Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 22
-
External Thread [mm]: M14 x 1,
5 - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Length [mm]: 28
- Outer Diameter [mm]: 33
-
External Thread Size: M26 x 1,
5 - Thread Length [mm]: 13
- Quality/ Grade: 5.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 16
- Weight [kg]: 0.078
- Supplementary Article/Info 2: without seal ring
- Manufacturer: SWAG
- Name: SW 32 91 9294
- Lisainfo: 32 91 9294 SWA
- Additional information: 32 91 9294 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 2
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 31
- Material: Copper
- Weight [kg]: 0.002
- Observe dimensions:
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 2
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 31
- Material: Copper
- Weight [kg]: 0.002
- Observe dimensions:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.04
- Thread Size: M14x150
- Bolt/Nut Version: with plain washer
- Manufacturer: METALCAUCHO
-
Bolt/Nut Version: Prevent-
loss disc - Thread Size: M 14
- Thread Length [mm]: 22
- Thread Pitch [mm]: 1.5
- Overall Length [mm]: 30
- Material: Steel
-
Surface: Zink-
nickel coated - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19
-
Name: Sulgurkruvi,
olivann - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5 - Length [mm]: 22
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- Length [mm]: 24
-
Thread Size: M14x1,
5 - Material: Steel
- Supplementary Article/Info 2: with seal ring
- Manufacturer: DELLO AUTOMEGA
- Length [mm]: 30
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 18
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 22
-
Thread Size: M14 x 1,
50 - Manufacturer: 3RG
-
Thread Size: M14x1,
5x22 - Spanner Size: 19 mm
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
-
Vehicle Identification Number (VIN) to: 8D-
X- 200 000 -
Thread Size: M24x1,
5 - Length [mm]: 11
- Additionally required articles (article numbers): 624.590.100
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
- for OE number: N 908 132 02
-
Thread Size: M14 x 1,
5 - Manufacturer: TRUCKTEC
- Length [mm]: 29.5
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 17.5
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.083
- Thread Size: 26x150
- Weight [g]: 82
- Manufacturer: METALCAUCHO
- Length [mm]: 29.5
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 17.5
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 22
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 8D-
X- 200 000 -
Thread Size: M24x1,
5 - Length [mm]: 11
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FIS
-
Thread Size: M14x1,
5x22 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19 mm
- Alternative Repair Kit: 505.540
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
-
External Thread [mm]: M14 x 1,
5 - Required quantity: 1
- Bolt Head-/Nut Design: Hexagon Socket
- Thread Pitch [mm]: 1.5
- for OE number: N 016 027 6
- Fitting Position: engine sided
-
Thread Size: M14 x 1,
5 - Bolt/Nut Version: Flat Head
- Material: Steel
- Thread Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.018
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: -
8D- X- 200 000 - Length [mm]: 14
-
Thread Size: M 24 x 1,
50 x 10 - Spanner Size: 10
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Name: COU 220132S
- Lisainfo: 220132S CORTECO
- Additional information: 220132S CORTECO
-
External Thread [mm]: M14 x 1,
5 - Supplementary Article/Info 2: with seal ring
- Length [mm]: 29.5
-
Thread Size: M14 x 1,
5 - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
-
Surface: Zink-
nickel coated -
Bolt/Nut Version: Prevent-
loss disc - Thread Length [mm]: 22
- Required quantity: 1
- Material: Steel
- Thread Pitch [mm]: 1.5
- for OE number: N 908 132 02
- Fitting Position: engine sided
- Weight [kg]: 0.064
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 28
- Outer Diameter [mm]: 33
-
External Thread Size: M26 x 1,
5 - Thread Length [mm]: 13
- Quality/ Grade: 5.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 16
- Weight [kg]: 0.078
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 8D-
X- 260 001- - Length [mm]: 29.5
-
Thread Size: M 14 x 1,
50 x 22 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Name: COU 220125S
-
Thread Size: M 26x1,
5 - Bolt Head-/Nut Design: Male Hex
-
Thread Size: M26 x 1,
5 - Length [mm]: 16
- Spanner Size: 17
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Steel
-
Thread Size: M14x1,
5 - Length [mm]: 30
- Screw length below head [mm]: 22
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19
- Seal Material: Steel
- Packing Type: Box
- Quantity: 10
- Alternative Repair Kit: 8030043
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks