• Vehicle Identification Number (VIN) from: 8D-X-200 001
• for PR number: 1BV
• Suspension: for vehicles with sports suspension
• Fitting Position: Upper, Rear, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, inner, Lower, Upper, Front, Rear
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.1

• Fitting Position: inner, Front Axle, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI A4 AVANT / QUATTRO
• Additional information: AUDI A4 AVANT / QUATTRO

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Article number of recommended accessories: 39430 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSAT 97-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• not for PR number: 1BV
• Suspension: for vehicles without sports suspension
• Lisainfo: Bolts, nuts and washer for JP item no. 1140100210
• Additional information: Bolts, nuts and washer for JP item no. 1140100210

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper Front Axle, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 8D-W-260129
• Fitting Position: Front Axle Left, Front Axle Right, Upper, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Outer Diameter [mm]: 46
• Inner Diameter [mm]: 10
• Width [mm]: 26
• Axle alignment required after fitting:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower Front Axle, Front, outer
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, outer
• Additional information: Rubber mount for wishbone, front, outer

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Stabilizer link mount left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Material: Rubber/Metal
• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

Lisainfo: Rubber mount for wishbone, front

• Vehicle Identification Number (VIN) to: 8D-W-260 129
• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Fitting Position: inner, Upper, Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.118
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 8D-W-260130
• for PR number: 1BA, 1BB, 1BC, 1BE, 1BP, 1BQ, 1BT
• Fitting Position: Front Axle Left, Front Axle Right, Upper, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 50
• Inner Diameter [mm]: 12
• Width [mm]: 31
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Suspension: for vehicles with sports suspension
• Construction Year from: 02.1999
• for PR number: 1BV
• Fitting Position: Front Axle Left, Front Axle Right, Upper, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Outer Diameter [mm]: 46
• Inner Diameter [mm]: 10
• Width [mm]: 26
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.07
• Name: DY 37-06034-5
• Manufacturer: DYS

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Manufacturer: DELPHI
• Name: DE TD437W

• Vehicle Identification Number (VIN) to: 8D-W-260 129
• Fitting Position: Upper, inner, Right, Left, Front Axle
• Inner Diameter [mm]: 10.2
• Outer Diameter [mm]: 46.5
• Weight [kg]: 0.07
• Manufacturer: CORTECO
• Name: COC 21652949

• Diameter [mm]: 46
• Mounting Type: Rubber-Metal Mount
• Height [mm]: 40
• Axle alignment required after fitting:
• Fitting Position: both sides, inner, Upper Front Axle
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.103
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower Front Axle
• Fabrication Number: ZTP-AU-005A

• Length [mm]: 60
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Width [mm]: 42
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Name: DY 37-06046-6
• Manufacturer: DYS

• Fitting Position: Front Axle, Front, outer, Right, Left
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 40.3
• Weight [kg]: 0.09
• Name: COC 21652796
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) to: 8D-W-260 129
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Weight [kg]: 0.078
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Width [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009810

• Fitting Position: Front Axle, Lower, Front, outer, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A4/A6/A8/PASSAT 97- DOLNA
• Manufacturer: MAX

• Quantity: 2
• Fitting Position: Front Axle, Front, Lower Front Axle, outer
• Material: Rubber/Metal
• Thickness [mm]: 49
• Weight [kg]: 0.095
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• General Information: control arm bush
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Suspension: for vehicles with lowered suspension
• for PR number: 1BV
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 50
• Name: DE TD441W
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) to: 8D-W-260 129
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 23
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Weight [kg]: 0.075
• Manufacturer: SWAG
• Name: SW 30 60 0029

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Front, outer, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Length from [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Suspension: for vehicles with lowered suspension
• for PR number: 1BV
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Name: SW 32 93 0696
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Suspension: for vehicles with lowered suspension
• Thickness [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 46
• Outer Diameter 2 [mm]: 47
• Inner Diameter 1 [mm]: 10
• Manufacturer: BGA

Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right

• for PR number: 1BV
• Vehicle Identification Number (VIN) from: 8D-X-200001
• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A4/A6/A8 LE/PR PRZEDNIA
• Manufacturer: MAX

• Fitting Position: Upper, Front Axle
• Manufacturer: GSP

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Upper, both sides, Front, Rear, inner
• Length [mm]: 40
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.4
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Manufacturer: DELLO AUTOMEGA

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.095
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/A6/A8
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.08
• Height 1 [mm]: 26
• Height 2 [mm]: 39.8
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.4
• Control/Trailing Arm Type: Control Arm
• Weight [g]: 80
• Manufacturer: METALCAUCHO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4 94- QUATTRO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4 94- QUATTRO
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle both sides, Upper
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 33
• Name: ALT 80928AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Width 1 [mm]: 32
• Width 2 [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009710

• Outer Diameter 1 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 50
• Manufacturer: BGA

Fitting Position: outer, Lower, Front, Front Axle Left, Front Axle Right

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, inner
• Additional information: Rubber mount for wishbone, front, inner

• Fitting Position: Front Axle, Lower, Front, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 50
• Name: ALT 80989AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.092
• Observe service information:
• Name: SW 32 69 0003
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 60 0031

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front, inner, Right, Left
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.2
• Weight [kg]: 0.2
• Manufacturer: CORTECO
• Name: COC 21652815

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 50
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD440W

• Fitting Position: Front Axle both sides, Front, Lower, outer
• Required quantity: 2
• paired article number: VKDS 331012
• Height [mm]: 50
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.2
• Name: SK VKDS331012
• Manufacturer: SKF

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 50
• Length [mm]: 60
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.19
• Manufacturer: NK

Name: Puks - K„„ndmik VW P. A4/PASSAT 97- DOLNEGO LE/PR (PRO)

• Quantity: 4
• Fitting Position: Front Axle, inner, Upper Front Axle
• Material: Rubber/Metal
• Thickness [mm]: 40
• Weight [kg]: 0.078
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• General Information: control arm bush
• Manufacturer: VIKA

• Quantity: 2
• Material: Rubber/Metal
• Length [mm]: 60
• Weight [kg]: 0.202
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• General Information: control arm bush
• Manufacturer: VIKA

Fitting Position: Front Axle, inner, Front, Front Axle both sides, Lower

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Rear, inner, Upper, Front, Front Axle both sides
• Required quantity: 4
• paired article number: VKDS 331021
• Name: SK VKDS331021
• Manufacturer: SKF

• Fitting Position: Lower, inner, Front
• Material: Rubber/Metal
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.22
• Name: DY 37-06046-5
• Manufacturer: DYS

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Name: Puks - K„„ndmik VW P. A4/A6/A8 97-
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• for OE number: 4D0 407 182 E
• Fitting Position: Lower Front Axle
• Manufacturer: GSP

• Height [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Name: Puks - K„„ndmik VW P. A4/A6/A8
• Manufacturer: MEY

Fitting Position: outer, Front, Lower, Front Axle Left, Front Axle Right General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle, Lower, Front, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24
• Height [mm]: 60
• Name: ALT 80990AL
• Manufacturer: ALTE AUTOMOTIVE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Model Year from: 1998
• Model Year to: 1999
• Fitting Position: Front, Rear, Upper Front Axle, outer
• Weight [kg]: 0.135
• Packaging length [cm]: 4.6
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN) from: 8D-W-260 130
• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Quantity per axle: 4
• Name: Puks - K„„ndmik VW P. A4/PASSAT 01-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Height [mm]: 60
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 50
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: MEY