Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 17
- Stabiliser Bar Diameter [mm]: 17
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Stabiliser Bar Diameter [mm]: 16
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 16
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
rear, ®16 mm -
Additional information: Grommet for stabilizer,
rear, ®16 mm
- Vehicle Identification Number (VIN) from: 61000001
- Fitting Position: Rear
- Special Purpose Vehicle: not for police vehicles
- Quantity: 2
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18
- Length [mm]: 38
- Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles with lowered suspension, for vehicles with sports suspension, for vehicles without bad road version
-
Vehicle Identification Number (VIN) to: 51999999,
58999999 - Fitting Position: Front
- Quantity: 2
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 22
- Stabiliser Bar Diameter [mm]: 24
- Manufacturer: DELLO AUTOMEGA
- Special Purpose Vehicle: not for police vehicles
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 16
- Length [mm]: 38
- Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Special Purpose Vehicle: for police vehicles
- Quantity: 2
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- Length [mm]: 38
- Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles with bad road version, for vehicles with sports suspension
- Vehicle Identification Number (VIN) to: 58999999
- Diameter 4 [mm]: 25
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 25
- Manufacturer: 3RG
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 16
- Width [mm]: 36
- Length [mm]: 38
- Height [mm]: 35.5
- Manufacturer: 3RG
-
Vehicle Identification Number (VIN) to: 51999999,
58999999 - Stabiliser Bar Diameter [mm]: 24
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 22
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 19
- Manufacturer: 3RG
-
Fitting Position: inner,
Rear Axle - Material: Rubber
- Required quantity: 2
-
Name: Paigutus -
Kndmik OPEL T. VECTRA C 02- 18MM - Manufacturer: TED
-
Vehicle Identification Number (VIN) to: 31004792,
38001235 - Stabiliser Bar Diameter [mm]: 25
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 25
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 18
- Manufacturer: 3RG
- not for trim level: Sport
- Block Separation:
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 16
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
Suspension: for vehicles without bad road version, for vehicles without lowered suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Block Separation:
-
Vehicle Identification Number (VIN) from: 41010578,
48008981, 31004793, 38001236 - Suspension: for vehicles without bad road version
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 25.2
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN
Vehicle Identification Number (VIN) to: 31006846, 38001235, 51999999, 58999999, 41010577, 48008980 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- for OE number: 0444 160
- Manufacturer: GSP
- Vehicle Identification Number (VIN) from: 61000001
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 18
- Replace in pairs only:
- Quantity per axle: 2
-
Name: Paigutus -
Kndmik OPEL T. VECTRA C 02- 18MM - Manufacturer: HAN
Suspension: for vehicles with lowered suspension, for vehicles with sports suspension, for vehicles without bad road version General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 17
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
Suspension: for vehicles with bad road version, for vehicles with sports suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 51999999,
58999999, 31004792, 38001235 -
Vehicle Identification Number (VIN) from: 41010578,
48008981 - Fitting Position: Front
- Quantity: 2
- Inner Diameter [mm]: 25
- Manufacturer: DELLO AUTOMEGA
- Stabiliser Bar Diameter [mm]: 17
- Length [mm]: 38
- Observe service information:
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 17
-
Name: Paigutus -
Kndmik OPEL T. VECTRA C - Manufacturer: MAX
- Stabiliser Bar Diameter [mm]: 24
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 44
- Thickness [mm]: 43
- Width [mm]: 42
- Inner Diameter [mm]: 22
-
Name: Paigutus -
Kndmik OPEL P. VECTRA C 03- - Manufacturer: MAX
- Quality: OE Performance
- Material: Rubber
- Fitting Position: Front
- Colour: black
- Weight [g]: 49
- Inner Diameter [mm]: 22
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Stabiliser Bar Diameter [mm]: 18
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Stabiliser Bar Diameter [mm]: 25
- Length [mm]: 40
- Material: Rubber
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right - Width [mm]: 45
- Thickness [mm]: 43
- Inner Diameter [mm]: 25
-
Name: Paigutus -
Kndmik OPEL P. VECTRA C - Manufacturer: MAX
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 36
- Inner Diameter [mm]: 18
- Manufacturer: GATES PASKI PRZEWODY
- Suspension: for vehicles without bad road version
-
Vehicle Identification Number (VIN) to: 31006846,
38001235, 51999999, 58999999 - Block Separation:
-
Vehicle Identification Number (VIN) from: 31006847,
38001236 - Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Weight [g]: 50
- Manufacturer: METALCAUCHO
-
Fitting Position: Left,
Right, inner, Rear Axle both sides - Inner Diameter [mm]: 19
- Mounting Type: Rubber Mount
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Special Purpose Vehicle: not for police vehicles
- Stabiliser Bar Diameter [mm]: 16
- Inner Diameter [mm]: 16
- Mounting Type: Rubber Mount
- Required quantity: 2
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.042
- Manufacturer: VAICO
Suspension: for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles without bad road version General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 37
- Inner Diameter [mm]: 16
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 3 50 145
- Manufacturer: GSP
- Vehicle Identification Number (VIN) to: 58999999
- Diameter 4 [mm]: 24
-
Fitting Position: outer,
Front Axle both sides - Overall Length [mm]: 40
- Inner Diameter [mm]: 22
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 18
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Special Purpose Vehicle: not for police vehicles
- Stabiliser Bar Diameter [mm]: 16
- Length [mm]: 38
- Colour: black
- Material: Rubber
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width [mm]: 38
- Thickness [mm]: 36
- Inner Diameter [mm]: 16
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
Suspension: for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear
- Required quantity: 2
- Weight [g]: 40
- Inner Diameter [mm]: 17
- Length [mm]: 38
- Name: IM 31465
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) from: 61000001,
68000001 -
Fitting Position: Front Axle Left,
Upper -
Mounting Type: Rubber-
Metal Mount - Stabiliser Bar Diameter [mm]: 24
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- for OE number: 71740113
- Manufacturer: GSP
- Stabiliser Bar Diameter [mm]: 17
- Length [mm]: 38
- Inner Diameter [mm]: 17
- Fitting Position: Rear Axle
- Weight [kg]: 0.04
- Manufacturer: SWAG
- Name: SW 40 93 1066
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 34
- Inner Diameter [mm]: 19
- Manufacturer: GATES PASKI PRZEWODY
- Fitting Position: Front Axle
- Weight [g]: 50
- Inner Diameter [mm]: 22
- Name: IM 25908
- Manufacturer: ORIGINAL IMPERIUM
- Stabiliser Bar Diameter [mm]: 17
- Length [mm]: 38
- Inner Diameter [mm]: 17
- Fitting Position: Rear Axle
- Weight [kg]: 0.04
-
Name: Paigutus -
Kndmik OPEL T. VECTRA C - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
OPEL ASTRA II
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
OPEL ASTRA II
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle both sides
- Weight [g]: 36
- Inner Diameter [mm]: 18
- Name: IM 25909
- Manufacturer: ORIGINAL IMPERIUM
- Vehicle Identification Number (VIN) to: 58999999
- Diameter 4 [mm]: 24
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
OPEL CORSA 00-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
OPEL CORSA 00-
(kvaliteediklass: PJ)"
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VECTRA C 02-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VECTRA C 02-
(kvaliteediklass: PJ)"
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VECTRA C 02-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VECTRA C 02-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
inner, Upper - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 22.5
- Length [mm]: 44
- Width [mm]: 32
- Height [mm]: 23
- for OE number: 350390
- Manufacturer: SASIC
-
Fitting Position: Front Axle,
inner, Lower - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 22.5
- Length [mm]: 48
- Width [mm]: 32
- Height [mm]: 23
- for OE number: 350391
- Manufacturer: SASIC
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 17
- paired article number: VKDS 455007
- Outer Diameter [mm]: 16.5
- Name: SK VKDS455007
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Material: Rubber
- Required quantity: 2
- Inner Diameter [mm]: 23
- Manufacturer: TEDGUM
-
Fitting Position: Rear Axle,
Lower - Stabiliser Bar Diameter [mm]: 17
- Inner Diameter 1 [mm]: 38.1
- Thickness 1 [mm]: 38.1
- Manufacturer: DELPHI
- Name: DE TD988W
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 34
- Inner Diameter [mm]: 20
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Rear Axle both sides,
inner - Inner Diameter [mm]: 19
- Outer Diameter [mm]: 32
- Length [mm]: 38
- paired article number: 270867
- Weight [kg]: 0.03
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Stabiliser Bar Diameter [mm]: 25
- Length [mm]: 40
- Width [mm]: 45
- Thickness [mm]: 42.5
- Inner Diameter [mm]: 23.3
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik OPEL P. VECTRA C - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 61000001,
68000001 -
Fitting Position: Front Axle Left,
Lower -
Mounting Type: Rubber-
Metal Mount - Stabiliser Bar Diameter [mm]: 24
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle both sides,
inner - Inner Diameter [mm]: 17
- Outer Diameter [mm]: 34
- Length [mm]: 38
- paired article number: 270865
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Stabiliser Bar Diameter [mm]: 25
- Length [mm]: 40
- Width [mm]: 45
- Thickness [mm]: 42.5
- Inner Diameter [mm]: 23.3
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Manufacturer: SWAG
- Name: SW 40 93 6543
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 22.5
- Mounting Type: Rubber Mount
- Weight [kg]: 0.046
- Length [mm]: 40
- Manufacturer: RTS
- Fitting Position: Front Axle
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 39
- Width [mm]: 42
- Mounting Type: Rubber Mount
- Name: ALT 86415AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 44
- Inner Diameter [mm]: 20
- Manufacturer: GATES PASKI PRZEWODY
- Stabiliser Bar Diameter [mm]: 17
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 17
- Required quantity: 2
-
Name: Paigutus -
Kndmik OPEL T. VECTRA C 02- 17MM - Manufacturer: MEY
-
Fitting Position: Front Axle both sides,
inner - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 39
- Length [mm]: 40
- paired article number: 270718
- Weight [kg]: 0.05
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 18
- paired article number: VKDS 455005
- Height [mm]: 36.5
- Inner Diameter [mm]: 18
- Manufacturer: SKF
- Name: SK VKDS455005
-
Vehicle Identification Number (VIN) to: 31004792,
38001235 - Stabiliser Bar Diameter [mm]: 25
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Required quantity: 2
-
Name: Paigutus -
Kndmik OPEL P. VACTRA C - Manufacturer: MEY
- Fitting Position: Rear Axle both sides
- Mounting Type: Rubber Mount
- Weight [kg]: 0.032
- Inner Diameter [mm]: 17
- Length [mm]: 38
- Manufacturer: RTS
-
Vehicle Identification Number (VIN) to: 51999999,
58999999 - Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 24
- paired article number: VKDS 355016
- Manufacturer: SKF
- Name: SK VKDS355016