Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- General Information: protecrion lid; wheel hub
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
-
Fabrication Number: KLT-
VW- 004P
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth: 22
- for OE number: 357 407 615
- Braking/Drive Dynamics: for vehicles without ABC
- Outer Diameter [mm]: 40
- Manufacturer: DELLO AUTOMEGA
- Braking/Drive Dynamics: for vehicles with ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: DELLO AUTOMEGA
- old version:
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.435
- for OE number: 357 407 615 A
- Supplementary Article/Info 2: without wheel bearing
- Name: RATTARUMM
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Thickness [mm]: 87
- Length [mm]: 87
- Width [mm]: 102
- Weight [kg]: 0.88
- Required quantity: 2
- General Information: wheel hub
- Manufacturer: VIKA
-
Braking/Drive Dynamics: for vehicles with ABS,
for vehicles without ABS - Diameter [mm]: 40
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Fitting Position: Front Axle
- Weight [kg]: 1.613
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of Teeth: 22
- Fitting Position: Front Axle both sides
- Height [mm]: 74
- Weight [kg]: 1.43
- Drum diameter [mm]: 40
- Inner Diameter [mm]: 22.9
- Outer Diameter [mm]: 120.5
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 57
- Manufacturer: METALCAUCHO
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
-
Supplementary Article/Info 2: without wheel bearing,
with ABS sensor ring -
Fitting Position: Front Axle Left,
Front Axle Right - Name: RATTARUMM
- Manufacturer: MAX
- new version:
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Fitting Position: Front Axle
- Weight [kg]: 1.435
-
Supplementary Article/Info 2: with ABS sensor ring,
without wheel bearing - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Teeth: 22
- Fitting Position: Front Axle
- Height [mm]: 74
- Weight [kg]: 1.435
- Drum diameter [mm]: 65
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 120.5
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 57
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without wheel bearing
- Rim Hole Number: 4
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub for disc brake,
front, 40 mm -
Additional information: Wheel hub for disc brake,
front, 40 mm
- Fitting Position: Front Axle
- Outer Diameter [mm]: 121
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 4
- Number of Teeth: 22
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: without wheel bearing, with bores for ABS sensor ring
- for OE number: 357 407 615 A
- Rim Hole Number: 4
- Number of Teeth: 22
-
Fitting Position: Front Axle Left,
Front Axle Right -
Thread Size: M12X1,
5 - Outer Diameter [mm]: 121
- Manufacturer: GSP
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 4
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub with bearing,
rear -
Additional information: Wheel hub with bearing,
rear
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring
- for OE number: 357 407 615
- Rim Hole Number: 4
- Number of Teeth: 22
- Fitting Position: Front Axle
-
Thread Size: M12X1,
5 - Outer Diameter [mm]: 120.5
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Bearing Type: Angular Ball Bearing
- Width [mm]: 64
- Weight [kg]: 1.6
- Required quantity: 2
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- General Information: wheel hub with bearing; rear
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 9K-
X- 541901 - Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without attachment material
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth, ABS ring: 43
- Rim Hole Number: 4
- Number of Teeth: 43
- Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring