Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 2
- Number of Teeth 1: 153
- Manufacturer: SNR
- Name: SN KD457.22
- Additional information: KD457.22 SNR
- Lisainfo: KD457.22 SNR
Vehicle Identification Number (VIN): [;8D-T-155-000], [;8D-T-155000], [8D-T-155-001;], [8D-T-155001;]
-
Engine Code: APU,
ANB, AEB - Block Separation:
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 001 - Width [mm]: 25
- Number of Teeth: 153
- Weight [kg]: 1.027
-
Units/Pulleys: incl. tensioner pulley,
incl. deflection pulley - for OE number: 058 198 119
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
- Trim Level: AEB
- for OE number: 058198119
- Number of Teeth: 153
- Width [mm]: 25
-
Length [mm]: 1,
224 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.1
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
-
Engine Code: AEB,
ANB, APU, ARK -
Vehicle Identification Number (VIN) from: 8D-
T- 155 010 - Block Separation:
- Engine Number from: 020 001
- Alternatively:
- Number of Teeth 1: 153
- Width 1 [mm]: 25
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Construction Year to: 09.2001
- Driven Units: Camshaft
-
Engine Code: AEB,
ANB, APU, ARK - Supplementary Article/Info 2: without tensioner pulley damper
-
Article number of the recommended special tool: GAT4740,
GAT4844, GAT4741 - Observe technical data:
- Name: Hammasrihma komplekt
- Manufacturer: GAT
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 001 - Engine Code: AEB
- Belt Width [mm]: 25
- Colour: black
- Number of Teeth: 153
- Belts: with rounded tooth profile
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKMA 01008 SKF
- Additional information: VKMA 01008 SKF
- Number of belts: 1
- Number of track rollers: 2
- Width 1 [mm]: 23
- Number of Teeth 1: 150
- Manufacturer: SNR
- Name: SN KD457.33
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Alternatively:
- Number of Teeth 1: 150
- Width 1 [mm]: 23
- Supplementary Article/Info 2: without tensioner pulley damper
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Number of belts: 1
- Number of track rollers: 2
- Width 1 [mm]: 23
- Number of Teeth 1: 150
- Manufacturer: SNR
- Name: SN KD457.45
- Driven Units: Camshaft
-
Trim Level: >0700 ,
AWT - for OE number: 06B198119
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.1
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Driven Units: Camshaft
-
Trim Level: 0800> ,
AWT - for OE number: 06B198119A
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.1
- Tensioner Pulley Actuation: Hydraulic
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Engine Code: AWT
- Width [mm]: 23
- Number of Teeth: 150
- Supplementary Article/Info 2: with screw
- Weight [kg]: 1.1
-
Units/Pulleys: incl. tensioner pulley,
incl. deflection pulley - for OE number: 06B 198 119 A
- Observe service information:
- Name: SW 32 92 4755
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Engine Code: AWT
- Belt Width [mm]: 23
- Colour: black
- Number of Teeth: 150
- Belts: with rounded tooth profile
- Manufacturer: SKF
- Name: SK VKMA01136
- Driven Units: Camshaft
-
Engine Code: ARK,
APU, ANB, AEB - Block Separation:
- Engine Number from: 020 001
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 010 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.21
- Number of Teeth: 153
- Width [mm]: 25
- Supplementary Article/Info 2: without tensioner pulley damper
- Alternatively:
- Pulleys contained: 2
- Tensioner Pulley Actuation: Hydraulic
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
Technical Information: According to VW AG, there can be deviations in the assignmen, t of chassis numbers.
- Construction Year to: 09.2001
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Supplementary Article/Info 2: without tensioner pulley damper
-
Article number of the recommended special tool: GAT4840A,
GAT4844, GAT4741 - Observe technical data:
- Name: Hammasrihma komplekt
- Manufacturer: GAT
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Width [mm]: 23
- Number of Teeth: 150
- Surface: Coated
- Weight [kg]: 0.713
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AWT
- Vehicle Identification Number (VIN) to: ******8D*1*042384
- Width [mm]: 23
- Number of Teeth: 150
- Weight [kg]: 1.311
- Units/Pulleys: incl. tensioner pulley
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - for OE number: 06B 109 119 F S4
- Observe service information:
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AEB,
ANB, APU - Construction Year to: 07.1998
- Block Separation:
- Vehicle Identification Number (VIN) from: 8D..T..155 010
- Construction Year from: 08.1998
- Number of Teeth: 153
-
Length [mm]: 1,
224 - Width [mm]: 25
- Tooth Pitch [mm]: 8
- Number of track rollers: 2
- Supplementary Article/Info 2: without tensioner element
- Manufacturer: BOSCH
Vehicle Equipment: for vehicles without converted timing belt kit, for vehicles with converted timing belt kit
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.16
- Number of Teeth: 150
- Width [mm]: 23
- Supplementary Article/Info 2: without tensioner pulley damper
- Pulleys contained: 2
-
Technical Information: Please note:
Technical Info in the attachment - Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
- Engine Code: AWT
- Construction Year from: 08.2000
- Vehicle Identification Number (VIN) from: 8D..1..042 385
- Number of Teeth: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Number of track rollers: 2
- Supplementary Article/Info 2: without tensioner element
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: BOS
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 7
- Weight [kg]: 1.14
- Number of Teeth: 150
- Width [mm]: 23
- Supplementary Article/Info 2: without tensioner pulley damper
- Alternatively:
- Tensioner Pulley Actuation: Hydraulic
- Technical Information: Kit for reuse of the existing hydraulic damper
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Engine Code: AWT
- Number of Teeth 1: 150
- Width 1 [mm]: 23
- Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Number of Teeth 1: 150
- Width 1 [mm]: 23
- Supplementary Article/Info 2: with tensioner pulley damper
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Driven Units: Camshaft
- Trim Level: AWT AWT
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.4
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Construction Year from: 01.2000
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Engine Code: AWT
- Width [mm]: 23.2
- Belt Width [mm]: 23
- Colour: black
- Supplementary Article/Info 2: with tensioner pulley damper
- Number of Teeth: 150
- Belts: with rounded tooth profile
- Manufacturer: SKF
- Name: SK VKMA01936
- Engine Code: AWT
- Number of Teeth: 150
- Weight [kg]: 1.86
- for OE number: 06B 198 119 A S1
- Supplementary Article/Supplementary Info: with water pump
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Engine Code: AWT
- Belt Width [mm]: 23
- Colour: black
- Number of Teeth: 150
- Belts: with rounded tooth profile
- Manufacturer: SKF
- Name: SK VKMA01170
- Driven Units: Camshaft
- Trim Level: Ch 1 042 385>
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.1
- Tensioner Pulley Actuation: Mechanical
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Driven Units: Camshaft
- Trim Level: AWT AWT
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 0.8
- Manufacturer: DAYCO
- Construction Year to: 09.2001
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Supplementary Article/Info 2: with tensioner pulley damper
-
Article number of the recommended special tool: GAT4840A,
GAT4844, GAT4741 - Observe technical data:
- Name: Hammasrihma komplekt
- Manufacturer: GAT
-
Vehicle type: W/
O DAMPER - Number of belts: 1
- Weight [kg]: 2.18
-
Name: AI WPK-
937703 - Manufacturer: AIRTEX
-
Engine Code: AEB,
ARK, ANB, APU, AWT -
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Number of ribs: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Number of Teeth: 150
- Manufacturer: MAGNETI MARELLI
- Name: MM MTKQ072P
- Engine Code: AWT
- Construction Year from: 06.2000
- Construction Year to: 07.2000
- Vehicle Identification Number (VIN) to: 8D..1..042 384
- Number of Teeth: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Number of track rollers: 2
- Supplementary Article/Info 2: without tensioner element
- Manufacturer: BOSCH
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Engine Code: AWT
- Belt Width [mm]: 23
- Colour: black
- Supplementary Article/Info 2: with tensioner pulley damper
- Number of Teeth: 150
- Belts: with rounded tooth profile
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: SKF
-
Engine Code: AEB,
ANB, APU - Construction Year to: 07.1998
- Block Separation:
- Vehicle Identification Number (VIN) from: 8D..T..155 010
- Construction Year from: 08.1998
- Number of Teeth: 153
-
Length [mm]: 1,
224 - Width [mm]: 25
- Tooth Pitch [mm]: 8
- Number of track rollers: 3
- Name: Hammasrihma komplekt
- Manufacturer: BOS
Vehicle Equipment: for vehicles without converted timing belt kit, for vehicles with converted timing belt kit Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper
- Engine Code: AWT
- Construction Year from: 08.2000
- Vehicle Identification Number (VIN) from: 8D..1..042 385
- Number of Teeth: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Tooth Pitch [mm]: 8
- Number of track rollers: 2
- Manufacturer: BOSCH
Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Engine Code: AWT
- Number of belts: 1
- Weight [kg]: 2.4
-
Name: AI WPK-
937705 - Manufacturer: AIRTEX
- Construction Year to: 09.2001
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 -
Article number of the recommended special tool: GAT4840A,
GAT4844, GAT4741 - Observe technical data:
- Name: Hammasrihma komplekt
- Manufacturer: GAT
- Engine Code: APU
-
Supplementary Article/Supplementary Info: with water pump,
with coolant - Number of belts: 1
- Supplementary Article/Info 2: with fastening material
- Pulleys contained: 1
- Operating Mode: Mechanical
- Number of Teeth: 138
- Width [mm]: 23
- Weight [kg]: 6.128
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AWT
- Construction Year from: 06.2000
- Construction Year to: 07.2000
- Vehicle Identification Number (VIN) to: 8D..1..042 384
-
Length [mm]: 1,
200 - Number of Teeth: 150
- Width [mm]: 23
- Tooth Pitch [mm]: 8
- Pulleys contained: 2
- Supplementary Article/Info 2: without tensioner element
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: BOS
- Engine Code: AWT
- Construction Year from: 08.2000
- Vehicle Identification Number (VIN) from: 8D..1..042 385
-
Length [mm]: 1,
200 - Number of Teeth: 150
- Width [mm]: 23
- Tooth Pitch [mm]: 8
- Pulleys contained: 2
- Supplementary Article/Info 2: without tensioner element
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: BOS
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.06
- Number of Teeth: 150
- Width [mm]: 23
- Alternatively:
- Tensioner Pulley Actuation: Mechanical
-
Technical Information: Please note:
Technical Info in the attachment - Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
- Driven Units: Camshaft
-
Trim Level: Ch T-
155 001> - Number of Teeth: 153
- Width [mm]: 25
-
Length [mm]: 1,
224 - Number of belts: 1
- Pulleys contained: 3
- Weight [kg]: 1.4
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: DAY
- Engine Code: AWT
- Construction Year from: 06.2000
- Construction Year to: 07.2000
- Vehicle Identification Number (VIN) to: 8D..1..042 384
-
Length [mm]: 1,
200 - Number of Teeth: 150
- Width [mm]: 23
- Tooth Pitch [mm]: 8
- Pulleys contained: 2
- Supplementary Article/Info 2: with tensioner pulley damper
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: BOS
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Engine Code: AWT
- Water pump impeller material: Plastic
- Belt Width [mm]: 23
- Number of Teeth: 150
- Belts: with rounded tooth profile
- Manufacturer: SKF
-
Name: SK VKMC01170-
1
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of Teeth 1: 153
- Manufacturer: SNR
- Name: SN KD457.55
-
Engine Code: AEB,
ANB, APU, ARK -
Vehicle Identification Number (VIN) from: 8D-
T- 155 010 - Block Separation:
- Engine Number from: 020 001
- Number of Teeth 1: 153
- Width 1 [mm]: 25
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Engine Code: AWT
- Water pump impeller material: Plastic
- Belt Width [mm]: 23
-
Supplementary Article/Info 2: with tensioner pulley damper,
with studs - Number of Teeth: 150
- Belts: with rounded tooth profile
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: SKF
- Driven Units: Camshaft
- Trim Level: AWT AWT
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 2.4
- Manufacturer: DAYCO
- Driven Units: Camshaft
- Trim Level: Ch 1 042 385>
- Number of Teeth: 150
- Width [mm]: 23
-
Length [mm]: 1,
200 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 2
- Tensioner Pulley Actuation: Mechanical
- Manufacturer: DAYCO
- Name: DA KTBWP9750
-
Engine Code: ARK,
ANB, APU, AEB - Number of Teeth: 153
- Driven Units: Camshaft
- Width [mm]: 25
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with tensioner pulley damper
- Manufacturer: OPTIMAL ZAWIESZENIE
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 150
- Weight [kg]: 1.853
- Width [mm]: 23
- Tensioner Pulley Actuation: Hydraulic
- Technical Information: Kit for reuse of the existing hydraulic damper
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: CON
-
Engine Code: AEB,
ARK, ANB, APU, AWT -
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Number of ribs: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Number of Teeth: 150
- Manufacturer: MAGNETI MARELLI
- Name: MM MTKQ025P
- Number of Teeth: 150
- Width [mm]: 23
- Number of belts: 1
- Weight [kg]: 2.62
- for article number: A186
- Name: DO KD167
- Manufacturer: DOLZ
- Construction Year to: 09.2001
- Driven Units: Camshaft
-
Engine Code: AEB,
ANB, APU, ARK - Supplementary Article/Info 2: with tensioner pulley damper
-
Article number of the recommended special tool: GAT4740,
GAT4844, GAT4741 - Observe technical data:
- Name: Hammasrihma komplekt
- Manufacturer: GAT
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Number of Teeth 1: 150
- Width 1 [mm]: 23
- Supplementary Article/Supplementary Info: with water pump
- Observe service information:
- SVHC: No SVHC present!
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: INA
- Number of belts: 1
- Number of track rollers: 2
- Width 1 [mm]: 23
- Number of Teeth 1: 150
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN KDP457.450
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Number of Teeth 1: 150
- Width 1 [mm]: 23
- Supplementary Article/Supplementary Info: with water pump
- Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: INA
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.42
- Number of Teeth: 150
- Width [mm]: 23
- Supplementary Article/Info 2: with tensioner pulley damper
- Alternatively:
- Pulleys contained: 2
-
Technical Information: Please note:
Technical Info in the attachment - Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
- Number of belts: 1
- Number of track rollers: 2
- Width 1 [mm]: 23
- Number of Teeth 1: 150
-
Manufacturer: SNR /
NTN- SNR/
- Construction Year to: 09.2001
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 -
Article number of the recommended special tool: GAT4840A,
GAT4844, GAT4741 - Supplementary Article/Supplementary Info: with water pump
- Observe technical data:
- Name: Veepump hammasrihmakomplekt
- Manufacturer: GAT
- Construction Year to: 09.2001
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Supplementary Article/Info 2: with tensioner pulley damper
-
Article number of the recommended special tool: GAT4840A,
GAT4844, GAT4741 - Supplementary Article/Supplementary Info: with water pump
- Observe technical data:
- Name: Veepump hammasrihmakomplekt
- Manufacturer: GAT
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 001 - Engine Code: AEB
- Belt Width [mm]: 25
- Colour: black
- Number of Teeth: 153
- Belts: with rounded tooth profile
- Manufacturer: SKF
- Name: SK VKMA01908
-
Engine Code: ANB,
APU, AEB - Block Separation:
- Engine Number from: 020 001
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 001 - Width [mm]: 25
- Number of Teeth: 153
- Belts: with rounded tooth profile
- Weight [kg]: 1.391
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
-
Trim Level: Ch T-
155 001> - Number of Teeth: 153
- Width [mm]: 25
-
Length [mm]: 1,
224 - Number of belts: 1
- Pulleys contained: 2
- Weight [kg]: 1.3
- Manufacturer: DAYCO
- Name: DA KTB463
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) from: 8D-
1- 042 385 - Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 150
- Weight [kg]: 1.725
- Width [mm]: 23
- Tensioner Pulley Actuation: Mechanical
-
Technical Information: Please note:
Technical Info in the attachment - Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: CON
- Engine Code: AWT
- Construction Year from: 08.2000
- Vehicle Identification Number (VIN) from: 8D..1..042 385
-
Length [mm]: 1,
200 - Number of Teeth: 150
- Width [mm]: 23
- Tooth Pitch [mm]: 8
- Pulleys contained: 2
- Supplementary Article/Info 2: with tensioner pulley damper
- Name: Veepump hammasrihmakomplekt
- Manufacturer: BOS
- Engine Code: AEB
-
Vehicle Identification Number (VIN) to: 8D-
T- 155 009 - Number of Teeth 1: 153
- Width 1 [mm]: 25
- Observe service information:
- SVHC: No SVHC present!
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: INA
- Engine Code: AWT
- Construction Year from: 06.2000
- Construction Year to: 07.2000
- Vehicle Identification Number (VIN) to: 8D..1..042 384
- Number of Teeth: 150
-
Length [mm]: 1,
200 - Width [mm]: 23
- Number of track rollers: 2
- Manufacturer: BOSCH
Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper
- Driven Units: Camshaft
- Engine Code: AWT
-
Vehicle Identification Number (VIN) to: 8D-
1- 042 384 - Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 150
- Weight [kg]: 2.119
- Width [mm]: 23
- Supplementary Article/Info 2: with tensioner pulley damper
- Tensioner Pulley Actuation: Hydraulic
-
Technical Information: Please note:
Technical Info in the attachment - Name: VEEPUMP HAMMASRIHMAKOMPLEKT
- Manufacturer: CON
- Driven Units: Camshaft
-
Engine Code: APU,
ARK, ANB, AEB - Block Separation:
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 010 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.46
- Number of Teeth: 153
- Width [mm]: 25
- Supplementary Article/Info 2: with tensioner pulley damper
- Alternatively:
- Pulleys contained: 2
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
Technical Information: According to VW AG, there can be deviations in the assignmen, t of chassis numbers., Please note: Technical Info in the attachment
- Driven Units: Camshaft
-
Engine Code: APU,
ARK, ANB, AEB - Block Separation:
-
Vehicle Identification Number (VIN) from: 8D-
T- 155 010 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.298
- Number of Teeth: 153
- Width [mm]: 25
- Supplementary Article/Info 2: with tensioner pulley damper
- Pulleys contained: 1
- Name: HAMMASRIHMA KOMPLEKT
- Manufacturer: CON
Technical Information: According to VW AG, there can be deviations in the assignmen, t of chassis numbers., Please note: Technical Info in the attachment
- Driven Units: Camshaft
- Engine Code: AEB
-
Vehicle Identification Number (VIN) to: 8D-
T- 155 009 - Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.43
- Number of Teeth: 153
- Width [mm]: 25
- Supplementary Article/Info 2: with tensioner pulley damper
- Alternatively:
- Pulleys contained: 2
- Manufacturer: CONTITECH
Technical Information: According to VW AG, there can be deviations in the assignmen, t of chassis numbers., Please note: Technical Info in the attachment