• Construction Year to: 04.2013
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Diameter [mm]: 203
• Inner Brake Drum Height [mm]: 51
• Hole Arrangement/Number: 4/4
• Surface: Coated
• Lisainfo: ILMA LAAGRITA
• Additional information: ILMA LAAGRITA

• Construction Year to: 04.2013
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Inner Brake Drum Height [mm]: 54
• Hole Arrangement/Number: 6/4
• Surface: Coated
• Lisainfo: Brake Drum
• Additional information: Brake Drum

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Total Br. Drum Height [mm]: 83
• Inner Brake Drum Height [mm]: 53
• Outer brake drum diameter [mm]: 208
• Inner brake drum diameter [mm]: 181
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 52
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 04.2013
• Fitting Position: Rear Axle
• Drum diameter [mm]: 180
• Max.skimmed drum measure [mm]: 181
• Inner Brake Drum Height [mm]: 53.5
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size: M12x1,5
• Total Br. Drum Height [mm]: 83
• Outer brake drum diameter [mm]: 208
• Support plate diameter [mm]: 52
• Inner Diameter 2 [mm]: 52.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Number of Holes: 4
• Total Br. Drum Height [mm]: 76
• Inner Brake Drum Height [mm]: 50
• Outer brake drum diameter [mm]: 234
• Inner brake drum diameter [mm]: 204
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 52
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 12.2016
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180.2
• Outer brake drum diameter [mm]: 207.8
• Inner Brake Drum Height [mm]: 53
• Total Br. Drum Height [mm]: 82.9
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 52.25
• Supplementary Article/Info 2: without wheel bearing
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Supplementary Article/Info 2: without ABS sensor ring, without wheel bearing
• Inner brake drum diameter [mm]: 180
• Inner Brake Drum Height [mm]: 52
• Bolt Hole Circle Ø [mm]: 100
• Total Br. Drum Height [mm]: 83
• Outer brake drum diameter [mm]: 208
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BF426
• Quality class: PJ

Additional information: "Tootja: DELPHI
RENAULT CLIO
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
RENAULT CLIO
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner brake drum diameter [mm]: 203.3
• Inner Brake Drum Height [mm]: 50.5
• Outer brake drum diameter [mm]: 234
• Total Br. Drum Height [mm]: 76
• Hole Arrangement/Number: 04/04
• Bolt Hole Circle Ø [mm]: 100
• Max.skimmed drum measure [mm]: 204.5
• Number of Holes: 4
• Surface: Painted
• Manufacturer: JAPKO

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Inner Brake Drum Height [mm]: 54
• Total Br. Drum Height [mm]: 83
• Rim Hole Number: 4
• Wheel Hub Diameter [mm]: 52
• Outer brake drum diameter [mm]: 208
• Weight [kg]: 4.51
• Bolt Hole Circle Ø [mm]: 100
• Wheel Hub Diameter 2 [mm]: 52
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Supplementary Article/Info 2: without ABS sensor ring, without wheel bearing
• Inner brake drum diameter [mm]: 180
• Outer brake drum diameter [mm]: 208
• Inner Brake Drum Height [mm]: 52
• Total Br. Drum Height [mm]: 83
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Bolt Hole Circle Ø [mm]: 100
• for shaft diameter [mm]: 52
• Name: Brake drum
• Quality class: PJ

Lisainfo: "Tootja: SRL
RENAULT CLIO
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
RENAULT CLIO
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Inner Brake Drum Height [mm]: 53.5
• Number of Holes: 4
• Outer brake drum diameter [mm]: 180
• Total Br. Drum Height [mm]: 83
• Max.skimmed drum measure [mm]: 181.25
• Fitted Diameter [mm]: 52
• Name: BR 14.7754.10
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: without ABS sensor ring, without wheel bearing
• Inner brake drum diameter [mm]: 203
• Inner Brake Drum Height [mm]: 51
• Bolt Hole Circle Ø [mm]: 100
• Total Br. Drum Height [mm]: 76
• Outer brake drum diameter [mm]: 234
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50.5
• Total Br. Drum Height [mm]: 76
• Max.skimmed drum measure [mm]: 204.45
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size 1: M12x1,5
• Test Mark: E190R-02D0966/0748
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203
• Inner Brake Drum Height [mm]: 51
• Total Br. Drum Height [mm]: 76
• Rim Hole Number: 4
• Wheel Hub Diameter [mm]: 52
• Outer brake drum diameter [mm]: 234
• Bolt Hole Circle Ø [mm]: 100
• Supplementary Article/Info 2: without ABS sensor ring
• Weight [kg]: 5.1
• Wheel Hub Diameter 2 [mm]: 52
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Construction Year to: 07.2008
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50
• Total Br. Drum Height [mm]: 76
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Supplementary Article/Info 2: without wheel bearing
• Manufacturer: BOSCH

• Construction Year to: 12.2016
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50
• Total Br. Drum Height [mm]: 76
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Supplementary Article/Info 2: without wheel bearing
• Manufacturer: BOSCH

• Construction Year to: 04.2013
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Inner brake drum diameter [mm]: 203
• Max.skimmed drum measure [mm]: 204.5
• Inner Brake Drum Height [mm]: 48
• Support plate diameter [mm]: 52
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size: M12x1,5
• Total Br. Drum Height [mm]: 76
• Outer brake drum diameter [mm]: 234
• Test Mark: E1 90R-02D0955/0095
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Brake Drum Height [mm]: 50.5
• Number of Holes: 4
• Supplementary Article/Info 2: without wheel bearing set, without ABS sensor ring
• Outer brake drum diameter [mm]: 203
• Total Br. Drum Height [mm]: 76
• Max.skimmed drum measure [mm]: 204.5
• Fitted Diameter [mm]: 51.9
• Name: BR 14.7257.10
• Manufacturer: BREMBO

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Painted
• Diameter 1/ Diameter 2 [mm]: 35 / 240
• paired article number: 56387
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Brake Drum Height [mm]: 50.5
• Number of Holes: 4
• Supplementary Article/Info 2: without wheel bearing set, without ABS sensor ring
• Outer brake drum diameter [mm]: 203
• Total Br. Drum Height [mm]: 76
• Max.skimmed drum measure [mm]: 204.45
• Fitted Diameter [mm]: 51.9
• Name: BR 14.7257.20
• Manufacturer: BREMBO

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203
• Inner Brake Drum Height [mm]: 51
• Total Br. Drum Height [mm]: 76
• Rim Hole Number: 4
• Wheel Hub Diameter [mm]: 52
• Outer brake drum diameter [mm]: 234
• Bolt Hole Circle Ø [mm]: 100
• Supplementary Article/Info 2: with ABS sensor ring
• Weight [kg]: 5.28
• Number of Teeth, ABS ring: 26
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Construction Year to: 04.2013
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Supplementary Article/Info 2: without wheel bearing
• Inner brake drum diameter [mm]: 180
• Max.skimmed drum measure [mm]: 181
• Inner Brake Drum Height [mm]: 53.5
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size: M12x1,5
• Total Br. Drum Height [mm]: 83
• Outer brake drum diameter [mm]: 208
• Support plate diameter [mm]: 52
• Inner Diameter 2 [mm]: 52.3
• Test Mark: E1 90R-02D0955/0095
• MAPP code available:
• Manufacturer: ATE

• Rim Hole Number: 4
• Width [mm]: 46.7
• Thickness [mm]: 61
• Outer Diameter [mm]: 233.8
• Bolt Hole Circle Ø [mm]: 100
• Max.skimmed drum measure [mm]: 204.45
• Inner brake drum diameter [mm]: 203.3
• Fitting Position: Rear Axle
• Centering Diameter [mm]: 55.4
• Weight [kg]: 5.4
• Name: SW 33 10 3820
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50.5
• Total Br. Drum Height [mm]: 76
• Max.skimmed drum measure [mm]: 204.45
• Centering Diameter [mm]: 49.3
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size 1: M12x1,5
• Supplementary Article/Info 2: with bearing, with ABS sensor ring
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 04.2013
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Inner brake drum diameter [mm]: 203
• Max.skimmed drum measure [mm]: 204.5
• Inner Brake Drum Height [mm]: 48
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size: M12x1,5
• Total Br. Drum Height [mm]: 76
• Outer brake drum diameter [mm]: 234
• Support plate diameter [mm]: 52
• Inner Diameter 2 [mm]: 52.3
• Test Mark: E1 90R-02D0955/0095
• MAPP code available:
• Manufacturer: ATE

• Construction Year to: 12.2016
• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50
• Total Br. Drum Height [mm]: 76
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Outer brake drum diameter [mm]: 234
• Inner brake drum diameter [mm]: 203
• Total Br. Drum Height [mm]: 76
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Stub Axle Diameter [mm]: 25
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Minimum thickness [mm]: 204.45
• Weight [kg]: 5.3
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Construction Year to: 04.2013
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Supplementary Article/Info 2: with wheel bearing, without ABS sensor ring
• Inner brake drum diameter [mm]: 203
• Max.skimmed drum measure [mm]: 204.5
• Inner Brake Drum Height [mm]: 48
• Support plate diameter [mm]: 52
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Thread Size: M12x1,5
• Total Br. Drum Height [mm]: 76
• Outer brake drum diameter [mm]: 234
• Test Mark: E1 90R-02D0955/0095
• MAPP code available:
• Manufacturer: ATE

• Construction Year to: 02.2007
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 50
• Total Br. Drum Height [mm]: 76
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 52
• Supplementary Article/Info 2: without wheel bearing
• Manufacturer: BOSCH

• Construction Year from: 08.2008
• Construction Year to: 12.2016
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203.3
• Outer brake drum diameter [mm]: 234
• Inner Brake Drum Height [mm]: 47
• Total Br. Drum Height [mm]: 76
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Centering Diameter [mm]: 55
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Manufacturer: BOSCH