• Fabrication Number: ECT-RE-003
• Manufacturer: NTY
• Name: NTY ECT-RE-003

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: VQ37VHR
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Engine Code: VQ37VHR
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Corresponds to the original part in colour: blue, red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107531

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 2345012920
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Fitting Position: Front
• Cable Length [mm]: 1,360
• Manufacturer: ASHIKA

• Housing Colour: light blue
• Manufacturer: FAE

• Fitting Position: Front
• Cable Length [mm]: 1,360
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Number of pins: 2
• paired article number: HCA-NS-089
• Fabrication Number: HCA-NS-090

• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Number of pins: 2
• paired article number: HCA-NS-090
• Fabrication Number: HCA-NS-089

• paired article number: HCA-NS-118
• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-NS-117
• Manufacturer: NTY

• paired article number: HCA-NS-117
• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-NS-118

• Fabrication Number: ECP-NS-020
• Manufacturer: NTY

• Fitting Position: Right Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 02.2010
• Fitting Position: Front Axle
• Number of pins: 2
• Cable Length [mm]: 1,280

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-NS-127

• Number of pins: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 305

• Construction Year to: 10.2010
• Cable Length [mm]: 1,420
• Number of pins: 2
• Manufacturer: FAE

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-NS-091

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Frequency Range [MHz]: 433
• for OE number: 407001AY0A
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Frequency Range [MHz]: 315
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-003
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, after catalytic converter

• Number of pins: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 340

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Construction Year from: 08.2014
• Construction Year to: 12.2019
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 6
• Mounting Type: Bolted, Plugged
• Supplementary Article/Info 2: with groove, with screw, with valves
• Permissible maximum speed [km/h]: 210
• Housing Colour: black
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• Engine Code: VQ37VHR
• Lambda Sensor: Diagnostic Probe, Heated
• Resistor [Ohm]: 3.7
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 400
• Cable Length [mm]: 400
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM172

• Number of pins: 3
• Fitting Depth [mm]: 37.6
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: VQ37VHR
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV001

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Construction Year to: 07.2014
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Weight [kg]: 0.001
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Colour: black
• Manufacturer: FAE

• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.173
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2014
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066681
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: VQ37VHR
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 07.2014
• Fitting Position: Left
• for OE number: 226A0-ET000
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 120
• Name: DN DOX-1732
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Name: VA 368084
• Manufacturer: VALEO

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2012
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 226931NA0A
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-0615

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 11.2020
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: BOS

• Construction Year from: 08.2012
• Fitting Position: Left
• for OE number: 226931MR0A, 226933WY0A
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 118
• Manufacturer: DENSO
• Name: DN DOX-0557

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Engine Code: VQ37VHR
• Colour: chrome/black
• Name: Ohumassimootja
• Manufacturer: VDO

• Engine Code: VQ37VHR
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC