• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front
• Material: Rubber/Metal
• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Control/Trailing Arm Type: for trailing arm
• Manufacturer: MERTZ

• Block Separation:
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 48
• Manufacturer: DELPHI
• Name: DE TD1616W

Fitting Position: Rear Axle, Lower, in front of axle, inner, Axle beam, Steering Knuckle, wheel suspension, outer

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Fitting Position: both sides, Rear Axle, inner
• Axle alignment required after fitting:
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46.5
• for OE number: 33326763092
• Manufacturer: SASIC

• Fitting Position: Rear Axle Middle, outer
• Weight [kg]: 0.288
• Packaging length [cm]: 4.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides, inner, Lower
• Required quantity: 2
• paired article number: VKDS 438513
• Length [mm]: 48
• Height [mm]: 46.3
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 46.3
• Name: SK VKDS438513
• Manufacturer: SKF

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Centre
• Width [mm]: 55
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Manufacturer: MERTZ

• Fitting Position: Front Axle, both sides, Rear, inner
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 46
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik BMW P. E87/90 TYLN
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.25
• Name: DY 37-25508
• Manufacturer: DYS

• Fitting Position: Rear Axle Upper, both sides, inner
• Control/Trailing Arm Type: for semi-trailing arm
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Jämedus/Tugevus (mm): 50
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 45
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, väljas
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,24
• Name: Puks - K„„ndmik BMW T. E87/90 LE/PR ZEWN.
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 71
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 46, 23
• Installatsiooni pool: esisild vasakul, all, taga, esisild paremal
• Kaal (kg): 0,252
• Name: Puks - K„„ndmik BMW P. E87/90 TYLN
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.261
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• for OE number: 33326765534
• Manufacturer: SASIC

• Jämedus/Tugevus (mm): 48
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 45, 26
• Installatsiooni pool: Tagasild vasakul, üleval, taga, Tagasild paremal
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,232
• Name: Puks - K„„ndmik BMW T. E81/82/87/90 03- LE/PR
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 48
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 46
• Materjal: Kumm/metall
• Roolimisliik: für Längslenker
• Installatsiooni pool: Tagasild vasakul, all, ees, Tagasild paremal
• Kuju: piludega
• Kaal (kg): 0,112
• Name: PUKS
• Manufacturer: FEB
• Additional information: FE32037
• Lisainfo: FE32037

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides, Lower
• Outer Diameter [mm]: 47.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Material: Rubber/Metal
• Control/Trailing Arm Type: for trailing arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Shape: slotted
• Weight [kg]: 0.112
• Manufacturer: SWAG
• Name: SW 20 93 2037

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45, 26
• Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.261
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, inner, Upper
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 45
• Thickness 1 [mm]: 48
• Name: DE TD1125W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Upper, Front, outer, Centre, inner
• Block Separation:
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 50
• Width 2 [mm]: 33
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear, inner, Lower, Front Axle both sides
• Required quantity: 2
• Rod/Strut: for pull rod
• paired article number: VKDS 338543
• Name: SK VKDS338543
• Manufacturer: SKF

• Fitting Position: Rear Axle, outer, Upper
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 45
• Thickness 1 [mm]: 50
• Manufacturer: DELPHI
• Name: DE TD1124W

• Block Separation:
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik BMW T. E87/90 LE/PR ZEWN.
• Manufacturer: LMI

Fitting Position: Rear Axle, Upper, both sides, Front, outer, Centre, inner SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Rear, inner, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Rear, inner, outer
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.5
• Width 1 [mm]: 25
• Width 2 [mm]: 48
• SVHC: No SVHC present!
• Name: LU 829057610
• Manufacturer: FAG

• Fitting Position: Rear Axle both sides, Upper, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Height [mm]: 48
• Name: ALT 87737AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Upper, both sides, Front, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik BMW T. E81/82/87/90 03- LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, Rear, inner
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Length [mm]: 71
• Outer Diameter [mm]: 46
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik BMW P. E87/90 03- TYLNA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear, outer
• Name: Puks - K„„ndmik BMW T. E81/88/90 04- LE/PR TYLNA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: both sides, Rear Axle, Upper, inner, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 4
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik BMW T.
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Height [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik BMW T. E87/90 LE/PR ZEWN.
• Manufacturer: MEY

Fitting Position: outer, Upper, Rear Axle Right, Rear Axle Left, Rear

• Fitting Position: outer, Rear Axle both sides, Lower
• Required quantity: 2
• Rod/Strut: for suspension rod
• paired article number: VKDS 438511
• Height [mm]: 53.9
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 47.3
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Net weight [kg]: 0.34
• Name: Paigutus - K„„ndmik BMW T. E87/90 14X47X55 TYLNA
• Manufacturer: NK

• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Height [mm]: 71
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik BMW P. E87/90 TYLN
• Manufacturer: MEY

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• for OE number: Part of 33326777980
• paired article number: 2256090
• Manufacturer: SASIC

• Trim Level: EXC. XI - XD
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Lower, outer, both sides
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: Puks
• Manufacturer: TED

• Fitting Position: Rear Axle, Upper, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear Axle Lower, both sides, inner
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, Left, Right
• Required quantity: 2
• Name: COC 49402166
• Manufacturer: CORTECO

• Fitting Position: inner, Upper, Rear Axle Right, Rear Axle Left
• Height [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik BMW T. E81/82/87/90 03- LE/PR
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Hydro Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Rear Axle both sides, inner
• Required quantity: 2
• Rod/Strut: for camber strut
• paired article number: VKDS 438512
• Name: SK VKDS438512
• Manufacturer: SKF

• Fitting Position: Front Axle, Lower, Front
• Mounting Type: Hydro Mount
• Thickness [mm]: 76, 65
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik BMW P. E87/90 PRZE
• Manufacturer: MAX

• Height [mm]: 48
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 45
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik BMW T. E87/90
• Manufacturer: MEY

Fitting Position: inner, Upper, Rear Axle Right, Rear Axle Left, Rear

• Fitting Position: Rear Axle Lower, Rear, inner
• Weight [kg]: 0.29
• Packaging length [cm]: 6.6
• Packaging width [cm]: 5.3
• Packaging height [cm]: 5.3
• Manufacturer: FEBEST

• Laius (mm): 55
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 47,3
• Installatsiooni pool: Tagasild vasakul, all, kese, Tagasild paremal
• Kaal (kg): 0,36
• Name: Paigutus - K„„ndmik BMW T. E87/90 14X47X55 TYLNA
• Manufacturer: FEB
• Additional information: F26643
• Lisainfo: F26643

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 70
• Thickness 1 [mm]: 76
• Manufacturer: DELPHI
• Name: DE TD861W

• Width [mm]: 55
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47.3
• Fitting Position: Rear Axle Left, Lower, Centre, Rear Axle Right
• Weight [kg]: 0.36
• Manufacturer: SWAG
• Name: SW 20 92 6643
• Lisainfo: 20 92 6643 SWA
• Additional information: 20 92 6643 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, both sides, Front, inner
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. E81/87/90/91 05-
• Manufacturer: MAX

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Height [mm]: 54
• Name: ALT 84945AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Height [mm]: 76
• Name: ALT 89062AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Upper, outer, both sides
• Control/Trailing Arm Type: for control arm, for semi-trailing arm
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 45
• Thickness 1 [mm]: 48
• Manufacturer: DELPHI
• Name: DE TD1700W

• Jämedus/Tugevus (mm): 76
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 70
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, ees, esisild paremal
• Laagritüüp: Hüdrolaager
• Kaal (kg): 0,494
• Name: Puks
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Trim Level: EXC. XI - XD
• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
BMW 1 E87 '04-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle
• Weight [kg]: 0.502
• Height 1 [mm]: 65
• Height 2 [mm]: 76
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 502
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Height [mm]: 55
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear Axle Middle, inner
• Weight [kg]: 0.31
• Packaging length [cm]: 4.8
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: PU (Polyurethane)
• Required quantity: 8
• Supplementary Article/Info 2: with grease cap, with mounting manual
• Manufacturer: TEDGUM

Fitting Position: Rear Axle, Lower, Front, Rear, inner, outer, both sides

• Fitting Position: Front Axle, both sides, Front, inner
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. E81/87/90/91 05-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: inner, Lower Front Axle, Front
• Weight [kg]: 0.561
• Mounting Type: Hydro Mount
• Packaging length [cm]: 7.6
• Packaging width [cm]: 7
• Packaging height [cm]: 7
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Upper, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: PU (Polyurethane)
• Required quantity: 2
• Supplementary Article/Info 2: with grease cap, with mounting manual
• Manufacturer: TEDGUM
• Name: TG TED11278

• Fitting Position: Rear Axle, Lower, inner, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: PU (Polyurethane)
• Required quantity: 2
• Supplementary Article/Info 2: with grease cap, with mounting manual
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle Upper, both sides, inner
• Control/Trailing Arm Type: for semi-trailing arm
• Material: PU (Polyurethane)
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle Upper, outer, both sides
• Control/Trailing Arm Type: for control arm, for semi-trailing arm
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG