Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 06.1997
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - for OE number: 021906265AK
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 785
- Number of pins: 4
- Weight [g]: 119
- Gross Weight [g]: 149
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
PASSAT VARIANT (3A5,
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3A5,
(kvaliteediklass: Q)"
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: JAPKO
- Construction Year from: 06.1997
-
Lambda Sensor: Regulating Probe,
Finger probe - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
505 -
Additional information: MGS-
505
- Construction Year from: 06.1997
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 06.1996
- Engine Code: AEE
- Voltage [V]: 12
- Length [mm]: 550
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV030
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Fitting Position: before catalytic converter
- Block Separation:
- Construction Year from: 06.1996
- Engine Code: AEE
- Cable Length [mm]: 720
- Manufacturer: DELPHI
-
Name: DE ES10979-
12B1
- Conductor Number: 4
- Length [mm]: 575
- Resistor [Ohm]: 2.1
- Number of circuits: 4
- Cable Length [mm]: 575
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Construction Year from: 06.1997
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 885
- Number of circuits: 4
- Weight [kg]: 0.19
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV599
- Manufacturer: ESEN SKV
- Construction Year from: 06.1997
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: AEE
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 01.1997
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Finger probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 570
- Number of pins: 4
- Fitting Position: before catalytic converter
- Name: Lambda andur
- Manufacturer: MEY
- Lambda Sensor: Regulating Probe
- Construction Year from: 06.1996
- Fitting Position: before catalytic converter
- Length [mm]: 570
- Number of pins: 4
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- Construction Year from: 06.1997
- Engine Code: AEE
- Fitting Position: before catalytic converter
-
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 570
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.15
- Name: VA 368478
- Manufacturer: VALEO
- Engine Code: AEE
- Construction Year to: 05.1996
- Lambda Sensor: Regulating Probe
- Length [mm]: 620
- Number of pins: 4
- Technical Information Number: Universal 77004
- Fitting Position: before catalytic converter
- Manufacturer: FAE
- Construction Year from: 06.1997
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 580
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Name: BS 0258003542
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks