• Engine Code: K7M 710
• Number of pins: 3
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 21
• Manufacturer: MEAT&DORIA

• Engine Code: K7M 710
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 2
• Connector Shape: rectangular
• Weight [kg]: 0.01
• Outer Diameter [mm]: 17
• Housing Diameter [mm]: 12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Pressure from [kPA]: 20
• Pressure to [kPA]: 10
• Number of pins: 3
• Component Number: 120-08-014
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Intake Manifold
• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: blue
• for article number: 87430E
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• for OE number: 82 00 719 629
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Fabrication Number: ECM-RE-003
• Manufacturer: NTY
• Name: NTY ECM-RE-003

• Number of pins: 2
• Connector Shape: rectangular
• Colour: grey
• for OE number: 1920 1J
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Manufacturer: VERNET
• Additional information: AS0006 VERNET
• Lisainfo: AS0006 VERNET

• Fabrication Number: ECP-RE-010
• Manufacturer: NTY

• Number of pins: 2
• Manufacturer: ERA

• Engine Code: K7M 710
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Required quantity: 1
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA RENAULT CLIO 2,0 16V 00-
• Manufacturer: BRM

• Construction Year to: 10.2013
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV114

• Connector Shape: oval
• Number of pins: 3
• for OE number: 8200 719 629
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• for OE number: 82 00 719 629
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Quantity: 1
• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.52
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: MS0119 VERNET
• Lisainfo: MS0119 VERNET

• Construction Year to: 10.2013
• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 3
• Colour Coding: black
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K7M 710
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Name: OHUSURVEANDUR,
• Manufacturer: MAX

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Housing Colour: black
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Number of pins: 3
• Housing Colour: grey
• Thread Size: M12x1,5
• Manufacturer: FAE

• Alternatively:
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Weight [kg]: 0.014
• Alternative Repair Kit: 550086
• Manufacturer: ERA

• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 82 00 680 689, 22060 00Q0A
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Engine Code: K7M 710
• Required quantity: 1
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Thread Size: M12x1.25
• Spanner Size: 24
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: FAST

• Cable Length [mm]: 350
• Number of pins: 4
• Lambda Sensor: Heated, Thread pre-greased
• Fabrication Number: ESL-RE-003
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

Number of pins: 3

• Engine Code: K7M 710
• Operating voltage [V]: 12
• Number of pins: 3
• Name: Andur,drosselklapiasend
• Manufacturer: MEY

• Construction Year from: 01.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: Front
• Exhaust System: before catalytic converter
• Quantity: 2
• Number of connectors: 4
• Length [mm]: 475
• Manufacturer: VERNET

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Manufacturer: ERA

• Number of connectors: 3
• Weight [kg]: 0.012
• for OE number: 25085-00Q0B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Construction Year to: 11.2006
• Number of pins: 4
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Pressure from [kPA]: 20
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Engine Code: K7M 710
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Construction Year to: 12.2006, 10.2013
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Block Separation:
• Engine Code: K7M 710
• Length [mm]: 470
• Number of circuits: 4
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: K7M 710
• Construction Year to: 12.2006
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 445
• Name: Lambda andur
• Manufacturer: MAX

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Construction Year to: 12.2016
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Block Separation:
• Construction Year from: 12.2006
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: Front
• Exhaust System: after catalytic converter
• Quantity: 1
• Length [mm]: 470
• Number of connectors: 4
• Manufacturer: VERNET

• Required quantity: 1
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PP009400281

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: K7M 710
• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Socket colour: black
• Number of circuits: 4
• Connector Shape: oval
• Cable Length [mm]: 330
• Weight [kg]: 0.121
• for OE number: 96 398 536
• Number of pins: 4
• Length [mm]: 450
• Number of connectors: 4
• Lambda Sensor: Heated, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: K7M 710
• Construction Year from: 12.2006
• Lambda Sensor: Regulating Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• for article number: 81579E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 01.2007
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 280
• Name: DE ES21134-12B1
• Manufacturer: DELPHI

Manufacturer: MAGNETI MARELLI

• Transmission Type: Manual Transmission
• for OE number: 60 01 548 477, 82 00 386 506
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 6
• Connector Shape: rectangular
• Number of mounting bores: 3
• Fabrication Number: EAP-RE-000
• Manufacturer: NTY
• Name: NTY EAP-RE-000

• Engine Code: K7M 710
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 12.2006
• Engine Code: K7M 710
• Voltage [V]: 12
• Length [mm]: 455
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV036
• Manufacturer: ESEN SKV

• Engine Code: K7M 710
• Construction Year to: 11.2006
• Lambda Sensor: Regulating Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 330
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2006
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 395
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Heated
• Model Year to: 2006
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 450
• Weight [kg]: 0.097
• Name: SW 33 10 3192
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: K7M 710
• Construction Year to: 12.2006
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 250
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: EP 1.997.281
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: K7M 710
• Construction Year to: 12.2006
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 470
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.997.594
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Construction Year from: 01.2007
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2006
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: K7M 710
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
TWINGO (C06/), 03.93
(kvaliteediklass: PJ)"

• Construction Year to: 11.2006
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: K7M 710
• Construction Year from: 01.2007
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 300
• Cable Length [mm]: 300
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 12.2006
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 470
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV681
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 450
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year to: 12.2006
• Lambda Sensor: Heated
• Length [mm]: 410
• Number of pins: 4

• Engine Code: K7M 710
• Weight [kg]: 0.028
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Manufacturer: FAE

• for OE number: 8200650085
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: K7M 710
• Construction Year from: 01.2007
• Fitting Position: before catalytic converter
• Required quantity: 2
• Cable Length [mm]: 450
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 10.2013
• Fuel Type: Petrol
• Number of pins: 3
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2016
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Construction Year from: 12.2006
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Construction Year to: 12.2006
• Number of pins: 4
• Lambda Sensor: Heated
• Length [mm]: 415

• Required quantity: 1
• Number of pins: 2
• Tightening Torque [Nm]: 22
• Spanner Size: 24
• Thread Size: M12 x 1,25
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108881
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2006
• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Construction Year from: 01.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 2
• Cable Length [mm]: 365
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 250
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: K7M 710
• Number of pins: 3
• Colour: black
• Manufacturer: VDO

• for OE number: 8200650085
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 525
• Number of pins: 4
• Weight [g]: 88
• Gross Weight [g]: 121
• Manufacturer: DENSO
• Name: DN DOX-2075

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with manual transmission
• Number of pins: 6
• Manufacturer: ERA

• Construction Year to: 11.2010
• Engine Number from: 061205, 140521, 140923
• Engine Number to: 140520, 140922
• Engine Code: K7M.7.10,K7M.8.00, K7M.8.18
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.13
• Manufacturer: VALEO
• Name: VA 368052

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 11.2010
• Engine Code: K7M.7.32
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.134
• Manufacturer: VALEO
• Name: VA 368236

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: K7M 710
• Fitting Position: after catalytic converter
• Production date to: 5.12.2006
• Lambda Sensor: Heated
• Conductor Number: 4
• Cable Length [mm]: 250
• Thread Size: M18 x 1,5
• Manufacturer: PIERBURG