• Vehicle Equipment: for vehicles with rear window cleaning
• Fitting Position: Front and Rear
• Pump Type: Dual Pump
• Lisainfo: Washer pump
• Additional information: Washer pump

• Pump Type: Mono Pump
• Voltage [V]: 12
• Number of pins: 2
• Component Number: 103-02-004
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of pins: 2
• Component Number: 103-02-001
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Equipment: for vehicles with rear window cleaning
• Manufacturer: ASHIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 2
• Pump Type: Dual Pump
• Manufacturer: ERA

• Pump Type: Mono Pump
• Material: Plastic
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.095
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA

• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Mono Pump
• Connector Shape: D Shape
• Manufacturer: ERA

• Number of connectors: 1
• Pump Type: Mono Pump
• Voltage [V]: 12
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MAX

• Voltage [V]: 12
• Operating Mode: Electric
• Vehicle Equipment: for vehicles without rear window cleaning
• Number of pins: 2
• Pump Type: Mono Pump
• Manufacturer: ERA

• Operating Mode: Electric
• Pump Type: Mono Pump
• Voltage [V]: 12
• Number of pins: 2
• Outlet Ø [mm]: 3.4
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MEY
• Lisainfo: 1009550006
• Additional information: 1009550006

• for OE number: 210 869 0821
• Operating Mode: Electric
• Number of connectors: 1
• Manufacturer: TRUCKTEC

• Pump Type: Mono Pump
• Material: Plastic
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.095
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Pump Type: Dual Pump
• Manufacturer: ERA

• Pump Type: Dual Pump
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.085
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA

• Operating Mode: Electric
• Fitting Position: Front
• Weight [kg]: 0.25
• Voltage [V]: 12
• Pump Type: Mono Pump
• Manufacturer: 3RG

• Number of connectors: 2
• Fitting Position: Front and Rear
• Pump Type: Dual Pump
• Connector Shape: rectangular
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Pump Type: Dual Pump
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.109
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump; front
• Manufacturer: VIKA

• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of pins: 2
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MAX

Pump Type: Dual Pump

• Plug Type: Blade Terminal Sleeve
• Plug housing design: Plug sleeve housing
• Number of pins: 2
• Manufacturer Restriction: Mercedes-Benz, VAG, Scania
• Socket Width [mm]: 2.8
• Cable Cross Section [mm²]: 0.75
• Protection Type (IP Code): IP X7
• Cable Length [mm]: 500
• for article number: 82710249, 82710380, 82710396
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with hose
• Supplementary Article/Info 2: with pipe
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, keskne elektrissteem
• Manufacturer: HBE
• Lisainfo: 50390266
• Additional information: 50390266

• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Dual Pump
• Connector Shape: rectangular
• Manufacturer: ERA

• Number of connectors: 2
• for OE number: 1H6955651
• Manufacturer: MEAT&DORIA

• Vehicle Equipment: for vehicles with rear window cleaning
• Voltage [V]: 12
• Operating Mode: Electric
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 15SKV015
• Manufacturer: ESEN SKV

• Number of connectors: 2
• Fitting Position: Front and Rear
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of pins: 2
• Outlet Ø 1 [mm]: 3.5
• Outlet Ø 2 [mm]: 3.5
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MEY
• Lisainfo: 1009550005
• Additional information: 1009550005

• Voltage [V]: 12
• Weight [kg]: 0.095
• Number of connectors: 2
• Supplementary Article/Info 2: for window cleaning system
• Pump Type: Mono Pump
• Manufacturer: METALCAUCHO

• Voltage [V]: 12
• Fitting Position: Front
• Length [mm]: 35.4
• Width [mm]: 47
• Height [mm]: 113.7
• Weight [kg]: 0.088
• Operating Mode: Electric
• Vehicle Equipment: for vehicles without check control system
• Pump Type: Diaphragm Pump
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric
• Voltage [V]: 12
• Pump Type: Mono Pump
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Voltage [V]: 12
• Weight [kg]: 0.105
• Number of connectors: 2
• Supplementary Article/Info 2: for window cleaning system
• Pump Type: Dual Pump
• Manufacturer: METALCAUCHO

• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Mono Pump
• Manufacturer: ERA

• Vehicle Equipment: for vehicles with rear window cleaning
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Dual Pump
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.105
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 1
• Fitting Position: Front
• Pump Type: Mono Pump
• Voltage [V]: 12
• Number of pins: 2
• Outlet Ø [mm]: 3.7
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MEY

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.001
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Pump Type: Dual Pump
• Number of connectors: 2
• Vehicle Equipment: for vehicles with rear windown wiper
• Fitting Position: Front
• Manufacturer: METZGER

• Number of connectors: 2
• Vehicle Equipment: for vehicles with rear window cleaning
• Fitting Position: Front and Rear
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of pins: 2
• Outlet Ø 1 [mm]: 3.4
• Outlet Ø 2 [mm]: 3.4
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: MEY
• Lisainfo: 1009550010 koodiga LTD-1K6955651
• Additional information: 1009550010 koodiga LTD-1K6955651

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.105
• Name: SW 10 92 6259
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pump Type: Mono Pump
• Number of pins: 2
• Vehicle Equipment: for vehicles with headlamp cleaning system
• Fabrication Number: ESP-AU-000
• Manufacturer: NTY

• Voltage [V]: 12
• Length [mm]: 61.5
• Width [mm]: 55.4
• Height [mm]: 102
• Weight [kg]: 0.102
• Operating Mode: Electric
• Pump Type: Dual Pump
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pump Type: Dual Pump
• Number of pins: 2

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.122
• Name: KLAASIPESUVEE PUMP,KLAASIPUHASTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.122
• Manufacturer: SWAG
• Name: SW 40 91 0275

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Plug Type ID: 3
• Pump Type: Mono Pump
• Name: Klaasipesuvee pump,klaasipuhastus
• Manufacturer: VDO

• Voltage [V]: 12
• Plug Type ID: 3
• Pump Type: Dual Pump
• Name: Klaasipesuvee pump,klaasipuhastus
• Manufacturer: VDO

• Pump Type: Mono Pump
• Material: Plastic
• Supplementary Article/Info 2: for headlamp cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.175
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA