• Fabrication Number: ECT-AU-010
• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: blue
• Outer Diameter [mm]: 25.5
• Inner Diameter [mm]: 20
• for OE number: 025 906 041 A, 95VW-12A648-BA, A 002 542 07 18
• Manufacturer: MEAT&DORIA

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: rectangular
• Colour: black
• for OE number: 058905379
• Manufacturer: DELLO AUTOMEGA

Manufacturer: MAGNETI MARELLI

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 3
• Socket colour: blue
• Fabrication Number: ESS-AU-001
• Manufacturer: NTY

• Quantity: 1
• Number of pins: 2
• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: AJL
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• for OE number: 058 905 379
• Manufacturer: TRUCKTEC

• Number of pins: 3
• Socket colour: green
• Fabrication Number: ESS-AU-000
• Manufacturer: NTY

• Engine Code: AJL
• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 8D_Y_000001
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-AU-003
• Manufacturer: NTY

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 730
• Manufacturer: KAMOKA

• Sensor Type: Active sensor
• for OE number: 058 905 161 B
• Manufacturer: KAMOKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV326
• Manufacturer: ESEN SKV

• Cable Length [mm]: 520
• Number of pins: 3
• Colour: blue, black
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: rectangular
• Number of pins: 2
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 6 GF 30
• Sensor Type: NTC Sensor
• Number of mounting bores: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10491

• Engine Code: AJL
• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 800
• Manufacturer: MEAT&DORIA

• Thread Size: 12 mm
• Manufacturer: CALORSTAT BY VERNET

• Engine Code: AJL
• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 8D_X_500000
• Colour: blue
• Corresponds to the original part in colour: blue
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of connectors: 2
• Weight [kg]: 0.015
• for OE number: 058 905 379
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AJL
• Housing Colour: green
• Cable Length [mm]: 800
• Name: DETONATSIOONIANDUR
• Manufacturer: MAX

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Number of pins: 3
• Fabrication Number: ESS-AU-006
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• for OE number: 058905161B
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 550
• for OE number: 054 905 377 G, 480EE-1002060
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Diameter [mm]: 90
• Length [mm]: 835
• Height [mm]: 37
• General Information: knock sensor
• Manufacturer: VIKA

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 8DX500000
• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 3
• Name: Andur,steimpulss
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 8D-X-500000
• Number of pins: 4
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Cable Length [mm]: 520
• Number of pins: 3
• Weight [kg]: 0.08
• Manufacturer: ERA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009109181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 535
• Number of pins: 3
• Housing Colour: blue
• Lisainfo: Knock sensor
• Additional information: Knock sensor

• Number of pins: 3
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 8D-Y-000001
• Number of pins: 4
• Housing Colour: black
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW GOLF 1,8 97-
• Manufacturer: BRM

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Voltage [V]: 12
• Number of pins: 3
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 743
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fabrication Number: EPP-AU-008
• Manufacturer: NTY

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: BOS

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012681021
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Cable Length [mm]: 460
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE AS10186

• Number of connectors: 3
• Cable Length [mm]: 570
• Weight [kg]: 0.068
• Name: SW 33 10 3001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Colour: blue
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Number of connectors: 3
• Cable Length [mm]: 570
• Weight [kg]: 0.068
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: green
• Manufacturer: BOSCH

• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 540
• Number of pins: 3
• Name: Detonatsiooniandur
• Manufacturer: MEY

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Lambda Sensor: Regulating Probe, Finger probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Engine Code: AJL
• Colour: blue
• Cable Length [mm]: 540
• Number of pins: 3
• Weight [kg]: 0.105
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 98VW-12B529-BA
• Manufacturer: KAMOKA

• Cable Length [mm]: 550
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Construction Year from: 02.1999
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Manufacturer: VALEO

• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 740
• Manufacturer: DELPHI
• Name: DE ES10568-12B1

• Lambda Sensor: Regulating Probe
• Engine Code: AJL
• Voltage [V]: 12
• Length [mm]: 1,440
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV079

• Construction Year to: 07.1998
• Vehicle Identification Number (VIN) from: w-000 001
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Number of pins: 4
• Housing Type: with housing
• Lisainfo: Air meter
• Additional information: Air meter

• Vehicle Identification Number (VIN) from: 8D-W-040 001
• Manufacturer: DELLO AUTOMEGA

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.33
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV014

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

• Engine Code: AJL
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 8D-W-040001
• Housing Type: with housing
• Number of pins: 4
• Housing material: Plastic
• Connector Shape: rectangular
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN
• Lisainfo: 109 391 HP
• Additional information: 109 391 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,370
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM