• Fitting Position: Front Axle Left, Front Axle Right
• Bearing Type: Angular Ball Bearing
• Manufacturer: JP-GROUP
• Lisainfo: Ball bearing for strut bearing, upper
• Additional information: Ball bearing for strut bearing, upper

• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut with bearing, front
• Additional information: Bearing for strut with bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Repair kit for strut mount
• Additional information: Repair kit for strut mount

• Fabrication Number: AD-VW-010
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Construction Year from: 06.1997
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 14
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Height [mm]: 13.5
• Weight [kg]: 0.08
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 45.5
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• Required quantity: 2
• Inner Diameter [mm]: 14
• Fitting Position: Front Axle
• Manufacturer: TEDGUM
• Name: TG 00722859

• Fitting Position: Front Axle
• Height [mm]: 14
• Outer Diameter [mm]: 45
• Inner Diameter 1 [mm]: 14
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Left
• Weight [g]: 65
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Name: IM 32295/1
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: FEB
• Additional information: FE01111
• Lisainfo: FE01111

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Width [mm]: 13.5
• Weight [kg]: 0.08
• Required quantity: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Quality/ Grade: 12, P6
• General Information: deep groove ball thrust bearing; front
• Manufacturer: VIKA

• Model Year from: 1996
• Fitting Position: Front Axle
• Weight [kg]: 0.065
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.5
• Packaging height [cm]: 1.4
• Manufacturer: FEBEST

• Construction Year from: 06.1997
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: LMI

for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!

• Width [mm]: 13.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.08
• Name: SW 30 54 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Lisainfo: Top strut mounting without bearing
• Additional information: Top strut mounting without bearing

• Construction Year from: 06.1997
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik VW P. GOLF 91- PASSAT
• Manufacturer: SAA

for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!

• Construction Year from: 06.1997
• Fitting Position: Front Axle
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Height [mm]: 13.5
• Bearing Type: Rolling Bearing
• Name: Laager - K„„ndmik VW GOLF/PASSAT 91-
• Manufacturer: MEY

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle
• Bearing Type: Angular Ball Bearing
• Material: Plastic, Metal
• Quantity per axle: 2
• Alternative Repair Kit: 6490035, 6490247
• Manufacturer: METZGER

• Fitting Position: Right, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Manufacturer: SNR
• Name: SN M254.01

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814007510

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 45
• Inner Diameter [mm]: 14
• Material: Plastic
• for OE number: 1J0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Quantity per axle: 2
• Manufacturer: SKF
• Name: SK VKD35110

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-014
• Manufacturer: NTY
• Name: NTY AD-VW-014

• Construction Year from: 06.1997
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Name: Laager - K„„ndmik. VW P. GOLF 3/P
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.3
• Required quantity: 2
• Alternative Repair Kit: 21652902
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 21652281

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.322
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. VW P. GOLF 3/P
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Quantity Unit: Piece
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 3/P
• Manufacturer: MEY

General Information: MEYLE recomments to use the reinforced version (HD)

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.322
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 54 0008

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle both sides
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW/FORD
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT/VW/FORD
(kvaliteediklass: PJ)"

• Construction Year from: 06.1997
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 357 412 331 A, 7201848, 7M0 412 331, 95VW-3K031-AA
• Alternative Repair Kit: 26642 01
• Name: Laager - K„„ndmik. VW P. GOLF 3/PASSAT
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 06.1997
• Quantity per axle: 2
• Alternative Repair Kit: 802 261
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 357 412 331 A, 7201848, 7M0 412 331, 95VW-3K031-AA
• Name: Laager - K„„ndmik. VW P. GOLF 2,0-2,8 91-/ PASSAT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 01.1996
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7M0 412 331 A
• Manufacturer: GSP

• Fitting Position: Front Axle
• for OE number: 357412331A
• Manufacturer: SASIC

• Diameter [mm]: 97
• Quantity Unit: Set
• Fitting Position: Front Axle
• Height [mm]: 52
• Weight [kg]: 0.445
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 50
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 97
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 21652902

• Thickness [mm]: 50
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 97
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: SWAG
• Name: SW 30 55 0002
• Lisainfo: 30 55 0002 SWA
• Additional information: 30 55 0002 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.5
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Name:
• Manufacturer: FEB
• Additional information: FE14116
• Lisainfo: FE14116

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Name: COC 80001633
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• reinforced version:
• Quantity Unit: Piece
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 3/PASSAT HD
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Construction Year from: 01.1996
• Supplementary Article/Info 2: with ball bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Right, Front Axle Left
• Material: Rubber/Metal
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 97
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: FAST

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 55 0011
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.1997
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik. VW P. GOLF 2,0
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 01.1996
• Fitting Position: Front Axle
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Construction Year from: 06.1997
• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik. VW P. GOLF 3/P
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF 3/P
• Manufacturer: MEY
• Lisainfo: 1004120003/S
• Additional information: 1004120003/S

General Information: MEYLE recomments to use the reinforced version (HD)

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle
• Quantity per axle: 1
• General Information: Twin Pack for axle repair
• Name: Laager - K„„ndmik VW KPL.
• Manufacturer: SKF

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Outer Diameter [mm]: 97
• Supplementary Article/Info 2: with rolling bearing
• Alternative Repair Kit: 6490076, 6490031
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• reinforced version:
• Quantity Unit: Set
• Alternative Repair Kit: 100 412 1020/S
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF
• Name: SK VKDA35110

• Fitting Position: Front Axle, Front Axle both sides
• Supplementary Article/Info 2: with bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW/FORD/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW/FORD/SEAT
(kvaliteediklass: PJ)"

• Construction Year from: 06.1997
• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with rolling bearing
• Warranty: 5 years warranty
• Packaging length [cm]: 13.6
• Packaging width [cm]: 11.8
• Packaging height [cm]: 11.4
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Height [mm]: 50
• Required quantity: 2
• Material: Rubber/Metal
• Outer Diameter [mm]: 97
• Centering Diameter [mm]: 14.2
• Supplementary Article/Info 2: with bearing
• Manufacturer: TRW AMORTYZATORY

for OE number: 1J0412249, 357 412 249 A, 3574-12319-B, 3574-1233-1A, 357412249, 6K0 413 031 B, 7201848 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/

• Construction Year from: 01.1996
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Construction Year from: 01.1996
• Fitting Position: Front Axle both sides
• Quality class: PJ
• Name: Suspension strut support bearing left=right

• Model Year from: 1996
• Fitting Position: Front Axle
• Weight [kg]: 0.352
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 5.2
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BIL

Name: Laager - K„„ndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• for components see parts list:
• Number of Parts [parts]: 2
• Weight [g]: 0.409
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Alternative Repair Kit: 100 412 0019/S
• Full Set:
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM NA DWIE STRONY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• reinforced version:
• Alternative Repair Kit: 100 412 9020/S
• Full Set:
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. GOLF3/PASSAT 2 STRONY
• Manufacturer: MEY
• Lisainfo: 1004121020/S
• Additional information: 1004121020/S