Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Thermoplast
- Length [mm]: 197
- Inner Diameter 1 [mm]: 64
- Inner Diameter 2 [mm]: 15
- for steering gear manufacturer: ZF
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Kaitsekumm,
rooliseade - Manufacturer: MAX
- Engine Code: N47 D20 A
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Fitting Position: both sides
- Quantity per axle: 2
- Bellows Material: Thermoplast
- Inner Diameter 1 [mm]: 15.5
- Inner Diameter 2 [mm]: 64
- Height [mm]: 195
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Manufacturer Restriction: TRW
- for OE number: 32102353823
- Manufacturer: SASIC
-
Fitting Position: Front Axle,
both sides -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Material: Thermoplast
- Length [mm]: 209
- Inner Diameter 1 [mm]: 59
- Inner Diameter 2 [mm]: 16
- for steering gear manufacturer: TRW
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Kaitsekumm - Roolimine BMW E81 116D-123D 04-/E90 316-320 05-
- for steering gear manufacturer: ZF
- Length [mm]: 195
- Material: Thermoplast
- Supplementary Article/Info 2: with clamps
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 16
- Weight [kg]: 0.11
- Inner Diameter 2 [mm]: 64
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekumm - Roolimine BMW E81 116D-130D 04-/E90/91 316-335 05-
- Engine Code: N47 D20 A
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Fitting Position: both sides
- Quantity per axle: 2
- Bellows Material: Thermoplast
- Inner Diameter 1 [mm]: 14
- Inner Diameter 2 [mm]: 60
- Height [mm]: 210
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 210
- Inner Diameter 1 [mm]: 14
- Inner Diameter 2 [mm]: 60
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer Restriction: TRW
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Kaitsekumm - Roolimine BMW E81 116D-123D 04-/E90 316-320 05
-
Fitting Position: Front Axle Left,
Front Axle Right - for steering gear manufacturer: ZF
- Length [mm]: 197
- Inner Diameter 1 [mm]: 64
- Inner Diameter 2 [mm]: 15
- Material: Thermoplast
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Kaitsekumm - Roolimine BMW E81 116D-130D 04-/E90/91 316-335 05-
- for steering gear manufacturer: TRW
- Length [mm]: 210
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Material: Thermoplast
-
Supplementary Article/Info 2: with seal ring,
with clamps -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 14
- Inner Diameter 2 [mm]: 60
- Weight [kg]: 0.081
- Observe service information:
-
Name: Kaitsekummikomplekt,
rooliseade - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 195
- Inner Diameter 1 [mm]: 16
- Inner Diameter 2 [mm]: 64
- Material: Thermoplast
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer Restriction: ZF
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Kaitsekumm - Roolimine BMW E81 116D-130D 04-/E90/91 316-335 05-
- Manufacturer Restriction: TRW
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.07
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter 1 [mm]: 13
- Inner Diameter 2 [mm]: 62
- Height [mm]: 210
- Manufacturer: AUTOFREN SEINSA
- Material: Thermoplast
- Manufacturer Restriction: TRW
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 14
- Outer Diameter 1 [mm]: 60
- Length 1 [mm]: 210
- Inner Diameter 2 [mm]: 14
- Outer Diameter 2 [mm]: 60
- Length 2 [mm]: 210
- Manufacturer: DELPHI
- Material: Thermoplast
- Manufacturer Restriction: ZF
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 16
- Outer Diameter 1 [mm]: 64
- Length 1 [mm]: 195
- Inner Diameter 2 [mm]: 16
- Outer Diameter 2 [mm]: 64
- Length 2 [mm]: 195
- Manufacturer: DELPHI
- Name: DE TBR4200
- Manufacturer Restriction: TRW
-
Fitting Position: Front Axle Left,
Front Axle Right -
Lisainfo: Bellow,
steering -
Additional information: Bellow,
steering
- Height [mm]: 197
- Inner Diameter 1 [mm]: 15
- Inner Diameter 2 [mm]: 64
- Fitting Position: Front Axle both sides
- Material: Plastic
- Weight [kg]: 0.07
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter 1 [mm]: 13
- Inner Diameter 2 [mm]: 60
- Height [mm]: 214
-
Fitting Position: Front Axle Right,
Front Axle Left - Full Set:
-
Name: SE D9-
021C - Manufacturer: AUTOFREN SEINSA
-
Fitting Position: Front Axle Left,
Front Axle Right - for steering gear manufacturer: TRW
- Supplementary Article/Supplementary Info: with accessories
- Height [mm]: 210
- Inner Diameter 1 [mm]: 14.5
- Inner Diameter 2 [mm]: 59
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks