• Engine Number from: 02MF6390, 20R22449
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• Thickness [mm]: 2
• Shape: O-Ring
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: Z16XE
• Thread Size: M 14 x 1,5
• Length [mm]: 13
• Outer Diameter [mm]: 25
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Spanner Size: 19
• Length [mm]: 18
• Thread Size: M14x1,5
• Manufacturer: JP GROUP
• Lisainfo: Oil drain plug
• Additional information: Oil drain plug

• Engine Number to: 20R22448, 02MF6389
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 505.550, 505.540
• Manufacturer: ELRING
• Lisainfo: 115.100 ELR
• Additional information: 115.100 ELR

• Engine Code: X 16 XEL
• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: X 16 XEL
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: X 16 XEL
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 02MF6390, 20R22449
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• Thickness [mm]: 2
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Number from: 20R22449, 02MF6390
• Outer Diameter [mm]: 22
• Thickness [mm]: 2
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 18
• Weight [kg]: 0
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Number to: 20R22448, 02MF6389
• Material: Copper
• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Shape: A Shape
• DIN/ISO: 7603
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Number from: 20R22449, 02MF6390
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• Thickness [mm]: 2
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Alternative Repair Kit: 505.550, 505.540
• Manufacturer: ELRING

• Engine Code: X 16 XEL
• Length [mm]: 18
• Thread Size: M14x1,5x12
• Spanner Size: 19
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Length [mm]: 18
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 13.5
• Weight [kg]: 0.025
• Thread Size: M14 x 1,5
• Material: Steel
• Outer Diameter [mm]: 25
• Bolt Head-/Nut Design: Female Torx
• Thread Length [mm]: 10
• Manufacturer: METALCAUCHO

• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Bolt Head-/Nut Design: Female Torx
• Supplementary Article/Supplementary Info: with seal
• for OE number: 06 52 315, 1 722 061, 0311 42
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M14 x 1,50
• Supplementary Article/Info 2: with seal ring
• Length [mm]: 13.5
• Manufacturer: 3RG

• Engine Code: X 16 XEL
• Thread Size: M14x1,5
• Length [mm]: 13
• Additionally required articles (article numbers): 259.150.100
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Material: Copper
• Thickness [mm]: 1.5
• Packing Type: Blister Pack
• Manufacturer: CORTECO

• Length [mm]: 18
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 8.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 12
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 18
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 12
• Weight [kg]: 0.026
• Supplementary Article/Info 2: without seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 18
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 11
• Quality/ Grade: 8.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 12
• Weight [kg]: 0.026
• Supplementary Article/Info 2: without seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 16 XE
• Engine Number from: 20R22449, 02MF6390
• Block Separation:
• Thread Size: M14x1,5
• Length [mm]: 10
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Thread Size: M14
• Length [mm]: 34
• Manufacturer: BGA

• Engine Code: X 16 XEL
• Thread Size: M14x1,5
• Length [mm]: 13
• Supplementary Article/Info 2: with seal ring

• Engine Code: Z 16 XE
• Length [mm]: 13
• Outer Diameter [mm]: 25
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 10
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG
• Lisainfo: 40 90 4572 SWA
• Additional information: 40 90 4572 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 16 XE
• Length [mm]: 13
• Outer Diameter [mm]: 25
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 10
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Shape: O-Ring
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• Material: NBR (nitrile butadiene rubber)
• Thickness [mm]: 2
• Packing Type: Blister Pack
• Manufacturer: CORTECO
• Name: COU 041118S

• Engine Code: Z 16 XE
• Length [mm]: 13
• Outer Diameter [mm]: 25
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 10
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: FIS

• Engine Code: Z 16 XE
• Length [mm]: 13
• Outer Diameter [mm]: 25
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 10
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: Sulgurkruvi, olivann
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14 x 1,5
• Spanner Size: TX 45
• Bolt Head-/Nut Design: Female Torx
• Thread Length [mm]: 10.5
• Supplementary Article/Info 2: with seal ring
• Thread Pitch [mm]: 1.5
• Fitting Position: engine sided
• Surface: Zink-nickel coated
• Required quantity: 1
• Material: Steel
• Weight [kg]: 0.043
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Number from: 20R22449, 02MF6390
• Thread Size: M14x1,5x13,5
• Bolt Head-/Nut Design: Female Torx
• Alternative Repair Kit: 505.540
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Length [mm]: 18
• Thread Size: M 14 x 1,50 x 12
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Manufacturer: CORTECO
• Name: COU 220117S

• Engine Number from: 02MF6390, 20R22449
• Thickness [mm]: 2
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 22
• Shape: O-Ring
• Manufacturer: DR MOTOR
• Name: DRM 028

• Length [mm]: 14
• Thread Size: M 14 x 1,50 x 10,5
• Supplementary Article/Info 2: with seal ring
• Tightening torque to [Nm]: 14
• Material: Steel
• Surface: Zinc-coated
• Packing Type: Blister Pack
• Bolt Head-/Nut Design: Torx
• Manufacturer: CORTECO
• Name: COU 220110S

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper