• Engine Code: CFA (384F)
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Pistiku värv: valge
• Keermemõõt: M 12x1,5
• Anduritüüp: NTC-andur
• Võtmekaugus: 19 mm
• Manufacturer: MEAT&DORIA

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Engine Code: CFA (384F)
• Manufacturer: FACET

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Fabrication Number: ECM-TY-000
• Manufacturer: NTY

• Pistikkontaktide arv: 2
• Name: DE AS10177
• Manufacturer: DELPHI

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-CT-001
• Manufacturer: NTY

• Required quantity: 1
• Manufacturer: BREMI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 318
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-CT-002
• Manufacturer: NTY

• Fitting Position: Suction Pipe
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BREMI

• Pistikkontaktide arv: 3
• Manufacturer: DELPHI
• Name: DE SS11150

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 318
• Name: Lambda andur
• Manufacturer: MAX

• Kõrgus (mm): 30
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Manufacturer: VERNET

• Engine Code: CFA (384F)
• Transmission Type: Manual Transmission
• Pikkus (mm): 63,3
• Ühenduste arv: 3
• Kaal (kg): 0,03
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CFA (384F)
• Name: EP 1.953.466
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Pikkus (mm): 300
• Takistus [oom]: 9
• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 300
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Engine Code: 1KR (384F)
• Voltage [V]: 12
• Length [mm]: 310
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV023

• Pikkus (mm): 425
• Ühendushulk: 4
• Takistus [oom]: 9
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 425
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Engine Code: 1KR (384F)
• Voltage [V]: 12
• Length [mm]: 390
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV058

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Kaablipikkus (mm): 289
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20558-12B1

• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 350
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV993

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV583

• Läbimõõt survetorusikuühendus [mm]: 5, 6,5
• Pikkus [m]: 1
• Materjal: Silikoon
• keem.omadus: õlikindel
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: +350
• Pingutusala alates [mm]: 10, 11, 11,5, 12,5
• Pingutusala kuni [mm]: 12,5, 13,5, 14, 15
• SVHC: SVHS aineid ei esine
• Manufacturer: HBE

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga Piirangutega toode/piirangu info 2: ühendusjuhtmestikuga, koos kaitsevoolikuga, koos nugisekaitsega, koos kammitsatega Tehniline informatsioon: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Pistikkontaktide arv: 4
• Surve alates [kPA]: 14
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ülekandeliinide arv: 4
• Pistikukatte kuju: nurgeline
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 185
• Keermemõõt: M18 x 1,5
• Kaal (kg): 0,125
• OE-numbri jaoks: 1618,K9
• Pistiku värv: must
• Pikkus (mm): 300
• Lambda andur: Sond, Keere eelmääritud
• Versioon: ZR-PLANAR
• Väljalaskesüsteem: katalüsaatori ees
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: CFA, CFB
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 303
• Pistikkontaktide arv: 4
• Kaal (kg): 0,098
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV086

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 303
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 318
• ka universaaltootena saadav vaata toode-nr.: 0258986602
• Soovituslik vahetusintervall (km): 250 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Mõõtepiirkond alates [kPa]: 10
• Mõõtepiirkond kuni [kPa]: 130
• mõõtepiirkond alates [V]: 0,9
• Mõõtepiirkond kuni [V]: 4,55
• Ühenduste arv: 4
• Manufacturer: VERNET

• Engine Code: CFA (384F)
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 138
• Väljundpinge alates [V]: 0,915
• Väljundpinge kuni [V]: 4,75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Engine Code: CFA (384F)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 300
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.998.235
• Ülekandeliinide arv: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• for OE number: 1618K9
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 894650D020
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 300
• Pistikkontaktide arv: 4
• Kaal (g): 107
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-2066

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur

• Engine Code: CFA (384F)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Lambda Sensor: Diagnostic Probe
• Kaablipikkus (mm): 300
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.998.235
• Ülekandeliinide arv: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• Ühenduste arv: 4
• Värv: must
• Kaal (kg): 0,03
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2014
• Alternatively:
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 300
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Kaal (kg): 0,12
• Name: VA 368036
• Manufacturer: VALEO

• for OE number: 1618Q5
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 8946502060
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 425
• Pistikkontaktide arv: 4
• Kaal (g): 113
• Brutokaal [g]: 146
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
COROLLA (/E12U/, /E1
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
COROLLA (/E12U/, /E1
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Pikkus (mm): 300
• Pistikkontaktide arv: 4
• tehnilise informatsiooni number: Universal 77005
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 275
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI

• Construction Year to: 04.2014
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 300
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Kaal (kg): 0,12
• Manufacturer: VALEO

• OE-numbri jaoks: 1920KN
• Pistikkontaktide arv: 4
• Riikide valik: Jaapan
• mitte riikidele: Jaapan
• Brutokaal [g]: 48
• Manufacturer: DENSO