• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Fitting Position: before soot particulate filter
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: NRF

• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Manufacturer: SWAG
• Name: SW 20 94 7155

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N47 D20 A
• Construction Year from: 09.2008
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 13627808013
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: N47 D20 A
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Construction Year to: 09.2008
• Number of connectors: 3
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Name: HU 137417

• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Weight [kg]: 0.13
• Warranty: 3 years warranty
• Name: CE 17SKV665
• Manufacturer: ESEN SKV

• Number of pins: 3
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D, 118D, X6 XDRIVE 40D 04-

• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE DPS00004

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Measuring Range from [kPa]: 90
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.95
• Measuring Range to [V]: 4.52
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N47 D20 A
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Engine Code: N47 D20 C
• Number of connectors: 2
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N47 D20 A
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Thread Size: M12x1.25
• Number of pins: 2
• Fabrication Number: EGT-BM-004
• Cable Length [mm]: 375
• Manufacturer: NTY

• Number of pins: 3
• Pressure [Pa] from: 42,000
• Pressure [Pa] to: 502,000
• Manufacturer: FAE

• Cable Length [mm]: 590
• Number of pins: 2
• Warranty: 3 years warranty
• Name: CE 30SKV448
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Construction Year to: 09.2008
• Number of pins: 3
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 370
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before exhaust turbocharger
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.07
• Operating Mode: Electric
• Name: CE 30SKV104
• Manufacturer: ESEN SKV

• Engine Code: N47 D20 C
• Trim Level: Blue Performance
• for facelift:
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• for OE number: 13 62 7 805 606
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Warranty: 3 years warranty
• Exhaust System: after soot particulate filter
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Manufacturer: SKV GERMANY
• Name: CE 30SKV399

• Fitting Position: before soot particulate filter
• Emission Standard: Euro 4
• Number of pins: 2
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

Manufacturer: MAGNETI MARELLI

• for facelift:
• Engine Code: N47 D20 C
• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.14
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 375
• Overall Length [mm]: 495
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Shape: straight
• Number of pins: 2
• Connector Shape: oval
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Fitting Position: after soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Lambda Sensor: Regulating Probe, Heated
• Length [mm]: 420
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 420
• Manufacturer: MAGNETI MARELLI

• Emission Standard: Euro 4
• Exhaust System: before soot particulate filter
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 13 62 7 806 254
• Temperature range from [°C]: -40
• Temperature range to [°C]: 1,000
• Sensor Type: NTC Sensor
• Socket colour: black
• Weight [kg]: 0.1
• Thread Size: M12 X 1,25
• Overall Length [mm]: 485
• Shape: straight
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 370
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 395
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 35
• Connecting thread: M12x1,25
• Alternative Repair Kit: 551148
• Manufacturer: ERA

• Fitting Position: Particulate Filter
• for OE number: 13627806254, 7806254
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Temperature range [°C]: -40, 800
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 38
• Name: Andur, heitgaasitemperatuur
• Manufacturer: DEN

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for article number: 81577E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: N47 D20 C
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: AM
• Manufacturer: METZGER

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N47 D20 A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Fitting Position: after soot particulate filter
• Construction Year from: 09.2008
• Number of pins: 2
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Lambda Sensor: Broadband lambda sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: N47D20C
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO
• Name: VA 368397

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N47 D20 C
• Trim Level: Blue Performance
• Country Specific Design: India, Thailand, Malaysia
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 5
• Connector Shape: D Shape
• Length [mm]: 700
• Alternatively:
• Number of pins: 5
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N47 D20 C
• for OE number: 13 62 7 794 634, 7 794 634
• Country Specific Design: Europe, India, Malaysia, Thailand
• Block Separation:
• Trim Level: Blue Performance
• Fitting Position: after catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 700
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE