• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-CT-001
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 318
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-CT-002
• Manufacturer: NTY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 318
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Pikkus (mm): 300
• Takistus [oom]: 9
• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 300
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: 1KR (384F)
• Voltage [V]: 12
• Length [mm]: 310
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV023

• Pikkus (mm): 425
• Ühendushulk: 4
• Takistus [oom]: 9
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 425
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Engine Code: 1KR (384F)
• Voltage [V]: 12
• Length [mm]: 390
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV058

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Kaablipikkus (mm): 289
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20558-12B1

• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 350
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV993

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV583

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ülekandeliinide arv: 4
• Pistikukatte kuju: nurgeline
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 185
• Keermemõõt: M18 x 1,5
• Kaal (kg): 0,125
• OE-numbri jaoks: 1618,K9
• Pistiku värv: must
• Pikkus (mm): 300
• Lambda andur: Sond, Keere eelmääritud
• Versioon: ZR-PLANAR
• Väljalaskesüsteem: katalüsaatori ees
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: CFA, CFB
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 303
• Pistikkontaktide arv: 4
• Kaal (kg): 0,098
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV086

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 303
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 318
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: CFA (384F)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• for OE number: 1618K9
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 894650D020
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 300
• Pistikkontaktide arv: 4
• Kaal (g): 107
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-2066

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur

• Engine Code: CFA (384F)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 04.2014
• Alternatively:
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 300
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Kaal (kg): 0,12
• Name: VA 368036
• Manufacturer: VALEO

• for OE number: 1618Q5
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 8946502060
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 425
• Pistikkontaktide arv: 4
• Kaal (g): 113
• Brutokaal [g]: 146
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
COROLLA (/E12U/, /E1
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
COROLLA (/E12U/, /E1
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pikkus (mm): 300
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77005
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 275
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI

• Construction Year to: 04.2014
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 300
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Kaal (kg): 0,12
• Manufacturer: VALEO