• Fitting Position: Left
• for OE number: 35428218
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2044

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
KLASA A (W169), 09.0
(kvaliteediklass: Q)"

• Thread Size: 9 mm
• Manufacturer: VERNET
• Additional information: WS2698
• Lisainfo: WS2698

• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• for OE number: 099 905 3800
• Manufacturer: TRUCKTEC

• Number of pins: 2
• Length [mm]: 88
• Height [mm]: 89.5
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Manufacturer: ERA

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Manufacturer: SWAG
• Name: SW 10 94 5443

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-ME-000

• Construction Year from: 09.2006
• Construction Year to: 04.2009
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358058181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966431

Transmission Type: not for 5-speed automatic transmission, not for sequential manual transmission

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10269

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fabrication Number: ECP-ME-007
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 05080346AA
• Manufacturer: KAMOKA

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Manufacturer: NTY

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Fabrication Number: ECP-ME-003
• Manufacturer: NTY

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Length [mm]: 40
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Sensor Type: Inductive Sensor
• Number of pins: 2

• for model code: 2 Pin
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Construction Year to: 04.2009
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11178
• Additional information: SS11178 DELPHI
• Lisainfo: SS11178 DELPHI

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114371

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 642 905 0000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRU

• Length [mm]: 40
• Number of connectors: 3
• Weight [kg]: 0.02
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. PORSCHE 911, 911 TARGA, BOXSTER, BOXSTER SPYDER, CAYENNE, CAYMAN 2.7-4.8 07.04-

Manufacturer: MAGNETI MARELLI

• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Manufacturer: VERNET

• Length [mm]: 40
• Number of connectors: 3
• Weight [kg]: 0.02
• Name: SW 10 93 7984
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 2
• Manufacturer: DELPHI

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 551393
• Fitting Depth [mm]: 40
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Length [mm]: 202
• Number of connectors: 2
• Weight [kg]: 0.019
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 4
• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11033

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Transmission Type: Manual Transmission
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 24.2
• Supplementary Article/Info 2: with seal ring, without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10218

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Construction Year to: 04.2009
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Quantity: 4
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fuel Type: Petrol
• Used part return not required:
• Fabrication Number: EPP-ME-013
• Manufacturer: NTY

• Engine Code: 273.967
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Construction Year to: 04.2009
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Colour Coding: grey
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year to: 04.2009
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 330
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year from: 09.2006
• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 320
• Cable Length [mm]: 320
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• for OE number: 273 094 05 48
• Manufacturer: KAMOKA

• Construction Year to: 04.2009
• Weight [kg]: 0.31
• Warranty: 3 years warranty
• Name: CE 07SKV160
• Manufacturer: ESEN SKV

• Length [mm]: 50
• Width [mm]: 27
• Thickness [mm]: 52
• Inner Diameter [mm]: 6.7
• Outer Diameter [mm]: 21
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 325
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Fabrication Number: ESL-CH-032
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Required quantity: 4
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121591
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2006
• Construction Year to: 04.2009
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 310
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 04.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Name: CE 09SKV402
• Manufacturer: ESEN SKV

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe, Heated
• Length [mm]: 550
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 550
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 04.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 330
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year to: 04.2009
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10360-12B1

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Required quantity: 2
• Cable Length [mm]: 600
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Construction Year to: 04.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 560
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Broadband lambda sensor
• Number of circuits: 5
• Overall Length [mm]: 560
• Manufacturer: FAST