• Fitting Position: inner, behind the axle, Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: MITSUBISHI, VOLVO
• Additional information: MITSUBISHI, VOLVO

• Fitting Position: outer, Front Axle Right
• Axle alignment required after fitting:
• paired article number: V95-0140
• Weight [kg]: 0.222
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ZTT-MS-007A

Fitting Position: Rear Axle, inner, outer, Left, Right, Lower, Rear, behind the axle, Centre

• Fitting Position: Rear Axle, inner, outer, Left, Right, Lower, Rear
• Fabrication Number: ZTT-MS-000C
• Manufacturer: NTY

• for OE number: MR102012
• Fitting Position: Rear Axle Left, Lower, outer, Rear Axle Right
• Manufacturer: GSP

• Fitting Position: Front, Lower Front Axle
• Fabrication Number: ZTP-MS-006A

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Fabrication Number: ZTT-MS-000B
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Manufacturer: GSP

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VOLVO S/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VOLVO S/V40
(kvaliteediklass: PJ)"

• Fitting Position: outer, Rear Axle Lower
• Control/Trailing Arm Type: for semi-trailing arm
• Fabrication Number: ZTT-MS-000A
• Manufacturer: NTY

• Fitting Position: Rear Axle Lower
• Fabrication Number: ZTT-MS-007B

• Fitting Position: Front Axle, inner, behind the axle, Left, Lower
• Fabrication Number: ZTP-MS-006B
• paired article number: ZTP-MS-006C

• Fitting Position: Front Axle, inner, behind the axle, Right, Lower
• Fabrication Number: ZTP-MS-006C
• paired article number: ZTP-MS-006B

• for OE number: 30 620 785
• Fitting Position: Rear Axle, Lower
• Manufacturer: GSP

• Fitting Position: Rear Axle, outer, inner
• Control/Trailing Arm Type: for semi-trailing arm
• Fabrication Number: ZTT-CH-006A
• Manufacturer: NTY

• Fitting Position: inner, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Weight [g]: 144
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Length [mm]: 60
• Name: IM 32503
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Front Axle both sides, Front
• Manufacturer: ASHIKA

• Control/Trailing Arm Type: for control arm
• Fitting Position: both sides, Rear Axle, Lower, Rear
• Inner Diameter [mm]: 12
• Required quantity: 4
• Name: TG 00745593
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 36
• Fitting Position: Upper, Front, inner, outer, Rear Axle
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Manufacturer: TEDGUM
• Name: TG 00743876

• Fitting Position: Rear Axle, Left, Right
• Weight [g]: 143
• Manufacturer: IMPERGOM
• Name: IM 1572

• Fitting Position: Rear Axle, Left, Right, Front
• Weight [g]: 380
• Name: IM 1570
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37.5
• Length [mm]: 59.7
• paired article number: 270640
• Weight [kg]: 0.14
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Right, Front Axle Left, inner, Lower

• Fitting Position: inner, Rear Axle Lower
• Weight [kg]: 0.15
• Outer Diameter [mm]: 36
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• for OE number: 4113A041
• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Manufacturer: GSP

• Fitting Position: Rear Axle, Centre
• Manufacturer: GSP

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 45
• Name: ALT 91659AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower, Front, Rear Axle Left, Rear Axle Right
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)"

• Production date from: 200105
• Fitting Position: Rear, inner
• Length [mm]: 79
• Weight [kg]: 0.185
• Quantity: 2
• Packaging length [cm]: 9.1
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Manufacturer: FEBEST
• Lisainfo: 0498-002-PCS2 FEBEST
• Additional information: 0498-002-PCS2 FEBEST

• Fabrication Number: ZTT-MS-000D
• Manufacturer: NTY

Fitting Position: Rear Axle, outer, in front of axle, Left, Right, Lower

• Width [mm]: 53
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 64
• Fitting Position: Front Axle Left, Rear
• Manufacturer: JAPANPARTS

• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.149
• Packaging length [cm]: 6
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: inner, outer, Rear Axle, Upper, Front
• Required quantity: 2
• Manufacturer: TEDGUM
• Name: TG 00443740

• Width [mm]: 53
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 64
• Fitting Position: Front Axle Right, Rear
• Manufacturer: JAPANPARTS

• Width [mm]: 53
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 64
• Fitting Position: Front Axle Right, Rear
• Manufacturer: ASHIKA

• Width [mm]: 53
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 64
• Fitting Position: Front Axle Right, Rear
• Manufacturer: JAPKO

• Width [mm]: 53
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 64
• Fitting Position: Front Axle Left, Rear
• Manufacturer: JAPKO

• Fitting Position: Lower, Front Axle Right
• paired article number: 511844
• Manufacturer: GSP

• Fitting Position: Front Axle, Lower, Rear, Right
• Required quantity: 1
• paired article number: 00441663
• Manufacturer: TEDGUM

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle, Lower
• Axle alignment required after fitting:
• Weight [kg]: 0.151
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Front
• Mounting Type: Rubber-Metal Mount

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.228
• Outer Diameter [mm]: 36
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.6
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

for OE number: MB809220, MB809221, MB809222, MB809223, MR130479, MR130480, MR491345, MR491346, MR491347, MR491348, MR915104, MR915105, MW30620785, MW30620786

• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 0.307
• Packaging length [cm]: 9
• Packaging width [cm]: 8
• Packaging height [cm]: 5.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Rear, Left
• Required quantity: 1
• paired article number: 00441664
• Manufacturer: TEDGUM

• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 0.301
• Packaging length [cm]: 8.2
• Packaging width [cm]: 7.5
• Packaging height [cm]: 5.7
• Manufacturer: FEBEST

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 77
• Thickness 1 [mm]: 75
• Manufacturer: DELPHI
• Name: DE TD1075W

• Fitting Position: outer, inner, Rear Axle
• Weight [kg]: 0.171
• Packaging length [cm]: 5
• Packaging width [cm]: 3.6
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 75
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Front Axle Right
• Inner Diameter [mm]: 21
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush right

• Fitting Position: Rear, Front Axle Left
• Inner Diameter [mm]: 21
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, Front
• Required quantity: 2
• paired article number: VKDS 436004
• Height [mm]: 75
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 77.2
• Name: SK VKDS436004
• Manufacturer: SKF

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.365
• Packaging length [cm]: 11.5
• Packaging width [cm]: 8
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

for OE number: MB809220, MB809221, MB809222, MB809223, MR130479, MR130480, MR491345, MR491346, MR491347, MR491348, MR915104, MR915105, MW30620785, MW30620786

• Fitting Position: Rear Axle both sides
• Outer Diameter [mm]: 36
• Height [mm]: 106
• Name: ALT 91658AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 75
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 40
• Height [mm]: 45
• Name: ALT 91672AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Rear
• Weight [kg]: 0.27
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• paired article number: L10807
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Thickness [mm]: 75
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.458
• Manufacturer: SWAG
• Name: SW 80 94 1112

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Fitting Position: Right, Front Axle
• Weight [g]: 403
• Name: IM 7039
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thickness [mm]: 75
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
M. COLT/LANCER, 92-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
M. COLT/LANCER, 92-
(kvaliteediklass: PJ)"

• Fitting Position: Front, Rear Axle Upper
• Weight [kg]: 0.456
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Packaging length [cm]: 7.6
• Packaging width [cm]: 7
• Packaging height [cm]: 7
• Manufacturer: FEBEST

• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Outer Length [mm]: 106
• Fitting Position: Rear Axle Left, Rear Axle Right
• Hole Spacing [mm]: 83.5
• Weight [kg]: 0.22
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, inner, behind the axle, Lower
• paired article number: TD388W
• Manufacturer: DELPHI
• Name: DE TD389W

• Fitting Position: Front Axle Left, inner, behind the axle, Lower
• paired article number: TD389W
• Manufacturer: DELPHI
• Name: DE TD388W

• Fitting Position: behind the axle, Front Axle Left, inner, Lower
• Inner Diameter [mm]: 20.5
• Outer Diameter [mm]: 62
• Length [mm]: 49
• paired article number: 270642
• Weight [kg]: 0.4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: behind the axle, Front Axle Right, inner, Lower
• Inner Diameter [mm]: 20.5
• Outer Diameter [mm]: 62
• Length [mm]: 49
• paired article number: 270641
• Weight [kg]: 0.4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Outer Length [mm]: 106
• Fitting Position: Rear Axle Left, Rear Axle Right
• Hole Spacing [mm]: 83.5
• Weight [kg]: 0.237
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Front
• Control/Trailing Arm Type: for trailing arm
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 70.1
• Width [mm]: 75
• SVHC: No SVHC present!
• Manufacturer: FAG