305
- Manufacturer: ORIGINAL IMPERIUM
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
-
Fitting Position: Front Axle Right,
Front Axle Left -
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
- for OE number: 2033200844
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 270
- Component Number: 4
- Name: IM 50307
- Manufacturer: ORIGINAL IMPERIUM
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: BIL